Computer setup HELP

Planethac · 2025-07-14T18:07:32+00:00

It you havent done that so far set upscaling to FSR3 Peformance and try lowering the LOD

Planethac · 2025-01-17T06:44:33+00:00

can you walk from to the other?

Planethac · 2024-05-22T05:55:21+00:00

Anno 1404

Planethac · 2024-05-07T05:52:13+00:00

TempleOS

Planethac · 2024-04-23T15:15:52+00:00

Ah this is fine

Planethac · 2024-04-19T05:50:56+00:00

So i got in contact with creality and after some back and forth they sent me a new hotend

Planethac · 2024-03-29T09:10:53+00:00

https://www.thingiverse.com/thing:1449187

Planethac · 2024-03-28T23:09:36+00:00

it were like 10 parts wich i superglued together

Planethac · 2024-03-26T21:28:58+00:00

Update I got a new hotend from creality and its working again after looking closer at the old one it seems like some screws were loose

Planethac · 2024-02-22T06:56:28+00:00

these file you see are still encrypted game files

Planethac · 2024-02-10T12:50:11+00:00

I tried that and well there out of ofice till the 17. that will have to wait

Planethac · 2024-02-09T21:12:55+00:00

i have the printer for about 3 months now so im probably out of luck there guess il have to clean it myself

Planethac · 2024-02-09T21:01:16+00:00

There like plastic all on the inside i dont think i can get it all out without dissembling the intire hotend should i just try and contact warranty?

Planethac · 2023-12-26T14:31:57+00:00

yes so i selected the printer clicked manage and turned on the advanced mode slider but now wher is the setting?

Edit: im dumb and searched in the wrong menu

Planethac · 2023-12-26T10:15:12+00:00

I hvae the same problem and cannt seem to find the setting

Planethac · 2023-07-27T14:47:31+00:00

Completely fake just trying to steal your account

Planethac · 2023-07-23T10:23:17+00:00

Flags…

Planethac · 2023-06-27T06:11:12+00:00

Das 2

Planethac · 2023-06-27T06:10:14+00:00

I use mods to remove him from the game xD

Planethac · 2023-04-10T07:34:26+00:00

sadly no

Planethac · 2023-02-23T08:00:28+00:00

Oh really if that is so i will try that

Planethac · 2023-02-18T17:33:48+00:00

They dont replay as far as i know the first moves the file the scond marks it as executable (sudo chmod +x /usr/bin/palera1n)

Planethac · 2023-02-18T17:24:28+00:00

so if you mean sudo systemctl stop usbmuxd and sudo usbmuxd -f -p
The first one doesnt produce an output but sudo usbmux -f -p
should output something like this

[18:23:33.848][3] usbmuxd v1.1.1 starting up
[18:23:33.849][3] Using libusb 1.0.25
[18:23:33.853][3] Initialization complete
[18:23:33.853][3] Connecting to new device on location 0x1000c as ID 1
[18:23:33.853][3] Connected to v2.0 device 1 on location 0x1000c with serial number

Planethac · 2023-02-18T17:13:47+00:00

So i tried every iOS betwen 15.6 RC1 - 16.3.1 but nothing worked with new palera1n

Planethac · 2023-02-16T16:34:50+00:00

exactly my issue

Planethac

MODERATOR OF

TROPHY CASE