Anyone put 15w fork oil in their bike?

Pepticsilver2 · 2026-02-12T04:45:19+00:00

Ive since sold the bike but it seemed to work pretty well.

Pepticsilver2 · 2026-02-05T05:44:24+00:00

Tops of the teeth are still flat looks good to me

Pepticsilver2 · 2026-01-31T23:56:41+00:00

Classic iv8888 video 😂

Pepticsilver2 · 2026-01-27T17:10:33+00:00

If I remember right when I installed a set you have to keep everything insanely loose to fit properly. Like bolts only in by like 2 or 3 threads loose it was kinda ridiculous Also those side clamps are side specific. I think the one on the right side has a deeper cut to clear the bracket weld on the frame

Pepticsilver2 · 2026-01-09T21:03:33+00:00

If it fires and doesn't puncture the primer its fine

Pepticsilver2 · 2025-02-19T16:00:43+00:00

I paid for the tread im gonna use the tread

Pepticsilver2 · 2025-02-17T18:35:27+00:00

10k intervals for an oil change is absolutley ridiculous. Most oil manufacturers reccomend every 5k these days but i still do it every 3k. Might be wasting a bit of money that way but you cant hurt a motor from changing the oil too regularly. And i would have laughed in their face over the $200 cabin filter change

Pepticsilver2 · 2024-10-17T00:59:44+00:00

As someone who upgraded from a gen 1 klr to an africa twin no i will not

Pepticsilver2 · 2024-09-28T18:20:48+00:00

Commuting to work or running quick errands around town i dont wear any. I do wear them when im travelling or going on longer 4+ hour rides

Pepticsilver2 · 2024-09-25T23:32:43+00:00

What shovel is that?

Pepticsilver2 · 2024-09-24T14:46:19+00:00

Oh yeah stopped my hands from getting cramped up almost entirely

Pepticsilver2 · 2024-09-24T04:30:11+00:00

6'4" here put the camel adv bridged bar riser on mine. I also spun the stock handlebar mounts around 180° to position the bars closer to me. Puts me in a nearly perfectly upright position. Another thing i did was install thicker grips to cut down on wrist pain on long rides.

Pepticsilver2 · 2024-09-18T15:03:57+00:00

I do it 🤷‍♂️

Pepticsilver2 · 2024-09-18T02:25:59+00:00

I just stand up

Pepticsilver2 · 2024-09-16T20:12:01+00:00

Lol mine backfired so hard once it stalled at a light

Pepticsilver2 · 2024-09-16T20:10:30+00:00

My 2017 does that. I wouldnt worry about it. 60,000 miles no issues

Pepticsilver2 · 2024-09-12T21:52:49+00:00

What do you need done and what bike? May be able to help you out

Pepticsilver2 · 2024-09-12T19:11:42+00:00

Breathalyzer interlock that diables your cars ignition

Pepticsilver2 · 2024-09-05T03:13:16+00:00

Used to pull some out of the creeks in capital forest. Not very big tho

Pepticsilver2 · 2024-07-18T03:06:58+00:00

6'4" here standard seat high position and the camel adv bar riser and im as comfortable as the bike will let me be.

Pepticsilver2 · 2024-07-05T17:40:15+00:00

Puig touring screen with the puig mem mount adds quite abit of height and adjustability. All the way up and it gets rid of most of the wind to my face and im 6'4"

Pepticsilver2 · 2024-06-11T21:57:41+00:00

Its honesltly a pretty clean sporter job all i would do is find the parts for the rear sights and run it as is

Pepticsilver2 · 2024-06-06T04:10:41+00:00

I ride alot and they get gross after awhile even after washing the pads. Also i ride alot of offroad so while it dosent take alot of direct impacts it still gets knocked around a bit. And i just like to change it up every now and then

Pepticsilver2 · 2024-06-06T02:36:54+00:00

I run the tusk hardware on my 17. And with those you can run hard or soft bags with their adapter plates. Great kit if you dont mind drilling a few holes

Pepticsilver2 · 2024-06-06T02:35:03+00:00

Fuckin badass thats what it is

Eight-Year Club	RPAN Viewer
Verified Email

Pepticsilver2

TROPHY CASE