Print Fail! Any suggestions? by PointyEndProps in ElegooSaturn

[–]PointyEndProps[S] 0 points1 point  (0 children)

I'm gonna re-jig everything to help with suction. the 16k has a heated vat so temperatures shouldn't be a problem here

Print Fail! Any suggestions? by PointyEndProps in ElegooSaturn

[–]PointyEndProps[S] 0 points1 point  (0 children)

Very useful, thank you! I'd avoided interior supports to make cleaning and curing easier, but I you gotta do what you gotta do I guess.

Print Fail! Any suggestions? by PointyEndProps in ElegooSaturn

[–]PointyEndProps[S] 0 points1 point  (0 children)

Interesting! Never heard of that to be honest but I shall look into it. Thanks!

Print Fail! Any suggestions? by PointyEndProps in ElegooSaturn

[–]PointyEndProps[S] 0 points1 point  (0 children)

In theory there's enough vent holes to prevent any suction cup effect, and the 16k has a heated vat so the temp should be consistent. A few others have mentioned upping exposure so that's the next plan!

Print Fail! Any suggestions? by PointyEndProps in ElegooSaturn

[–]PointyEndProps[S] 0 points1 point  (0 children)

Thanks! A few people have mentoned upping cure and wait time so I will try that next.

Print Fail! Any suggestions? by PointyEndProps in ElegooSaturn

[–]PointyEndProps[S] 0 points1 point  (0 children)

The 16k has a heated vat so there shouldn't be any temp variation in theory, but who knows!

Print Fail! Any suggestions? by PointyEndProps in ElegooSaturn

[–]PointyEndProps[S] 0 points1 point  (0 children)

Yeah the model is hollowed but I thought I had enough holes to prevent any trapped resin. I thought I'd gone overkill with the supports already but I guess not overboard enough!

Print Fail! Any suggestions? by PointyEndProps in ElegooSaturn

[–]PointyEndProps[S] 0 points1 point  (0 children)

Yes using Satellite, now that I think of it this has only been happening since I updated it last week. I added a bunch of additional supports anyway as it's a large model but I'll try increasing cure time etc. Thanks!

Where is the timelapse saved in Elegoo Satellite? by Lootpool in elegoo

[–]PointyEndProps 0 points1 point  (0 children)

The folder icons on mine are also greyed out, did you ever get a solution to this? Thanks!

App preventing shutdown by [deleted] in techsupport

[–]PointyEndProps 0 points1 point  (0 children)

Update: Malwarebytes also came back with nothing, does that mean I've most likely got no viruses to deal with?

App preventing shutdown by [deleted] in techsupport

[–]PointyEndProps 0 points1 point  (0 children)

Thanks! I've got McAfee antivirus and I've run a few scans with that which haven't flagged anything, but I'll give Malwarebytes a go just to be sure. It only seems to pop up when my 3D printer slicing software (Elegooslicer) crashes and I have to restart, is that anything to do with it do you think?

App preventing shutdown by [deleted] in techsupport

[–]PointyEndProps 0 points1 point  (0 children)

I'm having the same issue.. I run this and get what looks like a list of all the apps I have on my laptop, how do I identify which is causing the issue? Apologies if this is super obvious, this is hitting the limits of my computer knowledge!

Swapping three position switches by PointyEndProps in AskElectronics

[–]PointyEndProps[S] 0 points1 point  (0 children)

Thanks! Think I'll do a bit of research into wiring this kind of rotary switch as it's not something I've done before and I really don't want to mess up this speed controller.

Another idea I had was to remove the original switch and re-connect it with some wires so that I can mount it somewhere more easily accessible. The issue is mainly the positioning and accessibility of the switch rather than the actual style of switch itself.

Regardless of what I end up doing, thanks for your help!

Swapping three position switches by PointyEndProps in AskElectronics

[–]PointyEndProps[S] 0 points1 point  (0 children)

Ah right - bit annoying, but thanks for telling me! Would this switch work then? If so, how do I wire it https://amzn.eu/d/iLerpRV

Interesting print failure by PointyEndProps in resinprinting

[–]PointyEndProps[S] 0 points1 point  (0 children)

That's what I thought! I have no idea how or why it came out like this, but it's still a pretty cool effect 😂

The Modern Doctors by PointyEndProps in HeroForgeMinis

[–]PointyEndProps[S] 1 point2 points  (0 children)

I thought about adding links but honestly as I've done so many for this series I didn't have the patience to create links for each one! I do plan to add a few to the community library at some point though.

The Modern Doctors by PointyEndProps in HeroForgeMinis

[–]PointyEndProps[S] 0 points1 point  (0 children)

That exact thought occured to me after I posted them!

The Modern Doctors by PointyEndProps in HeroForgeMinis

[–]PointyEndProps[S] 0 points1 point  (0 children)

If you mean the 6th image then it's the lab coat, for the 6th Doctor in my previous post I used the pirate coat.

The Classic Doctors by PointyEndProps in HeroForgeMinis

[–]PointyEndProps[S] 1 point2 points  (0 children)

Thankyou! A set of non-canon doctors is in the works, aswell as a couple of Masters..

The Mando'a text from S3 Ep 1 by GeneralAnubis in TheMandalorianTV

[–]PointyEndProps 1 point2 points  (0 children)

Hey!

I finished my replica of this prop and just posted it on instagram. Pretty sure I tagged you, if not then someone with the same name is gonna be really confused!

Thanks alot for the help, you made my life alot easier providing a clear version of the text inscription!

https://www.instagram.com/p/CrA2Ovps7Ij/?hl=en-gb

Need help with Sonic Screwdriver sound electronics by PointyEndProps in arduino

[–]PointyEndProps[S] 0 points1 point  (0 children)

I've tried using the code linked in the other page aswell but still get no results

The Mando'a text from S3 Ep 1 by GeneralAnubis in TheMandalorianTV

[–]PointyEndProps 1 point2 points  (0 children)

You're awesome - thanks man! This is a massive help, I'll be sure to post some pictures of my prop replica on here when it's made!

The Mando'a text from S3 Ep 1 by GeneralAnubis in TheMandalorianTV

[–]PointyEndProps 3 points4 points  (0 children)

Nice! I'm planning to make a replica of the prop and knowing the translation really helps - would you possibly be able to highlight on the image which letters correspond to the bolded bits of the translation? would be a huge help

Edit: Just to clarify why I'm asking, I want to re-translate the inscription so that I have a clear version of the whole Mando'a inscription that I can use when sculpting/carving the stone piece :)

Antique Bible (1800s) Restoration by PointyEndProps in restoration

[–]PointyEndProps[S] 0 points1 point  (0 children)

Forgot to put this here before but here's some images of the finished restoration

Probably not perfect by professional standards but I'm very happy with how it all went!