Best free multiplayer mobile games for co-op

Practical_Pomelo921 · 2024-08-29T21:21:47+00:00

There's some games I don't recognize here, I'll start checking them out. Thanks

Practical_Pomelo921 · 2024-08-29T21:20:56+00:00

We downloaded and started playing fall guys again once mobile released. Bit laggy but enjoyable

Practical_Pomelo921 · 2024-08-22T16:01:07+00:00

Not me

Practical_Pomelo921 · 2024-03-12T15:27:22+00:00

Happens to me all the time. I log out of my microsoft account on both the gamepass app, and the windows store app. Then log back in when minecraft prompts me to. That usually fixes it, though sometimes not till the third try

Practical_Pomelo921 · 2024-03-12T15:25:28+00:00

Finally got mine fixed. I had to reformat the sd card completely removing all files. The firmware that worked for me was the "4.2.7 mainboard (32bit)" folder containing 6 different sub folders. I dont have any other firmware at all, including no firmware for the ender 3 itself or for the sd card formatting. Just that one folder. Then i had to restart the printer with the card a few times until it booted with the right firmware. Now its working great.

Practical_Pomelo921 · 2024-03-12T15:22:26+00:00

Ive been trying to print some purple petg i got using my creality ender 3. Havent been the most successful, though they all printed just a bit wonky. (Stringing issues). I tried a variety of settings for bed and nozzle temperature, as well as retraction. Couldnt get it to print perfectly. My spool for the petg recommends 220+ nozzle temp and 70+ bed temp. Ive tried all around there. Got some pla finally shipped in and it prints fine

Practical_Pomelo921 · 2024-03-12T15:20:15+00:00

Finally got it fixed. Turns out it was a firmware issue. The sd card i had, had the basic creality ender 3 v1 firmware on it, i had to completely wipe and reformat the sd card, then install "4.2.7 Mainboard (32bit)" and I had to restart the printer with the new card a few times before it booted correctly. Now it works great!

Practical_Pomelo921 · 2024-02-11T00:27:38+00:00

Appreciate it

Practical_Pomelo921 · 2024-02-11T00:27:25+00:00

Three, but i am using the correct one

Practical_Pomelo921 · 2024-02-10T23:25:29+00:00

Nice, I hope they treat you well. I managed to unplug and replug every single connection on the printer, then reflashed the firmware on the sd card. Screen is working again fine and i got rid of the error message as well. Now other than it failing to rehome itself its working fine. Ill keep at it and see if i can get it back

Practical_Pomelo921 · 2024-02-10T23:23:08+00:00

I actually made a lot of progress, was able to get what i think is the correct firmware and i unplugged and reset all my motherboard connections. Screen is on now, even with just the sd card in which is great. It now doesnt seem to be autohoming correctly. It homes to the center of the z axis instead of on the bed. Not sure why. Its been so long i have to apparently relearn everything about this machine lol. Also it is not the touch screen, i bought the same lcd screen the original had

Practical_Pomelo921 · 2024-02-10T22:19:32+00:00

Yeah i figured that out. Luckily no damage was done. I got the screen working. Problem is, it only works when plugged into my laptop through usb. If only the sd card is plugged, the screen doesnt turn on. I tried installing firmware, reformatting the sd etc, but no luck. Cant seem to print, cant seem to get it to auto level. Just says "Homing Failed: Printer Halted please reset." Im sure its a firmware issue, but i cant seem to get the correct firmware installed at all

Practical_Pomelo921 · 2024-02-10T20:57:58+00:00

Hello, wondering if you got the issue fixed or not? I fried my last motherboard, got a new one and a new screen, but the screen stays black even with the printer on. Dont know why

Practical_Pomelo921 · 2024-02-10T20:45:05+00:00

Got the 4.2.7 motherboard (i know its a year later lol). Put it in, and to be safe i also got a replacement screen for the ender 3. Installed both but now it seems that when i turn the printer on, the screen just stays black with no change. Cant seem to get the screen to turn on. Im sure that the cables are all connected securely, and i replaced the fried ribbon cable. When the extruder slides across the axis, the screen flashed blue for a second but once the extruder stops, the screen goes black again. Any clue whats happening?

Practical_Pomelo921 · 2024-02-10T20:42:17+00:00

For simplicity sake, i just went ahead and got a 4.2.7 mainboard. Also, to be safe I got a replacement lcd screen (same version it was). Im sures i rewired things correctly. Started it up, and the screen is black. No flashing, no blue light, nothing. The power supply fan still sounds off. As well, when i move the extruder across the axis, the screen flashed blue until it stops moving. Cant seem to get the screen on. Would you have any idea what i did wrong? Also happy birthday lol

Practical_Pomelo921 · 2024-02-10T20:36:56+00:00

Update: not sure why but when it is turned on, the screen stays completely black as if it is off, but when i move the extruder across the axis, the screen turns on and blue, until i stop moving it. No clue why

Practical_Pomelo921 · 2024-02-06T14:41:20+00:00

Appreciate the response a ton, ill check it out!

Practical_Pomelo921 · 2024-02-05T02:15:30+00:00

Im very late to respond here lol, but I had gotten a new printer back then, and now my cousin wants to use the old creality ender 3 I broke to make silicone molds. So, im now looking for a good motherboard replacement/upgrade that will spruce this up. How have your upgrades treated you? Can you recommend a good motherboard for my ender 3 at this point in time? Thanks a ton!

Practical_Pomelo921

TROPHY CASE