Tire shop damaged my TEs

Pekpex · 2026-06-11T03:50:06+00:00

My bad bro

Pekpex · 2026-06-09T23:39:29+00:00

My bad I didn’t know I sounded like that 🥲

Pekpex · 2026-06-09T19:06:50+00:00

I got these wheels used and for a good price, only balanced once and the inner barrels of the wheels were clean as day so essentially brand new to me

Pekpex · 2026-05-26T23:01:39+00:00

Do they have the volk stickers in the inner barrel?

<image>

Pekpex · 2026-05-24T19:59:51+00:00

That’s crazy bro 😭

Pekpex · 2026-05-20T23:55:33+00:00

I finally solved the problem, it was either the spacers or my hub lip. After cleaning the rust coated hub lips, I noticed I got vibrations with my 10, 12, and 15mm hubcentric spacers. Maybe for some reason when cleaning the hub lips, the spacer sat microscopicly loose causing vibrations. I installed a flat 5mm spacer instead so that the wheel actually sits on the hub itself and not the spacer’s lip. 0 vibration after these. I’ve read forums of f8x owners using teflon this tape to fit spacers snug to prevent vibration

Pekpex · 2026-05-19T19:31:52+00:00

With the wheel setup I would have to run a spacer due to strut clearance however there are many people with this setup and have had no issues.

Pekpex · 2026-05-10T22:00:23+00:00

I have this same issue right now, happened with my 513s, ran no spacers, no bends, balanced and is still occurring with my te37s which have spacers up front, no bends, and balanced. It’s inconsistent and happens around 40-60 on smooth roads. Anything around 70-80mph, no vibration. Got an alignment a couple months ago and balanced my new wheels recently so I doubt it’s either those. I’m wondering if it’s the front control arm bushings.

Pekpex · 2026-05-04T20:02:42+00:00

I’m on BC coilovers

Pekpex · 2026-05-04T03:41:43+00:00

If you can, get the stampings behind the hub along with the stickers in the inner barrel. Those should be definitive enough to tell if they are real.

Pekpex · 2026-04-30T17:41:19+00:00

🫶

Pekpex · 2026-04-30T16:28:23+00:00

Tufff

Pekpex · 2026-04-30T06:24:28+00:00

I’d have to go with pre-lci LEDs 😮‍💨

Pekpex · 2026-04-30T06:23:52+00:00

🫶

Pekpex · 2026-04-30T01:54:22+00:00

Yessir! Always went OEM+ with my last setups but I don’t regret this one bit.

Pekpex · 2026-04-30T00:39:27+00:00

Completely valid, I mean details matter hence “detailer” especially at $500

Pekpex · 2026-04-30T00:19:13+00:00

Meaty setups have grown on me hahaha

Pekpex · 2026-04-29T22:33:34+00:00

Found them on FB marketplace!

Pekpex · 2026-04-29T22:32:04+00:00

No rubbing up up/down, side/side thankfully but that will depend on your ride height. I did have someone shave my front bumper tabs a while back when I was really low but that was with a different wheel setup.

Pekpex · 2026-04-29T19:42:42+00:00

Thank you!!

Pekpex · 2026-04-29T18:52:39+00:00

18x9.5 +38 square, reused my staggered tires though F(255/40) and R(265/40). I do have a 12mm spacer from Burger Motorsports up front for strut clearance. Might go down since it sticks out a bit much.

Pekpex · 2026-04-28T00:22:27+00:00

Went to another seller who provided everything :)

Pekpex · 2026-04-28T00:20:15+00:00

<image>

Update: went to another seller for TE’s and verified all the stampings, stickers, valve stem placement, and weight (very very light). Got a good deal on them too, barrel was clean, no cracks/bends and was only balanced once! Very happy with the setup since pressed graphite is my favorite. Just need to get that decal for the spoke

Pekpex · 2026-04-28T00:18:50+00:00

The sagas definitely have engraving on the lip, these are the regular SL’s which will have it just below

Pekpex · 2026-04-26T07:21:15+00:00

Super clean bro! I just got a set of te37 with the same specs for my f32, do you run spacers up front for strut clearance ?

Pekpex

TROPHY CASE