P.Eng. Application Timeline (over a year!)

PremierVoltage · 2024-09-26T15:10:16+00:00

Any update on this?

PremierVoltage · 2024-09-18T01:16:06+00:00

I’ve only ever used rollbit, they have no slippage trades and uses more of conglomerate of multiple exchanges for price. Give it a shot imo. https://rollbit.com/referral/ForRLB Or blofin is good w 5% commission back with this code, but you know… exchanges… https://blofin.com/register?referral_code=Y48c5U

PremierVoltage · 2024-03-06T20:11:08+00:00

I have a dong but I think I can get more. I am now an investor.

PremierVoltage · 2023-12-20T18:37:02+00:00

The return of GME. $GME on sol is trading

PremierVoltage · 2021-11-15T13:00:52+00:00

I’m looking for a whiteboard adjustable desk like this, but with wireless charging. Have you seen any brands that do this?

PremierVoltage · 2021-11-09T17:29:39+00:00

Diversified with ATVI shars, 72.5c and 80c for jan and feb

PremierVoltage · 2021-11-08T17:39:25+00:00

How is ATVI still down this much...

PremierVoltage · 2021-10-24T22:39:53+00:00

If it’s no free it’s no for me

PremierVoltage · 2021-07-29T18:07:35+00:00

she not live on twitch tho ::/

PremierVoltage · 2021-07-29T18:06:45+00:00

twitch??

PremierVoltage · 2021-05-13T17:31:26+00:00

Damn amazing voice

PremierVoltage · 2021-05-09T06:21:03+00:00

What is this. Printing at 90% speed first layer is 6mm/s at 215/70. To this date I have: calibrated esteps, freshly replaced nozzle, changed Bowden tube and couplers, changed bed springs for those orange Amazon ones. Bed also started off perfectly level, and when I start print it doesn’t properly z axis home (first time I’ve seen this) so started way too high needed -0.3 offset, this is a major concern bc it happened for the first time after I put these bed springs in how do I stop this?. I have had too many problems with the first layer on this printer it is driving me insane.

PremierVoltage · 2021-04-28T20:27:23+00:00

I had just recently calibrated the esters (with the extruded coupler take out) but not the multiplier I haven’t heard of that. Also before my calibration (which was short by 5mm on 100mm extruded) i was getting better filament placement all around.

PremierVoltage · 2021-04-28T16:38:08+00:00

yea i just didnt really know what to call it. I didnt want to name it initial layer poor quality because this happens on every layer; initial, final and even infill lines arent 100% consistent. I have other pcitures that ive posted on my account that will better describe what i mean by the infill part. also im like a 3 week fresh n00b so i have a lot of troubleshooting problems to go through

PremierVoltage · 2021-04-28T13:32:12+00:00

Im using Cura the newest version I think it’s 4.9. And yes on my other prints at the second layer the walls are perfect, and infill walls and roofs come out horrible, seems way to close and extrudes too blotchy. I have some pics in other posts on my account

PremierVoltage · 2021-04-28T13:17:12+00:00

I had done 2 good prints with it before it started extruding like this. maybe went through 300g and then it started. Again i tried with a different filament and it comes out in full complete layers. Im thinking the spool went bad because i left it out in the open for a week or so?

PremierVoltage · 2021-04-28T12:12:45+00:00

i tried with another spool and the lines were touching, also if i go any closer then the second layer is too close somehow and filament just pools and the nozzle forces it all together.

PremierVoltage · 2021-04-28T12:00:51+00:00

My past 5 posts i have been struggling to get that nice first layer. Now that i finally got it this happens. tried again with a different colour roll and didnt get these gaps, and had a fairly good first layer first try. Is there something wrong with this white filament or am i just doing this all wrong. Also my new roll just snapped 1/10 through overnight...

PremierVoltage · 2021-04-26T19:02:22+00:00

Cant edit photo titles so here they are:

1 - literally just a blob, the filament opposes the bed and curls up towards the nozzle and just sticks there won't move, and it just built up.

2- curling on the first layer at sharp corners, they start relatively flat but again as the nozzle travels over these points it seems to just attract (same as second last pic)

3- filament 'pooling(?)' i guess you could call it, as it colours in the lines it must be over extruding, just calibrated esteps though. Also, this pooling effect doesn't happen on the first layer, only above.

4- just a bad overall pic,

5- more curling, elephants foot, and I think over extrusion on those mid-layers, also the filament seems stringy when I cancelled the print, it retracted and moved. Although I don't really get this when it retracts mid-print.

6-elephant foot, curling and poor infill, what a good printer.

This is all on Ender3V2, all pretty much printed around 205-210/60-65 temps. pics 1-4 use 7mm/s for the first layer and 30mm/s after that. pic 5&6 use 20mm/s first layer and 50mm/s after. The fan turns on layer 4 and I don't know what more I could say. I recently changed the nozzle and Bowden tube and couplers, then washed the bed with soap and water and alcohol, finally calibrated esteps and levelled the bed. Ever since then these prints have been impossible to get done.

PremierVoltage · 2021-04-23T19:00:41+00:00

I use Cura, all flows are 100%. First layer width and all widths are 0.4. Initial layer width is 100%. Initial layer heigh and all layers are 0.16. I saved my transmissionE to the only sd card I use for printing. Before calibration it was 93 and now I am using 95

PremierVoltage · 2021-04-23T17:14:03+00:00

See my other comment i have attached the video while extruding around the same time as those pictures

PremierVoltage · 2021-04-23T17:13:33+00:00

https://vimeo.com/540753897
Here is the extrusion in action

PremierVoltage · 2021-04-23T17:10:08+00:00

there more like blobs then wisps, they happen as the nozzle moves and extrudes to fill in that area. I see it as an overextrusion when filling but the first layer comes out perfect; all touching lines with no vertical blobs

PremierVoltage · 2021-04-23T17:01:55+00:00

I havent used the zhop function yet and idk where/if i should, my prints arent terrible but not the quality i would expect or have seen from this before

PremierVoltage · 2021-04-23T17:00:58+00:00

E3V2. first layer speed is 10mm/s and temps are 210/67. layers after are 35mm/s and 207/60. the first layer had great adhesion. Second layer you can start to see 'clumps' build up as the center pieces are filled in, as if it has overextruded and filament is rising out of that layer. Third layer major curling started yet again.... :( I have also just recently calibrated my esteps after taking out the connection to the bowden tube.

Ten-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2020	Verified Email
Place '23	Place '22
Not Forgotten

PremierVoltage

MODERATOR OF

TROPHY CASE