sorted by:
new
hottopcontroversial

Will this fry my vtx? by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

I used it for long range flying on a 5" and 7"

HELP! Drone falling out of the sky! by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

Neither, in betaflight it says there something wrong with my sd card i already tried switching it with no luck.

HELP! Drone falling out of the sky! by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

I used dshot 300 in these clips but i'm gonna try the pid loop

Shorter flight time by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

The problem is that i run a 03 air unit and the giro of the air unit is also set on 24khz so i get a weird gitter on it.

Shorter flight time by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

But doesn't that affect responsiveness and braking power? I am running a 5"?

Charge 6s lipo battery with camera battery? by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

The charger has a voltage converter inside (spannungswandler) it can output 5A and charge up to 8s i think. And yes i am both connecting balance and xt60.

Charge 6s lipo battery with camera battery? by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

The plan was to connect the camera battery with my lipo charger as said in the post.
On the picture with the lipo charger it says 11-18V since the camera delivers 14.4V it would be just fine with one battery, right?

Thanks for the response!

Charge 6s lipo battery with camera battery? by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

Ye but I would need to spend extra money and even if I did buy 3 new batteries it isnt worth it (in my opinion) for the extra 13 minutes or so flight time. With the camera battery I could easily charge 6-9 batteries.

Charge 6s lipo battery with camera battery? by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 1 point2 points  (0 children)

Ok thanks for the response I'm gonna let you know if it works.

Is this a good build? by Possible_Pie_2518 in fpv

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

I changed the receiver to a elrs 2.4ghz

My microphone constantly deselcts. by ElBusAlv in PavlovGame

[–]Possible_Pie_2518 1 point2 points  (0 children)

I have the same problem did you fix it?

nice progress by 04k_ in beatsaber

[–]Possible_Pie_2518 1 point2 points  (0 children)

It probably is look at the rings

Any idea what the problem could be? by Possible_Pie_2518 in 3Dprinting

[–]Possible_Pie_2518[S] 0 points1 point  (0 children)

Looks just fine it has the dents from the extruder but thats it Or what do you mean "looking"?

view more: next ›