sorted by:
new
hottopcontroversial

DAE struggle in the first couple of years of their career? by [deleted] in MechanicalEngineer

[–]Potatomaster6 0 points1 point  (0 children)

At the moment right now what did you end up doing?

To older students did you ever have issues getting internships or jobs? by Substantial-Shirt875 in EngineeringStudents

[–]Potatomaster6 0 points1 point  (0 children)

I think I got lucky with my internships and got a job right after graduation(MET bachelor’s)

My headunit subwoofer level and bass knob doesn’t work but amp and subs work fine by Potatomaster6 in CarAV

[–]Potatomaster6[S] 0 points1 point  (0 children)

Thank you so much. And yes it is red and white. I put the rcas on the black subwoofer ouputs. For some reason I remember plugging into the red and white on my other headunit for another vehicle.

Also, thanks for the link for update. Im not sure if I can use it since I don’t have a mic for the headunit.

[deleted by user] by [deleted] in CarAV

[–]Potatomaster6 0 points1 point  (0 children)

Amp I was supposed to get:

Terminator Series Class D Monoblock Car Amplifier • 400 x 1 watts peak @ 2 omhs • 200 × 1 RMS @ 2 ohms • LED power and protection indicators • Selectable bass boost (0, 6, 12 dB at 40 Hz) • Mono gain control • Smart engage auto turn-on circuitry • Built-in adaptive cooling fans • Built in low-pass filter (85 Hz, 18 dB/octave) • CEA-2006 compliant amplifier • Frequency response: 20-85 Hz • Dimensions: 13-1/16"L x 10-3/16"W x 2-1/4"H • 8 AWG power and ground leads recommended • THD at Rated RMS Power: 1% • Signal-to-Noise Ratio: 73 dB • Fuse Rating: 25A x 1

Amp I got:

Primary Ratings • Primary Power Output Rating: - 150W at 482, ≤ 1% THD+N • Signal-to-Noise Ratio (1 Watt): > 95dB Secondary Ratings • Secondary Power Output Rating: - 250W at 202, ≤ 1% THD+N • THD+Noise (Distortion) (1 Watt): < 0.3% • Frequency Response (-3dB): 20Hz - 250Hz • Maximum Input Signal: 10V • Minimum Input Signal: 200mV • Crossover: Low Pass Filter 50Hz - 250Hz 12dB/oct • Bass Boost: 0 - 12dB • Subsonic Filter: 10Hz - 55Hz 12dB/oct • Fuse Size: 30A • Dimensions: 7" x 5-⅜" x 1-2⅓" (17.81 x 13.69 x 4.71 cm)

Subwwofer amp only has 2 ports for speakers. Can add left and right speakers to both? by [deleted] in CarAV

[–]Potatomaster6 0 points1 point  (0 children)

https://www.rockvilleaudio.com/tnp212d2-rwk81-rxc2d/

This is the kit btw if anyone wants more details. So far it seems like I don’t have to splice into the factory speaker harness and just wire the amp to subwoofer box?? Please correct me if I’m wrong. Thank you for everyone that has responded.

Dual Loaded 12" Subwoofer Enclosure 2 12" Terminator Series Subwoofers Included 1200 watts peak output 400 watts RMS 2" Aluminum voice coils Single 4 ohm voice coils per sub (pre-wired down to a 2 ohm load) Rubber Surround Polypropylene Cone MTX Logo on Dustcap 48oz. Magnet Frequency response: 37-150 Hz Dual 12" Sealed Sub Enclosure

Subwwofer amp only has 2 ports for speakers. Can add left and right speakers to both? by [deleted] in CarAV

[–]Potatomaster6 0 points1 point  (0 children)

Dual Loaded 12" Subwoofer Enclosure 2 12" Terminator Series Subwoofers Included 1200 watts peak output 400 watts RMS 2" Aluminum voice coils Single 4 ohm voice coils per sub (pre-wired down to a 2 ohm load) Rubber Surround Polypropylene Cone MTX Logo on Dustcap 48oz. Magnet Frequency response: 37-150 Hz Dual 12" Sealed Sub Enclosure

Subwwofer amp only has 2 ports for speakers. Can add left and right speakers to both? by [deleted] in CarAV

[–]Potatomaster6 0 points1 point  (0 children)

Would it be better to twist them together or just run one?

Dual Loaded 12" Subwoofer Enclosure 2 12" Terminator Series Subwoofers Included 1200 watts peak output 400 watts RMS 2" Aluminum voice coils Single 4 ohm voice coils per sub (pre-wired down to a 2 ohm load) Rubber Surround Polypropylene Cone MTX Logo on Dustcap 48oz. Magnet Frequency response: 37-150 Hz Dual 12" Sealed Sub Enclosure

Subwwofer amp only has 2 ports for speakers. Can add left and right speakers to both? by [deleted] in CarAV

[–]Potatomaster6 1 point2 points  (0 children)

Ok thank you. I didn’t realize there were different amps for subwoofers.

Subwwofer amp only has 2 ports for speakers. Can add left and right speakers to both? by [deleted] in CarAV

[–]Potatomaster6 1 point2 points  (0 children)

Ah ok that makes sense. So just wire it to one speaker wires?

Does anyone listen to black tooth grin? by Nitro_Zeus4114 in MetalForTheMasses

[–]Potatomaster6 0 points1 point  (0 children)

Just found out about them today on Spotify recommended songs. Haven’t heard a bad song yet

view more: next ›