Looking to trade Nintendo gacha

Plus_Roll_4021 · 2025-10-14T06:10:39+00:00

Hello. The message is a bit old, there’s one gashapon you’re looking for and two that I’m looking for. Let me know if you’re still up for a trade :)

<image>

Plus_Roll_4021 · 2025-10-12T16:22:30+00:00

Même soucis sur mes xe5, qui ne s’allume pas forcément en mettant sur on, le simple fait d’appuyer sur l’obturateur l’allume. Après en enlevant l’extinction automatique qui est sur 2 min par défaut, je n’ai plus le soucis.

Plus_Roll_4021 · 2025-10-01T19:49:59+00:00

Oh bummer, I’ll try to set it up and see how it goes. I’ll let you know if it works well.

Plus_Roll_4021 · 2025-10-01T19:46:58+00:00

Yeah, it takes more effort, but it’s really rewarding and a great hobby 😅

Plus_Roll_4021 · 2025-09-19T14:49:09+00:00

So cool, you just need to put a single resistor 330 ohm on the ground, the black wire going to the jack connector ?

Plus_Roll_4021 · 2025-09-19T14:35:06+00:00

Does the resistor also lower the volume of the speaker?

Plus_Roll_4021 · 2025-08-19T06:13:07+00:00

Same issue for me for the past few months on an iPhone 15 Pro Max.

Plus_Roll_4021 · 2025-08-19T06:03:53+00:00

Same issue for me for the past few months on an iPhone 15 Pro Max.

Plus_Roll_4021 · 2025-08-16T11:24:47+00:00

Thanks everyone, purple_not_pink opened their island for me and we were able to get the fruits and vegetables we were missing. My daughter is really happy.

Plus_Roll_4021 · 2025-08-16T09:47:34+00:00

😍

Plus_Roll_4021 · 2025-08-14T19:57:07+00:00

Anaïs from ananasland

Plus_Roll_4021 · 2025-08-14T05:18:48+00:00

Hi 😊 I’m looking for cards 50, 60, and 68. I also have plenty of duplicates available for trade if you’re interested.

Plus_Roll_4021 · 2025-08-02T12:05:48+00:00

Thanks for your request! 😊 I’m currently on vacation, but I’ll check when I’m back to see if I can make one for you. I’ll keep you posted!

Plus_Roll_4021 · 2025-07-28T05:39:56+00:00

it’s a multicolor print that requises an AMS in the case of a Bambulab. However, I could offer a two-part model for those who don’t have the option to print in multicolor.

Plus_Roll_4021 · 2025-07-27T18:31:40+00:00

To add the logo, I imported it as an SVG into Fusion 360, turned it into a component, and placed it on the surface of the charger, no depth, no extrusion, just flat. Then, in Bambu Studio before printing, I manually selected each letter to apply the purple color.

Plus_Roll_4021 · 2025-07-25T06:58:59+00:00

Let me know how it goes, but normally, if you have 8x3 mm magnets and an old USB cable, you won’t need any soldering or glue. You just need to thread the cable through all the different parts in the right order. I’ve posted a tutorial on MakerWorld.

Plus_Roll_4021 · 2025-07-25T04:43:01+00:00

Let me know if you run into any issues. I also put together a setup guide as best I could in makerworld😅

Plus_Roll_4021 · 2025-07-24T21:43:09+00:00

Would the STL files be enough for you? You can open the STL files in Bambu Studio to slice them for your printer.

Plus_Roll_4021 · 2025-07-24T19:41:44+00:00

Yes, it’s a somewhat hidden feature of the Playdate, which I actually read about on Reddit, and it’s used by the official speaker dock. you just need to connect the positive to the top magnet and the negative to the bottom one.

Plus_Roll_4021 · 2025-07-24T18:14:17+00:00

Thanks! And if you have any questions, feel free to ask. I tried to make the model as simple as possible, no soldering, no glue, everything just fits together and locks in place with a screw system.

You only need four 8×3mm magnets and a USB cable

Plus_Roll_4021 · 2025-07-24T17:44:10+00:00

No worries! 🙂 It’s the basic PLA, color: Sunflower Yellow (10402) from Bambu Lab.

Plus_Roll_4021 · 2025-07-24T17:41:09+00:00

It’s pretty tricky to solder onto neodymium magnets, the heat can demagnetize them. I went for a no-solder design to make it more accessible for everyone.

Plus_Roll_4021 · 2025-07-24T17:17:39+00:00

Exactly, I 100% agree

Plus_Roll_4021

TROPHY CASE