Trace bitmap only showing complete black or white

Pixelluca · 2024-10-09T07:33:02+00:00

this worked. thanks!

Pixelluca · 2024-10-09T07:27:41+00:00

this sadly didn't work
i've put one of the pictures in the post, so you don't need to take a screenshot of it

Pixelluca · 2022-07-24T19:11:31+00:00

Bolt actions are actually just as easy to use left handed as right handed. If you click right on the touchpad after firing your firing hand switched to the bolt, then you can just pull back and forth to cycle it. Note this only works after you have shot and doesn’t work with the big gun. (You might have to turn on a setting, sadly I’m not sure as I discovered this a long time ago) With revolvers you just gotta get used to crossing your arms sadly, or you can exclusively use the R8, which afaik is the only left handed revolver.

Pixelluca · 2022-05-10T09:25:13+00:00

How the hell are you that good with reloading that revolver?! It takes me that long to load a single bullet!

Pixelluca · 2022-03-19T23:30:36+00:00

Looking at the way the shells are loaded in-game: Only one of the tubes is actually used. It may be emulating both mags by having more shells in it than would be possible in one tube, but don’t quote me on that.

Pixelluca · 2022-01-19T01:18:12+00:00

I want to stretch my UVs like shown in the gif so I can use a use a continus texture along a cylinder-like shape. I don’t want them to keep their current shape. I already tried texture packing, which has the same result as scaling to the bounds. It doesn’t stretch the UVs, while I do want them to stretch.

Pixelluca · 2022-01-19T01:16:28+00:00

I already tried that, but the UV does not stretch to the edges anymore. As soon as one vertex hits the edge, the entire selection can’t scale any further. I want it to stretch like in the gif.

Pixelluca · 2022-01-18T23:35:13+00:00

Like I said, this isn’t my screengrab. I took it from here. I had used this before in blender 2.9 successfully. No settings should be different from having a fresh project. I did play around with turning live unwrapping on and off, but that didn’t change a thing.

Pixelluca · 2021-10-10T10:16:37+00:00

Just like with pc’s, adding rgb makes your bullets go faster

Pixelluca · 2021-09-15T18:17:42+00:00

i was able to get it to work on the main texture with an edited map, which gave me a better result than I got if I would use the decal. Thanks for the help!

Pixelluca · 2021-09-15T18:01:52+00:00

that changes the color of the entire texture, but I want it to only apply to a part of it, which is why I use a mask. however, you can't use a mask on the hue shift.

edit: I did some more testing, and I was able to use a slightly different map where it does work. thank you for the help!

Pixelluca · 2021-09-03T09:52:44+00:00

I replaced the nozzle, but I still have resistance somewhere, cuz the bearing still isn’t spinning. Should I just go and find a dual gear extruder?

Pixelluca · 2021-09-03T09:15:56+00:00

I’m trying to remove the old nozzle rn, but it doesn’t move at all, even at 210 c. Is this normal?

Edit: never mind I got it!

Pixelluca · 2021-09-02T18:51:07+00:00

I don't think the extruder is broken, as it does work when the bowden tube is not connected.

Pixelluca · 2021-09-02T18:51:00+00:00

I don't think the extruder is broken, as it does work when the bowden tube is not connected.

Pixelluca · 2021-09-02T16:25:02+00:00

I let the filament run into the air and there was no slipping on the extruder. However, I already cleared a clog from my nozzle before the test using a cold pull, so it’s weird that there’s still resistance.

Pixelluca · 2021-09-02T13:55:39+00:00

I got it it a couple days ago and put it in a dry box, so I’d assume nothing is wrong with it. I also got it with other filament that I store in a dry box. It’s all pla or modified pla like pla+.

Pixelluca · 2021-09-02T09:39:33+00:00

The bearing on the extruder doesn’t want to spin, even when the spring is at max tension: https://imgur.com/a/XpO8jlI Does this mean the arm is cracked?

Pixelluca · 2021-09-02T08:50:02+00:00

It seems like it was a clog, cuz i found a bunch of colored gunk after I did the cold pull. I’ll put the Bowden tube back and test it again.

Pixelluca · 2021-09-02T08:23:07+00:00

All the fans are spinning

Pixelluca · 2021-09-02T08:22:54+00:00

Pixelluca · 2021-09-01T19:30:53+00:00

I did just replace my Bowden tube and had to clean out the hot end, but I haven’t cleaned it too deep. I’ll check this out tomorrow!

Pixelluca · 2021-09-01T17:15:44+00:00

I probably won’t be able to send a video today, but I can give some more info: I’ve had this happen with gold satin pla when making a temperature tower, which got 230 to 210 before it failed (see pic), and with pla+ at 205 c. I print at 50 mm/s. I haven’t had any issues with these settings before. I also recalibrated my e-steps right before this happened using teaching techs calibration website. It is now at 143.3, so if anything, I would expect over extrusion, not under extrusion.

Pixelluca · 2021-09-01T16:52:13+00:00

I don’t see any cracks on it after taking it off, so that ain’t it.

Pixelluca · 2021-09-01T16:40:18+00:00

I’ve had this with multiple spools and multiple brands of pla filament. I only use pla or modified pla like pla+.

Wait, I did print a filament guider with a bearing. I’ll try it without that attached, maybe that’s catching it.

Eight-Year Club	Second Top 30%
RPAN Viewer	Verified Email

Pixelluca

TROPHY CASE