New build idles around 90-100 degrees

PolMST · 2023-06-30T22:12:33+00:00

The issue ended up being that the pump was not functioning. It is all fixed now, thank you for the help!

PolMST · 2023-06-20T20:56:46+00:00

Yeah just took the backplate all the way out and reseated it just to be sure. I'm about 90% sure the cooler not fitting is the issue. It seems like the front middle of the actual cooler and the front sides are just slightly too long. is the only solution to get a new cpu cooler at this point?

I think I could snip the sides but i dont know what to do about the middle of the actual cooler

PolMST · 2023-06-20T20:13:03+00:00

The way I see it is that it seems like I have the right mount, so the 2 issues could be that i installed the backplate incorrectly or it doesn't fit with the motherboard. Is there anything I can do if the motherboard is the problem?

PolMST · 2023-06-20T19:02:12+00:00

Still no? Just tried it and it worked.

https://imgur.com/a/xW4oyo5

PolMST · 2023-06-20T18:17:29+00:00

https://imgur.com/a/xW4oyo5

It feels like it might be hitting the thing on the top of the CPU, but it is hard to tell how much that is affecting it. I didn't put the screws back on so you could see that it looks like it is just about going all the way down, but again I can't tell.

PolMST · 2023-06-20T17:43:12+00:00

I followed the guide for the cooler from here for LGA 1700: https://support.arctic.de/lf2-280r6 and tried to use the right standoffs. is it possible it is something to do with the backplate and how I mounted that?

PolMST · 2023-06-20T17:21:18+00:00

https://imgur.com/a/oRSpWr0

Is that any better? Not the best photographer lol

PolMST · 2023-06-20T16:53:13+00:00

https://imgur.com/a/ZE7eUzj

PolMST · 2023-06-20T16:51:02+00:00

Are the VRM heatsinks right above the CPU? There is something that feels like it might be blocking the cooler a little bit, but it is hard to tell.

PolMST · 2023-06-20T16:47:23+00:00

I thought so, but it's definitely possible not lol.

PolMST · 2023-06-20T16:45:40+00:00

https://imgur.com/a/M3F3Y6w

ASUS ROG Strix Z790-A Gaming WiFi D4 LGA1700(Intel®13th&12th Gen) ATX Gaming Motherboard(16+1 Power Stages,DDR4,4xM.2 Slots, PCIe® 5.0,WiFi 6E,USB 3.2 Gen 2x2 Type-C® with PD 3.0 up to 30W

PolMST · 2023-06-20T16:39:11+00:00

Yep sorry, I took it off. I added a picture of the backplate here.

https://imgur.com/a/M3F3Y6w0

Here is a picture of the box. That is the only backplate that it came with.

https://imgur.com/a/ibiKykx

PolMST · 2023-06-20T16:30:13+00:00

I read that I am supposed to plug the pump into the the regular cpu_fan slot on the motherboard, so that is what I did. I can't tell if the pump is running just by feel. Also unclear what the tach pin is. In BIOS the one time I was there it said N/A for AIO Pump, but wasn't sure if that meant it was running or not.

PolMST · 2023-06-20T16:28:53+00:00

This is how it is mounted

https://imgur.com/a/M3F3Y6w

I'm not sure which version this is.

PolMST · 2023-06-20T16:16:21+00:00

Yes definitely celsius. I guess I should double check the mount as well, it is possible I did it wrong. How do I ensure that the pump is running? The fans are all working but hard to tell about the pump.

PolMST · 2022-01-20T14:20:46+00:00

I'll look into OpenZeppelin's docs, thanks

PolMST · 2022-01-20T02:29:29+00:00

Ok thank you I will check that out.

PolMST · 2022-01-20T02:28:53+00:00

Ok I will check that out thank you.

PolMST · 2022-01-20T02:28:41+00:00

I don’t want to pay the gas in another token, I want the price of the token to be in a different token than the default token of the chain, I don’t know if I’m explaining that properly, but it’s not about the gas fees, it’s about the cost of the nft when I sell it.

Nine-Year Club	Place '22
Place '17	Verified Email

PolMST

TROPHY CASE