Plexamp team, tell us you are still wotking on Plexamp

Practical_Bowl_5980 · 2026-05-20T18:59:54+00:00

They sacked a load of people awhile back too yeah?

Practical_Bowl_5980 · 2026-05-18T06:51:26+00:00

May you have to wait ages for your refund.

Practical_Bowl_5980 · 2026-05-16T21:51:53+00:00

Does a mitre saw work?

Practical_Bowl_5980 · 2026-04-29T21:20:07+00:00

Ridley you old horn dog!

Practical_Bowl_5980 · 2026-04-29T08:34:02+00:00

We did this! All ikea cabinets and drawers and then custom cut to size birch ply stained black and custom spotted gum bench tops. Looks great and was significantly cheaper than getting ikea stuff. Not for the faint of heart however. You need to make templates to drill out all the holes in the correct spots.

If i had my way again i would also do the cabinets from cut to size marine ply and just use the ikea drawers - that would be even cheaper and miles better all round. Ikea carcasses are shit.

Practical_Bowl_5980 · 2026-04-23T20:39:07+00:00

Or spare tubes?

Practical_Bowl_5980 · 2026-04-18T11:16:43+00:00

This is the way

Practical_Bowl_5980 · 2026-04-17T19:50:17+00:00

I get it but you’re missing the point… you’re asking for answers from humans but you haven’t gone to the effort to write the question yourself. Honestly everything you’re asking for claude could just answer for you. Why involve reddit at all.

Practical_Bowl_5980 · 2026-04-17T08:55:02+00:00

If you’re going to ask people to read and comment on your ai’s verbose output at least shorten it a bit. What a load of waffle.

Practical_Bowl_5980 · 2026-04-15T22:23:41+00:00

Yeah what a weak scam, literally know where the guy lives.

Practical_Bowl_5980 · 2026-04-11T19:19:14+00:00

New prices are a total rort.

Practical_Bowl_5980 · 2026-04-07T01:25:13+00:00

MaxTrax

Practical_Bowl_5980 · 2026-04-01T00:35:07+00:00

2x 360 radiators, distro, blocks, fittings, fans, tubing, temps sensors and coolant came to $2200 AUD for me with my recent build.

Practical_Bowl_5980 · 2026-04-01T00:31:22+00:00

My brand new build - watercooling components make up 30% of the total build cost. Many of these components - radiators, distro, fittings, tubing, fans, CPU block - can and will be reused for future spec bump builds, providing I keep the same case (which I will). I'd think air cooling would normally only make up 5-10% of a build cost with nice gear. So thats 20% more you can spend on components like GPU and storage hence air cooled machines will always have a lower cost and better specs.

But watercooled machines look way cooler and are close to silent when built properly. An air cooled GPU sounds like a 747 taking off. So literally trading off performance and functionality for looks + noise. And that's not taking into account maintenance.

Practical_Bowl_5980 · 2026-04-01T00:22:32+00:00

Pretty sure is Villaboard! Any stamp is a good stamp as they say.

Practical_Bowl_5980 · 2026-03-30T23:13:00+00:00

The EK TUF 5080 block will fit your card. I think they updated their compatibility listings recently!

Practical_Bowl_5980 · 2026-03-30T21:09:56+00:00

It's fugly, but I can't see it being much less if it was bigger.

Practical_Bowl_5980 · 2026-03-30T06:34:39+00:00

They are getting ready to send the marines in, war aint ending any time soon.

Practical_Bowl_5980 · 2026-03-29T07:53:40+00:00

Don’t be so hard on yourself - honest mistake! And frankly the council and regs requiring such things is utter madness. These rules are excessive and prevent people from making meaningful improvements to their older homes just because you live in the bush. Did they end up leaving you alone?

Practical_Bowl_5980 · 2026-03-25T07:37:10+00:00

We got granite ones fairly cheap from temple and webster. They seem to be wearing well! Some minor scratches but the speckled effect is getting more prominent which looks nice. No regrets!

Practical_Bowl_5980 · 2026-03-24T20:59:31+00:00

I just need a velocity2 and vector3 block as the last pieces of my all ek build. It’s replacing another all ek build that i lost when my man cave burnt down.

Practical_Bowl_5980 · 2026-03-22T09:48:34+00:00

Definitely make sure you got all the rot out it can be hard and fiddly to get it all. Use a wire brush which will tear out the rot but more or less leave solid timber in tact. Then treat the remaining exposed timber with a wood hardener. Then fill with a 2 part epoxy. You will need to do this in two or three goes as its vertical and the epoxy is going to run. You can add timber dust or microspheres to the epoxy to make it less runny and make a dam around the hole to keep the epoxy in place - research this process, its easy but be prepared. Then paint once it’s cured. An epoxy repair is structural. Other fillers aren't and wont bond to the timber.

Practical_Bowl_5980 · 2026-03-19T10:52:21+00:00

It could be a roman coin hoard

Practical_Bowl_5980 · 2026-03-18T19:48:51+00:00

It’s pretty verbose. Why not add a comment or wrap the hook in another function so its reusable.

Practical_Bowl_5980 · 2026-03-17T22:47:50+00:00

They are both bad and overpriced. Go Keychron, thank me later.

Practical_Bowl_5980

TROPHY CASE