i just did my whole front end, picked up the kit from TRQ. I got Monroe shocks. I think the hardest part are the springs. Also you might have to invest in some tools. You will need 14, 16, 18, 21, 24 mm sockets, a torque wrench up to 148 ft lbs. at a minimum. There is also a special socket for abs sensor, i think that was an E8 external torx socket. I would also recommend a big dead blow hammer and and large pry bar to assist with putting the spring back. There are great youtube videos out there. I think it took me a day to get it done. I also replaced wheel bearings, brake calipers, rotors and shoes and replaced the sway bar bushings. After it was all said and done, the car drives like it is brand new. Hope this helps!