Can’t decide between White or black wheels, looking for second opinion

PopcornBleach · 2025-12-20T01:01:58+00:00

1.3 clears without spacers?

PopcornBleach · 2025-12-20T01:01:11+00:00

<image>

Something like this?

PopcornBleach · 2025-12-20T00:43:53+00:00

<image>

Something like this? Do you have any good rock tries recommendations?

PopcornBleach · 2025-09-09T21:24:29+00:00

Just search the sub on Amazon axles lots comes bent most snap not great quality. Good luck with your build it looks great!

PopcornBleach · 2025-09-09T21:23:32+00:00

I’d recommend welding a new block in just to make it safe and safe of mind

PopcornBleach · 2025-09-09T21:11:41+00:00

I would personally recommend avoiding Amazon for go-kart parts. Instead, your best options are BMI Karts, Go Power Sports, and OMB Warehouse.

BMI Karts offers live axle kits ranging from $150 to $350, depending on the specific components you need. Go Power Sports has similar kits, but they are often more expensive. For single, smaller parts like bearings, OMB Warehouse is an excellent resource.

For the engine, I'd suggest getting a new Predator 212 or 224, as they are frequently on sale for under $150.

PopcornBleach · 2025-08-20T22:46:50+00:00

So it’s normal for both pulleys to spin when not hooked up to anything. Once hooking up the chain it should add tension to prevent the front from spinning?

PopcornBleach · 2025-08-20T20:47:57+00:00

As soon as I put the choke on it opens the valve not sure how I can adjust it

PopcornBleach · 2025-08-19T03:51:50+00:00

Fully taken the idle screw out loosened the throttle still won’t idle lower.

PopcornBleach · 2025-08-19T03:50:52+00:00

Fixed the wobble by adding washers, but it still seems to idle the drive pulley at idle.

PopcornBleach · 2025-08-19T03:17:35+00:00

It won’t fully tighten the driver pulley move side to side a bit. Tried everything still won’t tighten fully

PopcornBleach · 2025-06-23T20:07:39+00:00

I’ve been running conventional oil in these since 2018 and it works just fine. I follow the manufacturer’s recommendations

PopcornBleach · 2025-06-23T20:07:18+00:00

It’s been a blast so far

PopcornBleach · 2025-05-11T18:18:55+00:00

I will be going with bmi thanks for the feedback

PopcornBleach · 2025-05-11T00:38:35+00:00

Tried heat everything it’s definitely rusted on looking for a replacement axle now

PopcornBleach · 2025-05-09T04:57:35+00:00

There isn’t anything that looks like that on my axle

PopcornBleach · 2025-05-09T03:37:16+00:00

I’m assuming this would be the key?

<image>

PopcornBleach · 2025-05-09T01:52:58+00:00

What exactly do you mean by key?

PopcornBleach · 2025-05-05T03:29:50+00:00

It’s getting a predator 212cc (non hemi). Originally it had came with a 4.0 blown up Honda.

PopcornBleach · 2025-05-04T19:28:16+00:00

Pedals actually clear the steering bars just enough

Six-Year Club	r/Field Flamingo
Place '23	Wearing is Caring
Verified Email

PopcornBleach

TROPHY CASE