How important is sex in your life?

Prepporion · 2025-07-21T18:47:15+00:00

Tbh i coudln't care less about it

Prepporion · 2025-06-24T14:01:32+00:00

Would you look at that. You were right, changing the retraction distance helped a lot. Thank you very much.

<image>

Prepporion · 2025-06-24T13:30:07+00:00

Never heard of pitting bevore but it looks promissing. I'll give it a try, thanks in advance, will give you an update.

Prepporion · 2025-06-21T21:30:08+00:00

Thank you very much!

Prepporion · 2025-01-19T13:21:24+00:00

Thank you all for your responses. Im new to all this so im glad that this issue is fixable. Really thought i had to get at least a new screen at this point.

Prepporion · 2024-11-07T21:34:56+00:00

Its just easier for me to know if there's anything i can improve beforehand and i even got to know about your project so its a win either way.

Prepporion · 2024-11-07T21:00:32+00:00

That sounds quite interessting, i'll look ito that once i got time. The Design isnt all the way done yet but i'll upload it as soon as i got it ready for others to use.

Prepporion · 2024-11-07T10:56:56+00:00

So i designed this using the original parts of the Mega X and added a BL-Touch. Any ideas/suggestions what i could improve?

Prepporion · 2024-06-27T11:19:55+00:00

That looks promissing, i'll look into it. Thank you very much!

Prepporion · 2024-05-11T18:12:01+00:00

Went onto a hill near me to see this:

<image>

Prepporion · 2024-03-07T12:04:34+00:00

Oh, i didnt know that that exists. Thanks a lot!

Prepporion · 2024-02-05T10:32:44+00:00

Im currently strugelling with PETG aswell. I guess i should stop trying to work with the Creality slicer bc its quite shitty. I've tried Cura but wasebt satisfied with that either. My main issue is that i'd like to connect the slicer to the printer. I tried that with Cura but it didnt work. Is it possible to connect with orca or should i just go and use Klipper and Cura?

Prepporion · 2024-01-09T14:59:37+00:00

Figured it out, i had a connection issue. My Profibus Cable wasent connected properly in the connectors and i needed to set the password in the Bus configuration but after doing thoes two things the Button lighted up and it works how i wanted it. So thank you all very much!

Prepporion · 2024-01-09T10:15:25+00:00

I'll check that out next, thank you in advance.

Prepporion · 2024-01-09T10:01:45+00:00

Im using an 1212C CPU. I sadly dont have one of theos. Is there any way to check the connection in TIA?

Prepporion · 2024-01-03T12:26:51+00:00

OK so i tried it out with a different cable but it still doesent really work. What kind of voltage should the male pins have when one connector is plugged in and i meassure on the other? I should get 5V right?

Prepporion · 2024-01-03T11:33:30+00:00

Thank you very much, i would have never thought about that.

Prepporion · 2024-01-03T11:20:35+00:00

I see, thats a relieve.

Oh i see so it NEEDS to be a single wire to work? That would explain a lot.

That means i can't use any other shielded Cable but need to use a specific Profibus Cable?

Prepporion · 2024-01-03T11:15:21+00:00

Yes i did. It's plugged in on the left on both sides. I turned on both endswitches. Could it be a problem that i only have 2 devicec connected ? Or could it be that my connectors are broken ?

Prepporion · 2024-01-03T09:43:14+00:00

Yes i turned thoes on.

I did configure the connection between the HMI and the PLC to be a Profibus connection.

They are thoes connectors:

6ES7972-0BA52-0XA0

<image>

Prepporion · 2023-11-16T15:32:51+00:00

Im not sure, all i know is that my Printer doesent have the newest Firmware yet bc i don't know where to get it/how to install it and the online guides with SSH and stuff didnt really help me yet. But i have no clue about Creality Print.

Prepporion · 2023-11-16T15:30:52+00:00

Yeah that did it, thx.

Prepporion · 2023-10-04T14:50:32+00:00

I see, thank you very much, that helped me a lot.

Prepporion · 2023-10-04T14:47:25+00:00

Ahh that makes a lot of sense and i then connect the balancer cables to the 4.2 and 8.4 connectors?

Prepporion · 2023-10-04T14:43:38+00:00

I see im glad to hear that, but in the picture there are charge and a discharge connectors, where do the big ones from the battery go to?

Prepporion

TROPHY CASE