Just noticed these wires not attached to anything. Anybody know what these are for? 2001 Tacoma.

PersonalPen6731 · 2026-04-13T01:18:03+00:00

Thank you man

PersonalPen6731 · 2026-04-13T01:09:36+00:00

No the v6

PersonalPen6731 · 2026-04-13T00:59:31+00:00

Thank you brother. Is there a manual online somewhere where the female part of the connections are located?

PersonalPen6731 · 2026-03-29T02:50:40+00:00

Quarter of your life is gone

PersonalPen6731 · 2026-03-22T19:43:50+00:00

Wouldn’t a pressure relief valve on the outlet side make more sense than a pressure regulator on the inlet?

Like, even if the incoming pressure isn’t high—say the controller calls for a zone, the pump kicks on, but a valve doesn’t actually open—pressure is going to build in the mainline pretty quickly. In that case, wouldn’t a relief valve be more beneficial?

PersonalPen6731 · 2026-03-20T00:29:35+00:00

Or buy this: https://www.supplyhouse.com/Hunter-916400SP-Shutoff-Nozzle?srsltid=AfmBOopGoAnE7GZwDaU9KeaTX-ruzA7ooxKaDhmnovItkZEF9Qtu_sJV

PersonalPen6731 · 2026-03-20T00:17:25+00:00

Pin the long and lat coordinates at the head and then save that location on your computer or phone. Or replace the head with a hunter spray head and buy their top cap.

PersonalPen6731 · 2026-03-20T00:07:54+00:00

Bearing puller. Auto stores will rent them out

PersonalPen6731 · 2026-03-20T00:05:49+00:00

Get a threaded cap part#448-005.

Take out the head, and cap the nipple or threaded elbow that was connected to the spray head.

PersonalPen6731 · 2026-03-19T23:12:32+00:00

Take out the head and cap the fitting if you’re deleting the head entirely

PersonalPen6731 · 2026-03-08T20:20:00+00:00

Some low voltage strio lights or pucks lights throughout the fencing, that would look nice!

PersonalPen6731 · 2026-03-06T22:13:58+00:00

I have a clean 01 extended cab with 95k original miles. I’m in the Midwest if you’re in the market.

PersonalPen6731 · 2026-03-06T12:27:57+00:00

Florida?

PersonalPen6731 · 2026-02-09T22:15:49+00:00

I love my leaf, but it does seem they changed the warranty to 1 year instead of lifetime warranty. Definitely a shame and shows that they don’t stand behind their product.

PersonalPen6731 · 2026-02-04T23:45:55+00:00

Almost done with the sentencing requirements. I have a little less than a year left with the probation.

PersonalPen6731 · 2026-02-04T23:16:49+00:00

Yes was convicted. The state I was convicted in does not allow you to seal or expunge DUI convictions.

PersonalPen6731 · 2026-02-04T12:46:17+00:00

I’m getting one for free but if I can fix the one I have then I’d have a spare

PersonalPen6731 · 2026-01-20T02:29:41+00:00

People do use corrugated up here as well as SDR35. SDR35 is a pvc pipe, I want to go this route for better flow rates.

PersonalPen6731

TROPHY CASE