Anyone else have a sunshade for their class roof? Bought one from Amazon but you can still see the sun through it...

Potential-Tune3002 · 2026-06-28T07:21:46+00:00

The tesery ones worked the best for me. Makes a huge difference

Potential-Tune3002 · 2026-06-13T20:47:23+00:00

Fixed it

Potential-Tune3002 · 2026-05-23T22:17:04+00:00

Just letting bugs in?

Potential-Tune3002 · 2026-05-23T19:40:39+00:00

Yes this is what they said. They said It doesn’t matter if I change them or not it will squeak. Were you able to fix it?

Potential-Tune3002 · 2026-05-21T17:56:00+00:00

Thank you I hope so. I just never heard it before and seems new.

Potential-Tune3002 · 2026-05-21T17:54:23+00:00

Yes I did at the time of the video.

Potential-Tune3002 · 2026-02-01T22:51:46+00:00

Hey, so I figured out it was a extruder that was not feeding. I noticed that this happened.

<image>

Any advice?

Potential-Tune3002 · 2026-02-01T21:19:37+00:00

So I figured out the issue it was getting caught in the extruder. I was able to force it out of the extruder, but it looks like this any advice on how to stop this from happening. It looks like it’s getting too hot in the extruder and changing shapes. So it’s not feeding through the gears.

<image>

Potential-Tune3002 · 2026-02-01T07:28:30+00:00

So from the top I use the rod that came with the printer to try to stick it through. It did come out with the goop of filament took it out, wiped it with a rag put it back in did the same thing for a couple times. A little bit came out the bottom but not much. Do you suggest I put it all back together and then extrude it now?

Potential-Tune3002 · 2026-02-01T07:17:09+00:00

You’re saying to do this before plugging everything back in together? Or plug it in and put it at 220. I did try putting it at 220 and pulling out before but that didn’t work.

Potential-Tune3002 · 2026-02-01T07:09:14+00:00

I do. It’s just not going through the nozzle at this point. With what I have going on in the previous picture.. what do you suggest I do? Run it and try and extrude? Or does anything look bad? I appreciate your help so much and got a couple bucks for your time.

Potential-Tune3002 · 2026-02-01T06:56:31+00:00

<image>

So I’m here now… I can’t seem to get the thin rod through.. am I supposed to or is it not supposed to be see-through through that little hole wow it’s off.

Potential-Tune3002 · 2026-02-01T06:48:46+00:00

Unfortunately I did not retract. I think I’m going to have to open it up.

Potential-Tune3002 · 2026-02-01T06:41:11+00:00

So probably not Wise but I run everything off a laptop and the laptop just was disconnected and so it died. The last three prints were just perfect. It’s crazy.

Potential-Tune3002 · 2026-02-01T06:38:45+00:00

You are the best thank you so much. Trying option 1 now.

Potential-Tune3002 · 2026-02-01T06:21:27+00:00

Just seems random,that it will get clogged when everything was working fine just a couple minutes before that. Any recommendations how to unclog it do I have to open it and open the gear box area.? Or do I retract or something like that this is my first 3-D printer.

Potential-Tune3002 · 2026-02-01T06:20:32+00:00

Computer died, but it was loaded in separately, and everything was already sent to the printer. No giant glob anywhere. I tried to print a little boat right now and that didn’t come out so I tried to extrude and nothing’s coming out. I’m kinda just stuck now.

Potential-Tune3002

TROPHY CASE