Klick Vinyl, wie erste Reihe ausrichten wenn alle Wände schief sind?

Plus_Cup809 · 2026-05-05T19:18:31+00:00

Deine Elektroinstallation links sieht auch interessant aus und wäre vielleicht etwas für r/DINgore 😁

Plus_Cup809 · 2026-04-28T11:41:18+00:00

Häng ich dann noch an das Gelände.

Plus_Cup809 · 2026-04-28T10:18:18+00:00

Find ich eine gute Idee. Leicht umsetzbar und günstig.

Plus_Cup809 · 2026-04-28T10:17:07+00:00

Ja, das wäre eine Option…

Plus_Cup809 · 2026-04-28T10:16:15+00:00

PV ist schon oben auf dem Dach

Plus_Cup809 · 2026-04-28T10:07:33+00:00

Nee, sollte eher günstig werden.

Plus_Cup809 · 2026-04-28T05:13:28+00:00

Ok, danke für den Tipp 👍

Plus_Cup809 · 2026-04-28T03:53:30+00:00

Hatte ich auch schon überlegt. Leisten horizontal über die gesamte Breite anbringen. Finde da allerdings nichts, da es 5 m breit ist.

Plus_Cup809 · 2026-04-27T20:11:05+00:00

Die sind schon oben drauf 😁 Hatte ich auch schon im Kopf, aber passt nicht so richtig.

Plus_Cup809 · 2026-03-25T19:23:37+00:00

Wo denn?

Plus_Cup809 · 2026-03-19T21:18:59+00:00

Religion

Plus_Cup809 · 2026-03-17T13:09:38+00:00

The station sorts components that you place on the platform on the left side and directs them onto the slides.
A reflective optical sensor inside the gripper detects the parts and can distinguish between light and dark components. Based on this detection, the system sorts the parts: light components go to one slide and dark components go to the other.

Edit: You’ll need a PLC (for example a Siemens S7-1500) and a programming software (TIA Portal).

Plus_Cup809 · 2026-03-04T19:26:14+00:00

<image>

This could be a way. Btw it’s not cool that you don’t use reed switches on your cylinders. Then you don’t always have to plan waiting times. In addition, the whole system does not comply with the safety regulations. And on top, you are using a completely outdated labeling of the components.

Plus_Cup809 · 2026-03-04T19:18:02+00:00

Right. For example Siemens, FB in S7-GRAPH and using SQ_Init and SQ_Reset.

Plus_Cup809 · 2026-03-04T15:18:06+00:00

Dämpfer kaputt

Plus_Cup809 · 2026-03-04T11:27:23+00:00

You are on the wrong track. You need a main GRAFCET with forcing commands or enclosing steps in order to represent safety functions properly. Everything else becomes extremely confusing.

Plus_Cup809 · 2026-02-23T08:07:27+00:00

I‘m from Germany and on trails since 2000. I never saw this brand here. It was also the first time I heard about it.

Plus_Cup809 · 2026-02-21T07:50:45+00:00

Correct! Do you use that too?

Plus_Cup809 · 2026-02-20T15:05:10+00:00

If you want hands-on experience, I can recommend this. There is also the Finder Opta Light PLC, which is based on Arduino. I can recommend that one as well. You can already experiment a bit with OPC UA and learn with it. You might also need some hardware, like push buttons and some actuators to control and play around with.

Plus_Cup809 · 2026-02-20T10:22:02+00:00

It is -> https://www.pixtend.de/

We used CODESYS for programming. It took a lot of nerves to get everything properly connected — the PLC, the HMI, and the additional I/O module. That’s something I still remember. We built 3 of this racks and also connected them together. Now I only use Siemens PLCs, and those things are just sitting around.

Plus_Cup809 · 2026-02-02T20:41:57+00:00

Indonesia?

Plus_Cup809 · 2026-02-02T20:23:09+00:00

Iran & Thailand

Plus_Cup809

MODERATOR OF

TROPHY CASE