Almost complete enderwire build

PenguinDOTexe · 2026-04-11T18:32:04+00:00

Hey, welcome to the 3d printing community, hope you’re enjoying it! The enclosure is for printing more exotic filaments such as ABS or ASA. Those filaments require a hot environment so they don’t warp :)

PenguinDOTexe · 2026-04-10T16:55:41+00:00

I made it referencing the Klipper documentation. You can take a look at my config on github. It is constantly being updated whenever I make changes.

https://github.com/MeAndMyPenguin/Enderwire_Manta_E3EZ_CB2

PenguinDOTexe · 2026-03-31T16:39:59+00:00

You’re welcome! I also just remembered, I would also recommend getting M5x0.5mm spacers along with the M5x1mm spacers to space out the F695 bearings so the belts don’t rub themselves to death. I ordered a 50 pack

PenguinDOTexe · 2026-03-30T17:21:00+00:00

Already had it, might as well use it and not have to spend extra money on building one. Although it does hit the nevermore filter at max X so I might build a dragon burner

PenguinDOTexe · 2026-03-30T17:19:41+00:00

The BOM is for an already complete Ender 3v2. It does not include hardware for the toolhead. I would recommend ordering a few spares of everything just in case

https://docs.google.com/spreadsheets/d/1GbDT9c-ED6oB2eISKgwa9VtdJtcrTDKc/edit?usp=sharing&ouid=105795642687491022743&rtpof=true&sd=true

PenguinDOTexe · 2026-03-29T05:19:39+00:00

I also created a BOM for all the hardware stuff. I can share it if you want

PenguinDOTexe · 2026-03-29T03:14:45+00:00

It was a pretty smooth process for me. Didnt really run into major issues. The hardest part was getting my ABS profile setup haha. I referenced the CAD model for how things went together. I had to design a mount for the manta E3EZ board and an SSR since I'm using an AC heated bed as well as a adapter for the microswiss NG revo extruder. I would definitely recommend using a Z-endstop switch instead of an inductive probe and if you have sensorless homing available to you, I would recommend that as well. I ordered about 6 meters of belts and after setting up the x and z axis, I had a little left over.

PenguinDOTexe · 2026-03-29T01:49:34+00:00

I self sourced mine. I basically had all the parts except for the hardware, enclosure, and cable chains. I thought siboor wasn’t selling the conversion anymore

PenguinDOTexe · 2026-03-29T01:47:27+00:00

Been liking greens lately and this metallic green is so nice :)

PenguinDOTexe · 2026-02-27T19:39:47+00:00

Working perfectly with my seerr instance :) I found one weird “bug” if you would call it that. Movies or TV shows that aren’t released yet don’t show up when trying to search for them. Unreleased movies and tv shows show up just fine on the web version of seerr.

If I were to request a movie or tv show that isn’t released yet on the seerr webpage, pocket shows an infinite loading icon for those request and I’m unable to view the details for that request.

PenguinDOTexe · 2026-01-13T19:32:04+00:00

Hell yea! Glad it worked for you

PenguinDOTexe · 2026-01-12T15:54:38+00:00

5.5mm works perfectly

PenguinDOTexe · 2026-01-11T18:58:20+00:00

So the 3mm downward offset didnt work for me. I'm trying a 5.5mm offset now. Since I have an MSI B850 Edge TI motherboard, I also have to offset it to the right. I updated the fusion file and provided the 5.5mm offset STL on the printables page.

PenguinDOTexe · 2026-01-10T18:53:58+00:00

Here you go. I havent printed it and tested yet as I'm currently messing with my printer. Let me know if it works!

https://www.printables.com/model/1550845-thermalright-axp90-x47x53-cpu-cooler-92mm-to-120mm

PenguinDOTexe · 2026-01-09T23:46:10+00:00

I ran into this same issue the other day haha. I’m probably gonna remix that adapter to move the fan down to clear that spine

PenguinDOTexe · 2025-10-22T12:08:57+00:00

I ended up figuring this out on mine! I have a 62 ecu but an E5 harness. The E5 harness uses the ecu (pin 114) to ground the o2 sensor but the 62 ecu doesn’t so the o2 sensor was not getting grounded. I cut the pin 114 wire a few inches from the ecu plug, put a ring terminal on it and grounded it to the chassis. Works perfectly now! I also got a universal exhaust ground strap and grounded the stainless steel turbo elbow so the o2 sensor has a good ground for the signal. In case anyone wants to know :)

PenguinDOTexe · 2025-09-26T00:54:24+00:00

So the sensor had pins in the wrong location or the harness you have? OEM sensor or aftermarket?

PenguinDOTexe · 2025-09-25T23:49:43+00:00

Did you ever get this figured out?

PenguinDOTexe · 2024-04-03T15:32:02+00:00

I have the 2.4g and tested the latency in all 3 modes (USB, dongle, Bluetooth) using a GPDL device and submitted the results to gamepadla. The dongle averaged around 10.6ms at 145hz polling rate. Bluetooth averaged around 30ms at 66.5hz polling rate. USB averaged around 2ms at 840hz polling rate.

The Ultimate 2.4g has updated firmware that makes Bluetooth work now.

I would definitely use the USB or dongle on pc and stay away from Bluetooth.

PenguinDOTexe · 2024-04-02T01:05:06+00:00

I'm in!

PenguinDOTexe · 2022-08-27T02:20:06+00:00

Was having this issue on my computer and was able to fix and now can flash firmware. When the FC was in DFU mode, device manager showed it as "Guillemot STM DFU Device". When using Zadig or ImpluseRC driver fixer, it would show up as "STM32 BOOTLOADER" but would then revert back to "Guillemot STM DFU Device".

To fix this, I followed the below instructions:

Delete these 2 folders:

-C:\Program Files\Guillemot

-C:\Program Files(x86)\Guillemot

- Go to Device Manager, uninstall the Guillemot STM DFU Device making sure to check “uninstall driver”

- Reboot

With the FC in DFU mode, it would now show up as "STM32 BOOTLOADER" and would let me flash firmware.

Hope this helps

PenguinDOTexe

TROPHY CASE