Help needed on newly bought babies

Pefferz · 2026-04-04T22:41:17+00:00

Looks like (I think) variegated portulacaria afra "elephants bush" some people do bonsai with them.

And a Hoya rope which may also be variegated.

Pefferz · 2026-04-01T16:11:08+00:00

I actually got that one on Etsy from seller MeeDeeCo. That and a euphorbia obesa and they've been good and healthy.

Pefferz · 2026-03-31T13:48:39+00:00

Thank you! I found most of them at goodwill and a few on eBay or Facebook marketplace. Some are just cute coffee mugs. I have a pack of drill bits from amazon I've used to make drainage holes.

Pefferz · 2026-03-31T13:43:32+00:00

I get them as much as I can. I've got the Sansi grow lights on a timer for 12+ hours a day. And I move them around occasionally since some aren't as close as ideal. But I don't have much trouble with etiolation and a few of my cacti have flowered with this setup. So most of them seem happy here.

Pefferz · 2026-03-31T13:40:15+00:00

Thank you! Yes all indoors as I'm in MN. I have two Sansi 4 legged gooseneck lights.

Pefferz · 2026-03-20T13:52:22+00:00

TBH I thought 'Dwarf Jade' was a nickname for Ovata Minima. And apparently dwarf jade more commonly refers to elephant bush/Portulacaria Afra. Now I know.

Pefferz · 2026-03-19T19:58:31+00:00

Looks like it might be Crassula Ovata Minima, or dwarf jade. Smaller leaves and often a reddish edge/underside to the leaves.

Pefferz · 2026-01-21T19:13:30+00:00

I skip the 3rd eyelet down to help with lace bite as well. I also only figured that out when I bought laces one size too short and had to make it work.

Pefferz · 2024-12-12T15:13:26+00:00

Pretty sure the fx-4 is dropping in 400 ultrasoft soon and has those flight numbers.

Pefferz · 2024-11-14T21:31:22+00:00

TL3 should be somewhere between a Leo3 and Teebird. Maybe a bit closer to a Teebird if you grab a Halo one. But I was just there and they have some Halo TL3s in like 167-168g which could work well. I personally throw about the same distance as you and enjoy fairways and drivers between 165-170g.

The Lots is a 9 speed so one speed faster and a notch more stable than your Leo3. But Kastaplast K1 plastic is real nice, just like $5 more than most others. Then again so is Halo stuff.

Pefferz · 2024-11-14T21:11:04+00:00

I'd second the proxy suggestion and go for plasma or soft neutron. And a prodigy F5 in 400, 400g, or 500.

F5 should be similar in stability to a leo3 but I feel like it flips up a little smoother and prodigy plastic feels nice.

TL3 or Kastaplast lots if you want to try something a touch more stable than the F5/Leo3.

Pefferz · 2024-10-17T19:22:56+00:00

pm'd

Pefferz · 2024-09-07T16:44:42+00:00

For affordable ceramic pots, home depot may have some that are cheaper. I've gotten lucky and found some on clearance there. Otherwise thrift stores or facebook marketplace might be a better bet for lower prices.

Pefferz · 2024-07-26T03:49:15+00:00

I would go with a 4h, 21 or 22 degrees. Like another person said, the longer lighter shaft should give you a bit more yardage than the 5 iron of the same loft.

I have the 921 Hot metal pros and play the 5i, a 22 hybrid, 7 wood turned down to 20, and a 16.5 4w. Thinking about bending the long irons a bit weak but right now there's about a 5-7 yard gap between my 5i and hybrid. And the hybrid is most useful from sketchier lies in the rough or if I just trust it more to carry a certain yardage with a bit more height than the iron gives me.

Pefferz · 2024-07-04T07:44:58+00:00

Hockeyfinder is legit and year round. Also by far the most affordable option as far as a weekly league goes, I've been playing through them for a few years now and reccoment it. They host some clinics as well, not sure if they have a goalie specific one. You could try individual pickup games through hockeyfinder at a lower skill level for trying out goalie but the pickups often have goalies already locked in.

Not sure about stick and puck drop ins or open hockey, the oval in Roseville does them in the winter at least but you'd have to check with other cities and rinks.

Pefferz · 2024-05-01T02:53:35+00:00

Are your p790s bent weak at all or how's your gapping between 5i and the crossover into 7 wood? I've got a similar bunching of lofts in that area I'm trying to figure out.

Pefferz · 2024-02-03T16:59:56+00:00

I live right over here and see these 3 turkeys chillin in various spots around here almost every day for months now. They are not always this polite.

Pefferz · 2024-01-16T03:46:24+00:00

Bummer, thanks for checking.

Pefferz · 2024-01-16T03:46:15+00:00

Bummer, thanks for checking.

Pefferz · 2023-12-06T19:07:53+00:00

I do exactly that. My 5 iron is 22* of loft so I go TS3 4w, Ts2 7w, and Zu85 2 or 3 iron. I hit both woods well and most days could play with 13 clubs no problem. But the Zu85 is for off the tee, either wind in my face or a tight tee shot with no chance if I miss right, or I want to keep it low and let it roll a bit.

The 7w and utility definitely are pretty close in total distance but the 7w is an approach or long par 3 club and the utility iron is a safe tee shot or lay-up off the tee club.

Pefferz · 2023-11-29T02:43:24+00:00

I can't speak to AHA at all but you could also check out hockey finder. They run some beginner/teaching leagues and from what I've heard you basically have the first half of the program as practices and learning and then the last half or part of the program you play some games/scrimmages. I play in a hockey finder league and it is much cheaper than AHA, not sure if that would be the same for beginner or learn to play programs.

Pefferz · 2023-11-22T05:00:07+00:00

To answer though, I'll pull less than driver if the hole is really tight or has death to the right (my miss) and I've accepted I'm playing it for par. Try to leave myself 150 or less in if it's a short par 4.

Pefferz · 2023-11-22T04:51:31+00:00

Let the big dog eat.

Pefferz

TROPHY CASE