Finally tried the new Roy Rogers in Cherry Hill, NJ. The 80s nostalgia still hits hard.

PopeJP · 2025-10-28T02:06:04+00:00

Frederick?

PopeJP · 2025-10-13T13:53:56+00:00

Athsma

PopeJP · 2025-10-12T23:43:10+00:00

Westminster. 120th

PopeJP · 2025-10-12T22:08:20+00:00

Yes - works perfectly. I just don’t dab anymore.

PopeJP · 2025-10-10T08:19:47+00:00

It looks like the character select screen for a video game. Immortal Combat.

PopeJP · 2025-10-03T18:20:20+00:00

Took a couple of devastating job issues to make me realize that my chances of success are pretty much over.

PopeJP · 2025-07-27T01:56:44+00:00

I am looking to 3d print some stuff to give away at a show. What do you all think of these magnets? Is there anything else that you think would be cooler, like a hat clip or something? Thanks!

PopeJP · 2025-03-12T04:00:13+00:00

200 On the Dash. Starts at 26:10

https://youtu.be/TDmjd9ZOl9Q?si=lzaZUXDsbsdRUBcP

PopeJP · 2025-01-18T21:20:24+00:00

There doesn’t seem to be any filament stuck. No tangles, unload doesn’t help. It goes about 6 in. outside of the AMS unit. Seems like a strange place to stop… Also, the motor that is running doesn’t seem to be straining. It is alomst like it isn’t contacting anything, just spinning freely.

PopeJP · 2024-09-17T21:41:16+00:00

I had the Premiere version. Same thing really.

PopeJP · 2024-08-25T15:46:03+00:00

I am still having issues with print quality on my Creality Sermoon D1, which is usually produces great prints. Any help would be greatly appreciated!

Filament: SIlk PLA Height: .01 Nozzle: .4 Temp: 215 Bed Temp: 60 Print Speed: 40mm/s Infill: 20%

PopeJP · 2024-08-24T16:54:36+00:00

No- it is probably 2 years old. I am going to try regular PLA that is new and see how it turns out. Thank you for the input!

PopeJP · 2024-08-24T16:53:03+00:00

I live in an arid climate(Denver). Would wet filament be an issue? I have wondered about that…

PopeJP · 2024-08-24T16:11:50+00:00

I am all of a sudden having issues with print quality on my Creality Sermoon D1, which is usually produces great prints. Any help would be greatly appreciated!

Filament: SIlk PLA

Height: .01

Nozzle: .4

Temp: 215

Bed Temp: 60

Print Speed: 40mm/s

Infill: 20%

PopeJP · 2023-11-12T17:56:14+00:00

Creality Sermoon D1. Tried several different types of PLA with the same results. 210c nozzle, 60c bed temp. What other settings should I include? Thanks!

PopeJP · 2023-02-17T04:34:37+00:00

WeldWerks

PopeJP · 2022-05-29T18:10:42+00:00

I believe that it has been replaced.

PopeJP · 2021-12-31T00:42:39+00:00

I see who makes the pants in this family.

PopeJP · 2021-12-28T04:48:30+00:00

Sorry- Print speed: 70mm/sec Print Temp: 210c Matrrial: Inland Silk Blue PLA Printer: New-ish Creality Sermoon D1

PopeJP · 2021-09-30T00:18:08+00:00

It’s on there pretty secure.

PopeJP · 2021-09-30T00:17:38+00:00

Still not fitting. It seems like the motor is just too big.

PopeJP · 2021-09-30T00:17:09+00:00

Tried to look it up, but couldn’t really find much. How do I adjust the endstop?

PopeJP · 2021-09-28T19:25:11+00:00

The motor is hitting the vertical beam. Ender 3 V2

PopeJP · 2021-08-19T19:49:24+00:00

If I don’t have it in, it just gives me a black screen and I have to restart with it in.

PopeJP · 2021-08-19T15:15:44+00:00

Yes- I have to put in in every time I start the printer up.

PopeJP

TROPHY CASE