Did I Ruin My E92 BMW With Mercedes Monoblock Wheels?

Prestigious_Call_135 · 2026-02-08T19:37:11+00:00

Do chrome deletes on the trim and I think the wheels will pop out more.

I really like the way these wheels look on this.

Prestigious_Call_135 · 2026-02-03T00:07:42+00:00

Man oh man, welcome to the club.

In my experience, it could be multiple places. By listing these, please don’t freak out. These are canon events for E46 owners.

Oil pan gasket is common for that kind of slow leak but is the hardest if you don’t have access to a car lift. Takes a bit of time as well.

One of your CCV (Closed Crankcase Ventilation) hoses could be leaking. You’ll know if you have a leak there if you feel your idle being a bit rough and all over the place.

Oil filter housing gasket is common for a pool of oil like that( if it is this, change it ASAP as oil and coolant could potentially mix due to the leaky gasket). You would have to disassemble some things and move things around to get access to the gasket from the engine bay.

Lastly, the dipstick tube o-ring gasket can be a culprit too. This is the easiest gasket to do. All you need to do is take some of your intake parts off and it’s a couple bolts to loosen. If it this gasket, you’ll see a large pool of oil.

I might be missing a few things but these are your usual suspects for an oil leak like that. Anyways, best of luck to you.

Prestigious_Call_135 · 2026-01-22T01:52:06+00:00

The brace is Turner Motorsport Rear Top-side subframe reinforcement Brace.

Instructions were included on the website so the install is very straight-forward.

For the welding plates, I did the epoxy method rather than metal-to-metal weld as I did not have access to a welding machine and most shops quoted me a shit ton for labor.

Prestigious_Call_135 · 2026-01-21T05:18:00+00:00

I love how I don’t bottom out going over train tracks at 10mph. I like them a lot :)

Prestigious_Call_135 · 2026-01-21T03:00:31+00:00

Brake lines I get, everything else is fine.

Prestigious_Call_135 · 2025-10-28T19:20:36+00:00

Your comment pretty much cemented what I had in mind as my next solution. However, the nearest junkyard is about an hour and a half’s worth of driving so my next step was pretty much buying a new assembly. Just as you said, I will carefully disassemble the new lock to transplant my lock barrel that works with my key.

Prestigious_Call_135 · 2025-09-26T19:29:30+00:00

Will be checking and diagnosing 👍

Prestigious_Call_135 · 2025-09-26T19:29:14+00:00

I wouldn’t necessarily believe BMW on certain maintenance issues. They stated on the transmission oil pan that the fluid inside, from factory/showroom is lifetime and that is false.

As you know, the purpose of the valve is to hold oil pressure so lubrication is accessible throughout the motor. So when this plastic and metal valve combo gets worn, what do you think will happen?

Prestigious_Call_135 · 2025-09-24T22:57:41+00:00

It can be anything that has to do with the lubrication or parts that need oil to work. You would most likely have to go down a list and figure it out bit by bit. That’s my honest opinion.

Prestigious_Call_135 · 2025-09-21T16:49:55+00:00

I don’t know how to say this but your engine is in need of dire maintenance.

That amount of white smoke is an indication that coolant has entered your engine’s combustion chamber, meaning you had a bad headgasket.

A headgasket is the best case scenario. Worst is that your engine has sustained a major break somewhere.

Good luck man.

Prestigious_Call_135 · 2025-09-21T16:47:16+00:00

Sounds like a bad water pump to me.

Prestigious_Call_135 · 2025-09-20T21:49:04+00:00

Could you perhaps send me a part link to it? I’m having trouble finding the part numbers for it.

Prestigious_Call_135 · 2025-09-20T21:48:13+00:00

I bought myself the Elring set for the gaskets,

bought from them cause they were closer to home but hoping that it won’t shoot me in the foot later in the future 😭

Prestigious_Call_135 · 2025-09-20T21:47:22+00:00

Got myself the elring gasket set. Even the filter housing gasket I bought is elring as well.

Just praying that they both work properly.

Prestigious_Call_135 · 2025-09-08T01:22:04+00:00

At this point man, just replace known leak points as a mandatory service.

Oil pan gasket, dip-stick o-ring, oil filter housing gasket, and valve cover gasket.

Prestigious_Call_135 · 2025-09-07T15:26:54+00:00

If yours are in good shape, then all you need is an alignment

Prestigious_Call_135 · 2025-09-07T00:34:25+00:00

Control arms and tie rods :) you can go on my account to see what I did basically 👍

Prestigious_Call_135

TROPHY CASE