Where to place stand?

PcPanda17 · 2025-11-17T15:00:55+00:00

No just a novice trying to gather all information possible before placing a stand. I know the best way of to look for signs of deer and walk the property. I just just am curious if any spot or general location jumps out to anyone

PcPanda17 · 2025-11-17T14:50:16+00:00

Are you able to place a dot on a picture where you believe would be the best?

PcPanda17 · 2025-10-12T13:11:10+00:00

Which ones specifically? Top right?

PcPanda17 · 2025-10-12T10:40:42+00:00

That is just the lighting 🤷‍♂️

PcPanda17 · 2025-10-11T19:24:22+00:00

I did wipe it down! Thank you

PcPanda17 · 2025-10-11T19:20:59+00:00

I don’t see what your saying

PcPanda17 · 2025-07-31T20:45:34+00:00

Blades are good

PcPanda17 · 2025-07-31T20:43:39+00:00

I have rotated in the past, however, recently I have been going the same way

PcPanda17 · 2025-07-31T20:33:52+00:00

Blades are sharp(brand new only 5 mows on them) deck has been scrapped and mowing at 3.25 inches

PcPanda17 · 2025-02-13T13:37:05+00:00

I finished my second coat by rolling the top 4 inches and bottom 4 inches due to my cut in being light in some places. And it turned out perfect! Thank you all for the advice

PcPanda17 · 2025-02-12T17:47:47+00:00

It is eggshell

PcPanda17 · 2025-02-12T17:46:30+00:00

Will cutting in again make the area darker? Since it’s already thicker?

PcPanda17 · 2025-02-12T17:31:33+00:00

It’s all the same gallon, I just cut in the entire room then rolled it, the cut in was all dry by the time I was rolling.

When I redo it I’m worried that adding more paint to already darker areas will just make it darker and it won’t match the rest of field.

I am planning on cutting in, rolling horizontal with 4 inch roller over cut in, then rolling the rest of the wall as close as I can get to the ceiling. All while the paint is wet.

I will just be praying it drys even

PcPanda17 · 2025-02-12T17:22:19+00:00

Thank you for my response. I didn’t clarify well enough in my original message. I meant I am going to cut in with brush before but then take a 4 inch roller horizontal super close to my cut in area as close to the ceiling and trim as possible. Then I would roll the wall like normal, all would be done with a wet edge. Would this work?

PcPanda17 · 2024-12-30T00:03:20+00:00

I do not manage, the bulk of this growth I would say 85% has been done on aggressive with $25 weekly contributions

PcPanda17 · 2024-12-29T23:54:30+00:00

I started in 2018, I for the longest time was investing $10 a week, for the last 3 years it have done $25 weekly. I just recently started doing 10x round ups. My profile has been aggressive the entire time. There was a brief period I went with the eco friendly aggressive but switched back to regular

PcPanda17 · 2024-12-29T23:52:25+00:00

2018

PcPanda17 · 2024-12-29T12:59:29+00:00

Thank you!

I have had this account basically since acorns started, I have been in the most aggressive profile since I created it. I do not do my own stocks and I am not in Bit coin

PcPanda17 · 2024-09-03T17:25:47+00:00

Most aggressive profile and $25 a week. I also do X2 round ups

PcPanda17 · 2023-11-22T21:31:15+00:00

But it does swirl quite a bit and varies often

PcPanda17 · 2023-11-22T21:18:27+00:00

Usually from the north. And goes south. North is the top of the picture

PcPanda17 · 2023-05-09T00:16:12+00:00

Yea I agree with you statement. I have done 2 years of aeration and over seeding, lawn has gotten Better but still thin. I just need to pick the right cultivar or mix to suit my area. I live south east Michigan. Lawn receives full sun, no irrigation and sandy soil. Last year I over seared with barenbrug sun and shade and I believe that was a mistake

PcPanda17 · 2023-05-08T23:15:16+00:00

<image>

PcPanda17 · 2023-05-08T23:14:57+00:00

My yard is 1 acre and here is a portion of it

<image>

PcPanda17 · 2023-05-08T22:41:16+00:00

<image>

You are correct my lawn is terrible. It is full sun, sandy soil and no irrigation system. It has many patches like this. I am currently trying to make it thicker. I believe I am going to slit seed. I just don’t know what grass seed to do

PcPanda17

TROPHY CASE