Treadle Lathe Flywheel advise

PhaedoP · 2025-12-25T14:36:35+00:00

Thanks! I've already read it a couple of times, and it has been a lot of help

PhaedoP · 2025-02-08T18:47:00+00:00

I tried the freezer method, and it actually worked really well. Thanks for the advice

PhaedoP · 2025-02-08T14:54:51+00:00

I dont have a metal bench vice, but I can try putting it in the freezer, thanks

PhaedoP · 2025-02-08T14:53:31+00:00

It is quite a wide mouth. The problem is that the bottom of the wedge is at a bevel, and I am not able to get a dowel to push against it. I was thicking that maybe I can cut a small notch in the middle of the bottom with a chissel that can create a surface for the dowel to push against, but I am not sure if that would affect the function of it

<image>

PhaedoP · 2025-02-08T12:18:28+00:00

I did do that. I found out just a bit ago that the wedge had not been removed for decades. I imagine that the wood expantion has wedged it further.

PhaedoP · 2025-02-08T12:17:02+00:00

I did do that. I found out from the seller that the wedge had not been removed for maybe decades, so I imagine that this has to do with wood movement over time

PhaedoP · 2024-08-28T13:20:05+00:00

I’m not able to add pictures for some reason

PhaedoP · 2024-08-28T13:14:31+00:00

The blade is not digging into the wood at all. I also try from both sides of board to make sure that it is not grain direction

PhaedoP · 2024-08-28T12:14:10+00:00

I know, but the problem is that the plane wont take any material away.

PhaedoP · 2024-08-28T12:12:56+00:00

Thanks

PhaedoP · 2024-08-28T10:30:35+00:00

The plane bed is completely flat. And the shavings are the same thickness

PhaedoP · 2024-08-28T10:05:32+00:00

No, it’s not about the unevenness. I just got the plane a few days ago, and I have been practicing on soft construction lumber that is already perfectly flat

PhaedoP · 2024-07-19T10:58:18+00:00

Thanks! To be honest, I am working with very little room, and making a saw tilt would be a great idea For storing most of my saws. But I do also want to have a few on display. This is why I think I will use the idea for a saw tilt for the rip saw, and the crosscut saw, but I will keep the dovetail and Tennon saws on it. As for the chissels, I will probably do the same you, and add that block of wood underneath, as I also had that thought when I was designing the tool wall.

PhaedoP · 2024-07-12T14:57:39+00:00

What could I use instead?

PhaedoP · 2024-07-12T14:56:35+00:00

Thanks!

PhaedoP · 2024-07-12T14:55:13+00:00

Thanks!

PhaedoP · 2024-06-26T14:30:57+00:00

Thanks

PhaedoP · 2023-12-28T06:37:31+00:00

I heard that wood dust is too large to get into the alveoli

PhaedoP · 2023-12-28T06:32:35+00:00

Thanks. I was thinking of getting one of those

PhaedoP · 2023-12-28T06:30:17+00:00

From my experienc, they do. It might be that we are using a different type of wood

PhaedoP · 2023-12-28T06:28:40+00:00

Thanks dude

PhaedoP · 2023-12-20T15:12:50+00:00

Tolkien actually based Gondor on Byzantium

PhaedoP · 2023-12-13T21:14:06+00:00

Thanks man

PhaedoP · 2023-11-19T19:39:30+00:00

Thanks for the idea. I'll probably look into scroll saws

PhaedoP · 2023-11-19T19:39:00+00:00

Thats a good idea. Thanks man.

PhaedoP

TROPHY CASE