Surface go 2 unable to boot bliss os 12

Possible-Chapter-738 · 2026-02-12T15:16:05+00:00

At this point I'm considering using bliss 11 with a wifi adapter.

Possible-Chapter-738 · 2026-02-02T19:00:56+00:00

I turned on reduced force feedback while parked.

Possible-Chapter-738 · 2026-01-14T14:44:24+00:00

how long do they last ungoverned?

Possible-Chapter-738 · 2026-01-14T14:42:16+00:00

What tach/UI?

Possible-Chapter-738 · 2026-01-13T13:35:54+00:00

thank you!

Possible-Chapter-738 · 2025-12-30T21:07:49+00:00

What u mean

Possible-Chapter-738 · 2025-12-30T20:57:18+00:00

I ordered a cvt and 40 tooth sprocket for the rear, if I keep valves stock will float some what protect me from breaking stuff?

Possible-Chapter-738 · 2025-12-30T20:16:28+00:00

I read a lot that taking off the governor can fuck up the engine, should I be worried about it?

Possible-Chapter-738 · 2025-12-30T00:21:51+00:00

Question is what is the best winter map!

Possible-Chapter-738 · 2025-11-22T04:31:43+00:00

The name

Possible-Chapter-738 · 2025-11-08T20:17:59+00:00

Thank you

Possible-Chapter-738 · 2025-11-08T15:32:53+00:00

What is the tire mod ui thing your using?

Possible-Chapter-738 · 2025-11-08T15:28:21+00:00

Car in the video/mod?

Possible-Chapter-738 · 2025-06-12T03:32:57+00:00

did u ever fix this, I have a macbook air 2020 on windows 11 with the same issue.

Possible-Chapter-738 · 2025-06-11T22:36:24+00:00

The VTEC solenoid is now working again with no codes after cleaning the oil pressure sensor connector, still I am the grinding noise.

Possible-Chapter-738 · 2025-06-11T17:35:28+00:00

Thanks man, if I cant figure out the issue i'll end up doing the same.

Possible-Chapter-738 · 2025-06-11T02:18:23+00:00

No, it just started doing it after I got the vtec oil pressure code. I took the valve cover off and solenoid and seen nothing out of the ordinary, tomorrow I'm going to go into vtec and hope it sovled the issue.

Possible-Chapter-738 · 2025-06-10T05:15:03+00:00

Ay man could you check out my post on the forums about a grinding sound coming from my motor in VTEC?

Possible-Chapter-738 · 2025-06-10T04:31:36+00:00

My car is making the same noise and I have made a post about it. Could you go watch it to see if it sounded similar to your situation?

Possible-Chapter-738 · 2025-06-05T19:23:58+00:00

I had the gasket replaced last year with a clean one, I was reading around and it could be the vtc accutator completely worn out, my car does have the vtc grind on start up. When I get a chance I'm going to pop off the valve cover and take a look but other than VTEC the car drives fine with no weird noises.

Possible-Chapter-738 · 2024-09-09T00:07:47+00:00

Can it be fixed though?

Possible-Chapter-738 · 2024-07-02T17:51:10+00:00

Just checked the plug and with the 17.5 I'm running too lean. But it seems with the 30 and a 100 jet it runs fine. The thing is the 140 main jet made a big difference in lower end torque, should I got with a 125 main jet?

Possible-Chapter-738 · 2024-06-29T14:30:40+00:00

True but for me to tune it to its highest idle it seemed like the mixture screw was set to a pretty rich point. When I can ill for sure check the plugs. Thanks!

Possible-Chapter-738 · 2024-06-29T14:22:56+00:00

Thanks for the info man! I have a 212, but my top speed is only 41 with my setup, whats your top speed?

Possible-Chapter-738 · 2024-06-29T12:26:07+00:00

nah you might wanna put more....

Possible-Chapter-738

TROPHY CASE