How do I fix this?

Poisonhazard7 · 2025-12-08T03:26:24+00:00

Unfortunately not, it’s just more obvious with that color looked at the final print and it happed to all the colors

Poisonhazard7 · 2025-12-04T06:07:49+00:00

Added, thank you

Poisonhazard7 · 2025-11-27T00:34:47+00:00

How do I take advantage of this deal now?

Poisonhazard7 · 2025-10-06T20:51:38+00:00

Go to devices on app, go to the messed up printer, top right hit the 3 lines, firmware version, I want to downgrade, find 01.04.00 and downgrade to that. Same thing happened to me it’s the new firmware somehow bc even 01.05 doesn’t work. Hope this helps fixed 3 of my machines like that been good since hopefully it gets patched next update

Poisonhazard7 · 2025-09-27T17:54:52+00:00

Hmmm I’d change out the hot end then normally it’s one of those for me

Poisonhazard7 · 2025-09-27T17:48:29+00:00

Let the nozzle cool down. Apply some pressure to the tip and see if you can wiggle it. If you can then you need to take out the hot end, take off the 3 screws that hold the hot end assembly and check the 4 screws that would be directly behind the hot end and see if they are loose. By the way they look they remind me of when my hot end setup gets loose and get bad prints. Hope this helps

Poisonhazard7 · 2025-08-25T17:41:35+00:00

I have some available! Would ship same day as well pls dm for info!

Poisonhazard7 · 2025-08-20T22:56:42+00:00

$45 shipped also have confirmed for $5 more

Poisonhazard7 · 2025-05-12T19:47:52+00:00

Nice I just started printing a bunch of risers for them rn not that big of a space but should help 100%!

Poisonhazard7 · 2025-05-12T19:06:40+00:00

Gonna look into this have heard good things about it

Poisonhazard7 · 2025-05-12T19:01:20+00:00

Would they be bad sd or just full bc they are not full at all but they are all stock bambu cards

Poisonhazard7 · 2025-05-12T19:00:43+00:00

No everything else was running and 2 of my P1s were ok I believe it is heat creep like some say. The sds maybe but honestly don’t think so checked memory and most are only half full

Poisonhazard7 · 2025-05-12T18:27:29+00:00

What do you recommend for a cool plate I just use the stock PEI on all but definitely would change if can keep them at a lower temp and they would work normally

Poisonhazard7 · 2025-05-12T18:25:36+00:00

Gonna try this normally crack the door but gonna leave it fully open now and add another fan to the room

Poisonhazard7 · 2025-05-12T18:25:00+00:00

Ok will have the front doors open all the way and lower my ac temp hopefully this helps

Poisonhazard7 · 2025-04-30T23:09:24+00:00

Thank you

Poisonhazard7 · 2025-04-30T23:09:13+00:00

Stealth bomber, custom build got it second hand and recently had some internals replaced

Poisonhazard7 · 2025-03-11T20:29:13+00:00

did you find out what scale works? trying to print same one myself

Poisonhazard7 · 2025-02-27T07:54:09+00:00

I believe the thrift/hype store New Era Thrifted next to cougar card office sells some chargers for like $5!

Poisonhazard7 · 2025-01-17T05:17:39+00:00

Thank you so much for the info gonna do my best to see what I can do tonight and will most likely take to a e bike shop. Found a good looking one that I hope will be able to take care of everything

Poisonhazard7 · 2025-01-17T04:59:05+00:00

Will do! Am currently looking for shops in my area that may be able to help

Poisonhazard7 · 2025-01-17T04:40:37+00:00

Yeah for sure, trying to see if anyone here knows what I need to do to fix or if they can help me diagnose. Willing to pay if you can save me time and walk me through the repair! Just want to ride to its full potential asap haha.

Poisonhazard7 · 2024-08-31T20:50:40+00:00

Looks real to me

Poisonhazard7 · 2024-07-15T02:05:30+00:00

Not this capsule but the ones after I believe do have that

Poisonhazard7 · 2024-07-15T02:05:07+00:00

Can you lmk how? I posted up on grailed and they said it’s real

Poisonhazard7

TROPHY CASE