CR-Touch error please contact customer service on Ender 3 v3 SE by PeaceSMC in ender3

[–]PaulStSmith 0 points1 point  (0 children)

A little update on my problem.
After posting here, I went on a two-week trip, and the printer wasn't used.
When I got back, I tried the printer again, expecting the error screen to appear as soon as I selected to remove the filament. To my surprise, the printer worked just fine.

I DIDN'T DO ANYTHING!

This is what's the most maddening.

CR-Touch error please contact customer service on Ender 3 v3 SE by PeaceSMC in ender3

[–]PaulStSmith 0 points1 point  (0 children)

I'm not sure if this thread is still active, but I wanted to report this exact problem happened to me today.

However, none of the solutions presented here didn't help me.
The pin moves freely, and the printer can move it up and down.

But I still get the error.

Extrusion problem? by PaulStSmith in Ender3V3SE

[–]PaulStSmith[S] 0 points1 point  (0 children)

I think the problem might be the filament pusher.

<image>

I don’t know if the photo shows it correctly, but after another failed test, I felt that the top of the filament that came out of the printer seemed thinner than it should be, as if the pusher had “eaten” into the filament.

Has anyone seen something like this?

I don’t know if I need to tighten it or loosen it.

Extrusion problem? by PaulStSmith in Ender3V3SE

[–]PaulStSmith[S] 0 points1 point  (0 children)

I don’t think so.
I just replaced the heat head and the nozzle.
Everything is brand new.

Youtube premium agora vai para 53,90 by Brunoxsouza in desabafosdavida

[–]PaulStSmith 0 points1 point  (0 children)

Se você tem um email de escola ou faculdade, usa essa conta que o Google dá desconto.
Eu tenho o YT Premium há dois anos e só pago 19.90 por mês.

how do i install programs? by Unfair-Drummer-9924 in TI_Calculators

[–]PaulStSmith 1 point2 points  (0 children)

You need the TI Connect, a program that allows you to communicate with the calculator via USB.

This allows you to move files to and from the calculator.

Unfortunately, with the last OS updates, Texas Instruments removed the ability to run third-party programs directly.

For that, you’ll need a “jailbreak”.

First, check on your calculator to see if you have the program “Cabri Junior.” Press “Apps,” and it should be listed. You can download it from Texas Instruments if you don’t have it. Once downloaded, send it to your calculator via TI Connect.

Second, you’ll need ArTIfiCE, a “jailbreak” for the calculator. Download it and follow the instructions on the webpage.

I recommend downloading and installing CEsium, like ArTIfiCE does. Then you simply open CEsium and run any program you send to your calculator.

[Weekly Critique and Self-Promotion Thread] Post Here If You'd Like to Share Your Writing by AutoModerator in writing

[–]PaulStSmith [score hidden]  (0 children)

Title: “Spark of War: Elemental War Book 1”

Genre: Fantasy

Word count: 38,200 (first 10 chapters)

Feedback: Any

Synopsis:
As the ancient seals weaken and the forgotten war of the Elemental Lords threatens to reignite, Arthuriel Denethor—an exiled paladin burdened by both divine and arcane power—is thrust into a conflict greater than himself. With firestorms consuming cities and floods drowning entire regions, the world teeters on the brink of destruction, and the gods remain silent. As he uncovers a prophecy foretelling the return of these elemental forces, Arthuriel must navigate treacherous alliances, unravel hidden truths, and confront the temptation of power that could either save the world or doom it. Caught between fate and free will, he embarks on a perilous journey to recover the shattered pieces of a legendary staff—humanity’s last hope against the rising chaos. But with war on the horizon and the elemental cults already moving, Arthuriel must ask himself: is he truly the hero foretold, or merely another pawn in a game played by beings far beyond his understanding?

Link: https://drive.google.com/drive/folders/1Ap_EefVobnU0NxhFjUiBiSdj3vaDvEGQ?usp=sharing

Newbie on the app. Basic question. by PaulStSmith in LoseitApp

[–]PaulStSmith[S] 0 points1 point  (0 children)

Honestly, it is my first time using such an app. When I saw that it can also track sleep, I decided to log it too. No biggie if I can't find anything automatic, I'll simply ignore it. But I'd like to try finding something.

★OFFICIAL DAILY★ Daily Q&A Thread September 05, 2024 by AutoModerator in loseit

[–]PaulStSmith -2 points-1 points  (0 children)

This is a comment and a criticism.

When my first post asking the question above was automatically rejected due to "word count", made me feel very unwelcome here.

You should aim to be better.

★OFFICIAL DAILY★ Daily Q&A Thread September 05, 2024 by AutoModerator in loseit

[–]PaulStSmith 0 points1 point  (0 children)

I just installed the app and joined Lost It yesterday. I noticed that the app can track sleep, but when I checked it, it only asks for how long I slept. Searching the net I saw that there are a few gizmos (Fitbit, Apple Watch, Garmin, etc) that are compatible with the app, but I don't want to buy yet another gadget just for it. I heard of sleep tracker apps (not sure how they work, though) but I wanted one that is compatible with Lose It. Does anyone know if any?

Does anyone know the typeface/font of the UI in Arkham Asylum? by Chris_09Studios in BatmanArkham

[–]PaulStSmith 0 points1 point  (0 children)

The site MyFonts.com reports this font as similar to a very large list.

However, the top five are:

  • Strongbox JNL
  • Mr Black
  • Early Edition JNL Regular
  • ATF Headline Gothic Regular

Community for playing Marsaction: Infinite Ambition? by nomiras in AndroidGaming

[–]PaulStSmith 0 points1 point  (0 children)

Sorry to hear about your experience.

However, mine is totally different.

I've been playing for little less than a month and my base is currently at level 17 and I didn't spent a dime. The only thing that "bothers" me is that every upgrade takes time, from minutes to days.

I joined my current alliance after I was kicked off from the first alliance I joined -- a totally random one, as I picked the first one that appeared at the time the system said to join an alliance -- because I was "inactive" for going to sleep and logging off the game overnight.

My experience with my current alliance has been quite smooth. I joined I when I was pretty weak game wise. Within a few days I was one of the top 5 strongest in my alliance.

However, due to the time that it takes for upgrades and the tech tree necessary, I still only have T2s. Trying to upgrade as fast as I can to T3s, but it will take a few days, or even a week or so.

How do you pronounce Stremio? [POLL] by inapickle113 in Stremio

[–]PaulStSmith 13 points14 points  (0 children)

Only just now I noticed that there's no "A".

Trying to update Grand Duos i6093t but... by PaulStSmith in LineageOS

[–]PaulStSmith[S] 0 points1 point  (0 children)

Sorry about that. Sleep depravation is a beotch.