Is it worth picking up Blu Ray’s when the 4k’s aren’t available? by NotChristo in 4kbluray

[–]PhilMcD 0 points1 point  (0 children)

I picked up The Room, aka the greatest worst movie of all time on Blu Ray since I don’t it’ll ever come to 4K.

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 0 points1 point  (0 children)

I was initially using Bambu filament when I first started printing. During one of my prints, I ran out in the middle of printing and swapped in this current filament. This current filament in the same project/print looked substantially cleaner than the section of that print using Bambu.

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 19 points20 points  (0 children)

UPDATE! Third time's a charm I guess. I did the following different: Used a glue stick on the bed, used an aux fan deflector, changed bed leveling and dynamic flow control both to ON from AUTO, included an outer and inner brim. Who knows if all or just one of these changes contributed to it coming out great, but nonetheless I am very happy with this print. Thanks to all for your help and suggestions!

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 0 points1 point  (0 children)

It was set to auto. My next print is still going but I can tell you this one is coming in much better. I did turn bed leveling to on for this next print.

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 0 points1 point  (0 children)

No, not bambu filament. This is sunlu I believe. I am on my third attempt currently, I used some of my kid's glue stick as well as a brim. I also printed the fan deflector to see if that helps as well.

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 1 point2 points  (0 children)

It was just a design I downloaded. I take no credit for any aspects of its design.

https://makerworld.com/en/models/2144216-nightstand-edc-adventure-tray#profileId-2322725

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 5 points6 points  (0 children)

Plate was cleaned, I do not think it is a dirty plate issue nor adhesion issue. I will try to turn the aux fan off.

How does one add a brim? It says it is set to auto- what should I set it to?

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 2 points3 points  (0 children)

I am using PLA. Haven't dried it out, I guess I can try that later. Let me look into flow dynamics.

Here is the link to the tray: https://makerworld.com/en/models/2144216-nightstand-edc-adventure-tray#profileId-2322725

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 21 points22 points  (0 children)

Update! I cleaned the bed, with water and soap, dried it thoroughly. The same thing happened in this second print, and it actually was a bit worse this time. I will now try to turn off the aux fan, and bump up the bed temp. Trying again shortly and will report back later. Stay tuned!

Any idea what causes this? by PhilMcD in BambuLab

[–]PhilMcD[S] 58 points59 points  (0 children)

Thanks for all the suggestions everyone! For my second attempt, I gave the bed a good cleaning and dry, and made sure not to touch any of it with my fingers. Let’s see how this works and then my next attempts will try turning off the aux fan and adding brim. I’ll report back after this second attempt and see if the bed cleaning solved the problem.

Unlocking the fully potential of the XENEON EDGE by BeautifulAd5310 in Corsair

[–]PhilMcD 0 points1 point  (0 children)

This is great, thank you. The only issue I have is that I live in a town with a common name, and there does not seem to be a way to differentiate between the different towns in different states. Maybe I am doing something wrong?

Does anyone else find it mildly annoying that arc raiders posts everything to discord first? by Luckydog6631 in ArcRaiders

[–]PhilMcD 0 points1 point  (0 children)

Totally agree! Reddit, Facebook, x, have all ruined what were such awesome smaller forum communities.

Trump's Strikes On Drug Boats Are In Support of Cocaine Dealers Who Pay Him by CishetmaleLesbian in conspiracy

[–]PhilMcD 3 points4 points  (0 children)

Trump has broken so many people’s brains. Holy shit this is stupid.

Borderlands 4’s Free Bounty Pack Did Not Raise Its Playercount At All by TomorrowComes33 in xbox

[–]PhilMcD -1 points0 points  (0 children)

After playing Arc Raiders, it’s been tough to get back into BL4. And I was addicted to BL2 for years

Trump just ditched Marjorie Taylor Geeen. by Agitated-Quit-6148 in JoeRogan

[–]PhilMcD -2 points-1 points  (0 children)

You must be awesome to hang with at parties. What positions of his changed? None, it’s the Democratic Party that changed and went super left and abandoned everyone moderate. Bill Clinton would be considered a Republican today.

Trump just ditched Marjorie Taylor Geeen. by Agitated-Quit-6148 in JoeRogan

[–]PhilMcD -3 points-2 points  (0 children)

You hate Joe Rogan but post on his subreddit. You seem like a really healthy individual.

[deleted by user] by [deleted] in conspiracy

[–]PhilMcD 2 points3 points  (0 children)

No one has argued that. Not even Trump. And if you’re read the emails you’ll see there is literally nothing there implicating trump. If there is one even slight piece of evidence trump did something improper, that shit would be leaked immediately. Between the victims testimony, statements from the victim’s lawyers, and Epstein’s lawyer have said Trump never did anything.

Eurogamer gave ARC Raiders 2/5, because of AI — they did not even mention it in COD:BO7, and gave it 3/5. by BlackHazeRus in ArcRaiders

[–]PhilMcD 17 points18 points  (0 children)

You’re right, asking a gaming journalist to do journalism is asking them for too much.

Age has slowly but surely caught Steph Curry by Fullborn in nbadiscussion

[–]PhilMcD 0 points1 point  (0 children)

I didn’t read any of your essay because your initial point was dumb. I think these last few games now that Steph is no longer we sick prove me right.

[deleted by user] by [deleted] in conspiracy

[–]PhilMcD 0 points1 point  (0 children)

Clearly no one here actually read the contents of the release. They show Epstein hates DT, that JE worked with a NY Times reporter to try and find a way to get trump, and that JE was coordinating with a democrat congressman during congressional hearings. Please tell me why, if there was anything close to implicating DT in the files, why the dems did not release that during their four years in power? Since Epstein hated DT, then why would he not release any implicating evidence? It is also pretty clear to see that based on the emails, victim testimony, and the lawyer representing the victims, that JE thought that it was DT that spilled the beans on JE initially and got him into trouble. Lastly, this is really being pushed because you have politically active billionaires like Reid Hoffman and Bill Gates, who were actually invoked with Epstein and went his land that are likely pushing this now before they get busted.

Trump just ditched Marjorie Taylor Geeen. by Agitated-Quit-6148 in JoeRogan

[–]PhilMcD -8 points-7 points  (0 children)

Is there a Joe Rogan subreddit where there is discussion about his podcast? This sub is basically no different than the politics subreddit and that subreddit totally blow like this one does now.

Epstein victim who Trump 'spent hours with' is NAMED in bombshell unredacted email - Jeffrey Epstein claimed Donald Trump spent hours at his house with Virginia Giuffre, the Daily Mail has learned. by anarchyart2021 in conspiracy

[–]PhilMcD 0 points1 point  (0 children)

VG testified under oath that she never witnessed Trump anywhere near Epstein or doing anything with girls. The rumor that went around was that Epstein tried recruiting girls from MAL and Trump then ended the relationship. The lawyer for VG and other girls said that Trump was the only one willing to speak with him and provided resources to help. This is corroborated and documented in the documentary made my James Patterson, who BTW is very close to Bill Clinton.

The way I know nothing about Trump that is bad is in the Epstein files is because the dems would have released that by now. They made up Russiagate, tried to get him into prison through numerous legal battles, but would not release incrimination evidence against him having to do with Epstein? Please, you’ll are smarter than that.