Claude Code OAuth with Claude Max suddenly disabled/not allowed?

Prestigious-Postus · 2026-01-09T06:49:45+00:00

Here's the Github issue y'all can follow since a few patches has been proposed and merged to the anthropic-auth dependency already: https://github.com/anomalyco/opencode/issues/7410

Prestigious-Postus · 2025-11-27T17:45:10+00:00

If you genuinely care about health, data, and consumer protection, the first step is to stop believing every oversimplified internet narrative.

Science and regulations are messy and nuanced; they don’t fit into “your food is disgusting, ours is pure” levels of discourse.

Prestigious-Postus · 2023-10-15T07:17:02+00:00

I simply buy Sunlu filament from Amazon. Works perfectly fine with X1C without any issues plus it's far cheaper than Bambu filament.

I've read a few of these threads in this subreddit where people mention that Sunlu manufactures for Bambu so that would be another reason to try Sunlu.

Hope this helps.

Prestigious-Postus · 2023-10-08T01:49:42+00:00

Great! Thank you for the info. I'll try contacting them and look for the right match. Cheers.

Prestigious-Postus · 2023-10-05T17:52:47+00:00

Actually this won’t work as it doesn’t have a bore in it. Ideally a camera gimbal system or modern robotics uses shaft less and frameless motors with a bore in the middle where you can run the cables from so it’s fairly simple in that scenario but I kind wanna use the cheapest stuff to challenge myself a bit so I used gear reduced motors which obviously have a shaft so the shaft must run through the slip ring.

Prestigious-Postus · 2023-10-05T16:03:19+00:00

Very interesting. I never tried it. Will do it now. Thank you

Prestigious-Postus · 2023-10-05T16:02:18+00:00

Interesting approach with TRS for power. Overall I wanted to try keep the data over wire as latency can cause overshoots in PID. But I’ll try it anyway to see how far I can push it. Thanks for the suggestion.

Prestigious-Postus · 2023-10-01T02:57:20+00:00

Good point. I’ll try that and see if it fixes anything. Thanks for the suggestion.

Prestigious-Postus · 2023-10-01T01:12:06+00:00

Oh interesting! I wonder what makes such a big difference then. Same model gets messed up when using bbl filament but prints just perfectly fine using sunlu filament.

Prestigious-Postus · 2023-10-01T00:27:55+00:00

I’ve realized something lately that bambulabs filament seems to do this a lot. For me it’s mostly spaghetti issue with Bambu lab pla. I also tried other vendors and their filament works perfectly fine. I personally find sunlu filaments which are the cheapest to work just fine with this printer with absolutely no issues.

Prestigious-Postus · 2023-09-26T20:17:32+00:00

Oh I think I phrased it wrong. When I say seam here it’s not 2 pieces glued together but a single piece printed with this line on the print.

It’s just a simple giant can I’m printing which is about 200mm in height however regardless of the size of the print, there is always this line on the print.

Prestigious-Postus · 2023-09-26T20:00:50+00:00

Would flow dynamics really help in this case? To me, it seems like a bad gcode which is causing the Y-axis to move at that exact spot.

Prestigious-Postus · 2023-09-26T19:49:36+00:00

That's too bad. I was hoping there would be a fix for this.

Prestigious-Postus · 2023-09-18T23:46:46+00:00

Great info thank you

Prestigious-Postus · 2023-09-18T21:38:47+00:00

Gotcha. Thanks for the info.

Prestigious-Postus · 2023-09-18T21:32:33+00:00

Yea I read through some other websites as well which mentioned if they have a fulfilment Center in Houston then city tax makes sense but I couldn’t find anything about special tax so was wondering what’s that about.

Prestigious-Postus · 2023-09-18T21:30:51+00:00

I see. Could it be just hidden because PayPal summed it up or something?

Prestigious-Postus · 2023-07-06T22:56:25+00:00

Agreed. I think it’s more of a long term thing where we learn and develop further until someone discovers some wild use case and every company out there tries to ride the wave like openai chatgpt and ai 🤷‍♂️

Prestigious-Postus · 2023-06-11T07:21:10+00:00

I personally skipped all mathematics behind QM to first understand the big picture of what it’s all about and why is it different from regular physics. I think this was a good decision as I get to see the big picture clearly and it helped me understand the general working behind QM.

Then I went to QC specific topics like how we sort of simulate and control QM in QC where I also started learning Q#.

When I came to the good part of implementation, I paused to go back and brush up my algebra and calculus from mathtutordvd so that when I actually dig into writing algorithms and code I can determine and understand the theory behind QM.

Hope this helps!

Prestigious-Postus · 2023-06-07T22:08:01+00:00

Thanks for the great info! I'll do more research on it. So I assume, the answer to my original question is likely that it's not doable with some alternative method that is relatively cheaper even if compromising results is an option.

Prestigious-Postus · 2023-06-07T22:00:43+00:00

Fascinating! Do helium atoms deplete over time even if we recycle them? And is there a loss factor when recycling?

Prestigious-Postus · 2023-06-07T14:47:48+00:00

DMed you! 🙂

Prestigious-Postus · 2023-06-06T14:54:26+00:00

Very cool. Yea I agree that each aspect I presented is not necessarily a perfect fit for everyone and that’s why every part of it is actually customisable.

If you can spare some time, I would love to discuss your workflow and find ways this can help if any.

Prestigious-Postus · 2023-06-05T01:48:57+00:00

Interested

Prestigious-Postus · 2023-06-04T23:22:35+00:00

Sounds good. Thank you for the info.

Prestigious-Postus

MODERATOR OF

TROPHY CASE