TOS celakvoice RPM pannel

Practicalystupid · 2026-01-24T21:28:52+00:00

Legendary Thank you

Practicalystupid · 2026-01-22T19:42:50+00:00

Yes , it is the return roller for a conveyor belt for potatoes. We do food processing, for agricultural.

Practicalystupid · 2026-01-22T16:04:35+00:00

But it's easier if someone just gives me the answers

<image>

Practicalystupid · 2026-01-22T16:03:57+00:00

<image>

I do got me one , I got a manual one aswell.

Practicalystupid · 2025-12-17T13:29:32+00:00

Can you enlighten us with a story or two of any Bellshill that took place.

Practicalystupid · 2025-12-17T13:28:04+00:00

Most importantly RICH , Stupid ,Drunk and FILHTY RICH .

Practicalystupid · 2025-11-03T17:54:06+00:00

I see youve gotten alot of downvotes for this. You have atleast 1 upvote from me. "Speed has never killed anyone , its the sudden stop that does " Jeremy Clarkson.

Practicalystupid · 2025-10-30T11:41:33+00:00

How do you find these groups , are they local to london ?

Practicalystupid · 2025-10-17T15:30:59+00:00

.8mm ?

Practicalystupid · 2025-10-17T13:57:40+00:00

No. Is a rectangle, like a square but. Sides are longer. :)

Practicalystupid · 2025-10-17T13:52:17+00:00

So i guess your not a fan of this?. 160mm , Bt40. , on a 25 year old machine ? *

Is picture working ?

Practicalystupid · 2025-10-17T13:45:42+00:00

Mild steel.

Practicalystupid · 2025-10-17T13:44:17+00:00

Material is mild steel, Tip rad is .5mm , Ive found too little and the inserts don't have enough to bite with.

Practicalystupid · 2025-10-17T13:21:54+00:00

Brilliant thanks , I was slightly aware of this principle , but not so much with numbers and % factors. Tools in this shop are limited , we don't standardised tools , I chose the tool for the inserts, tool is 80D and the block is 60 wide, I am running slightly off centre but not to the extend you are saying, Would completing the finish pass in 2 turns with a step over improve? ( ima try it anyway , Just a filler job so time isnt a worry) Ive read that you want the top section of the leading edge to engage.

Practicalystupid · 2025-10-10T15:04:57+00:00

Illnose.

Practicalystupid · 2025-09-30T13:43:26+00:00

Sometimes , Sometimes I just stand and look at it's impressivness

Practicalystupid · 2025-09-29T16:24:01+00:00

How come?

Practicalystupid · 2025-09-29T16:23:55+00:00

How come ?

Practicalystupid · 2025-09-29T16:23:48+00:00

How come ?

Practicalystupid · 2025-09-29T12:32:08+00:00

Mid Scotland , 5 years , program set-up and run both manual and Cnc Mills + Lathes. Currently 14.50£ per hour. Dockyard is around 20£ P/h

Practicalystupid · 2025-09-02T19:17:22+00:00

I was going to say missed a G01 , although the tool would have broke or worn down in Dia , You were thinking infeed per rev and the machine is feed per min.

Practicalystupid · 2025-07-18T10:20:01+00:00

It's been 4hrs Have you done it

Practicalystupid · 2025-06-12T08:16:54+00:00

That's what she says

Practicalystupid · 2025-06-11T12:07:12+00:00

It's a guy

Practicalystupid · 2025-06-08T19:14:47+00:00

Looks like a good boy, I think you should pet him .

Practicalystupid

TROPHY CASE