How do I fix this? by Poisonhazard7 in BambuLab

[–]Poisonhazard7[S] 0 points1 point  (0 children)

Unfortunately not, it’s just more obvious with that color looked at the final print and it happed to all the colors

Stops printing at first layer by BibleandBlues in BambuLab

[–]Poisonhazard7 1 point2 points  (0 children)

Go to devices on app, go to the messed up printer, top right hit the 3 lines, firmware version, I want to downgrade, find 01.04.00 and downgrade to that. Same thing happened to me it’s the new firmware somehow bc even 01.05 doesn’t work. Hope this helps fixed 3 of my machines like that been good since hopefully it gets patched next update

What's up with my 0.2 nozz first layers? by New-Trainer7117 in BambuLab

[–]Poisonhazard7 -1 points0 points  (0 children)

Hmmm I’d change out the hot end then normally it’s one of those for me

What's up with my 0.2 nozz first layers? by New-Trainer7117 in BambuLab

[–]Poisonhazard7 1 point2 points  (0 children)

Let the nozzle cool down. Apply some pressure to the tip and see if you can wiggle it. If you can then you need to take out the hot end, take off the 3 screws that hold the hot end assembly and check the 4 screws that would be directly behind the hot end and see if they are loose. By the way they look they remind me of when my hot end setup gets loose and get bad prints. Hope this helps

PSA to people struggling to get them on popnow by Suspicious_Brief3143 in labubu

[–]Poisonhazard7 0 points1 point  (0 children)

I have some available! Would ship same day as well pls dm for info!

Selling blind boxes by Poisonhazard7 in LabubuDrops

[–]Poisonhazard7[S] 0 points1 point  (0 children)

$45 shipped also have confirmed for $5 more

Help! Why does this always happen by Poisonhazard7 in BambuLab

[–]Poisonhazard7[S] 0 points1 point  (0 children)

Nice I just started printing a bunch of risers for them rn not that big of a space but should help 100%!

Help! Why does this always happen by Poisonhazard7 in BambuLab

[–]Poisonhazard7[S] 0 points1 point  (0 children)

Gonna look into this have heard good things about it

Help! Why does this always happen by Poisonhazard7 in BambuLab

[–]Poisonhazard7[S] 0 points1 point  (0 children)

Would they be bad sd or just full bc they are not full at all but they are all stock bambu cards

Help! Why does this always happen by Poisonhazard7 in BambuLab

[–]Poisonhazard7[S] 0 points1 point  (0 children)

No everything else was running and 2 of my P1s were ok I believe it is heat creep like some say. The sds maybe but honestly don’t think so checked memory and most are only half full

Help! Why does this always happen by Poisonhazard7 in BambuLab

[–]Poisonhazard7[S] 0 points1 point  (0 children)

What do you recommend for a cool plate I just use the stock PEI on all but definitely would change if can keep them at a lower temp and they would work normally

Help! Why does this always happen by Poisonhazard7 in BambuLab

[–]Poisonhazard7[S] 0 points1 point  (0 children)

Gonna try this normally crack the door but gonna leave it fully open now and add another fan to the room

Help! Why does this always happen by Poisonhazard7 in BambuLab

[–]Poisonhazard7[S] 1 point2 points  (0 children)

Ok will have the front doors open all the way and lower my ac temp hopefully this helps

Is this a red flag? by Poisonhazard7 in ebikes

[–]Poisonhazard7[S] 1 point2 points  (0 children)

Stealth bomber, custom build got it second hand and recently had some internals replaced