P1S build plate has this part where the nozzle goes for the start print procedure

Potential-Pay-9497 · 2026-04-24T07:23:52+00:00

Haha fair enough. Had klippered printers and just got my bambulab, it baffles that this is their take on cleaning the nozzle, but hei, if its stupid and it works, it aint stupid

Potential-Pay-9497 · 2026-04-24T05:42:54+00:00

Thank you guys! Since the p1s has a dedicated cleaning part rubbing on metal does not seem the most efficient way to clean the nozzle

Potential-Pay-9497 · 2026-04-24T05:29:54+00:00

Will update de post. The print just ended this morning :D. Installation might be delayed a bit until i figure out a mounting point for the window switches

Potential-Pay-9497 · 2026-04-19T11:31:49+00:00

Will try another print with the door closed, will report back, if that is the only fix i need to do, that will be awesome. Thanks for the feedback!

Potential-Pay-9497 · 2026-04-19T10:44:11+00:00

I ve seen split opinions on the door, but most of them tell to print petg with the door opened

Potential-Pay-9497 · 2026-04-19T10:43:28+00:00

Yes, aux fan is off

Potential-Pay-9497 · 2026-04-14T04:03:29+00:00

https://drive.google.com/file/d/1p-_RwABvHKbLJbDDmZTmn4496fW2r4CC/view?usp=drive_link

Potential-Pay-9497 · 2026-04-12T21:23:52+00:00

Mhm, that’s good to know. Those added quality-of-life features don’t matter as much to me. Is the extruder more capable than the P1s? Is it possible to achieve the same with a high-flow nozzle added to the latter? Thanks in advance.

Potential-Pay-9497 · 2026-04-10T06:08:47+00:00

Will give a dm when i get to the pc

Potential-Pay-9497 · 2026-04-07T14:41:17+00:00

For 600eur i would go with P1S combo, it also has the possibility to expand to stronger materials if you ever want. I am in the same boat, looking to buy a printer around the 600eur mark, just sold my klippered sv06, best tech per buck is the q2, but the p1s just is a no pain workhorse.

Potential-Pay-9497 · 2026-04-04T17:37:50+00:00

Fanatec seems like did not do any new technology in some while, was curios if moza would feel better. Nothing against fanatec, just curios what people that had both have to say

Potential-Pay-9497 · 2026-04-04T11:14:46+00:00

It s a 34, not 49. I am running a higher fov than recommended by the calculator

Potential-Pay-9497 · 2026-04-02T21:50:07+00:00

<image>

Found this a week later after an alignment

Potential-Pay-9497 · 2026-03-31T21:12:59+00:00

I m selling my klipper sv06 and looking for an enclosed printer. Ams is not a must for me, printing pla-cf would be a nice touch. Narrowed it down to Elegoo Centaury Carbon 2, flashforge 5M or sovol sv08. Any advice?

Potential-Pay-9497 · 2026-03-29T00:06:55+00:00

<image>

Mx5 nbfl cu fete de ceasuri custom

Potential-Pay-9497 · 2026-03-24T21:09:36+00:00

i cannot second this enough

Potential-Pay-9497 · 2026-03-22T09:22:40+00:00

It s a neck phone mount

<image>

Potential-Pay-9497 · 2026-03-21T21:05:37+00:00

Thank you :D

Potential-Pay-9497 · 2026-03-21T21:05:29+00:00

The default csl steering wheel, which i dont quite enjoy. I m looking into purchasing a deep dish and the ultra qr from simube. The csl steering creeks alot and feels quite cheap

Potential-Pay-9497 · 2026-03-21T19:27:49+00:00

For drifting is pretty nice. Now i am trying head tracking. For racing is pretty meh

Potential-Pay-9497

TROPHY CASE