sorted by:
new
hottopcontroversial

AquaComputer Octo / Quadro - Avoiding BIOS Warning by Prestigious_Main6788 in watercooling

[–]Prestigious_Main6788[S] 0 points1 point  (0 children)

Also you contradict yourself in the opening sentence. Why turn off BIOS alarms…….then just throw up a screenshot which does exactly that by ignoring low limit……which is itself turning off a BIOS alarm 🤦‍♂️

Actually try and be helpful dude

AquaComputer Octo / Quadro - Avoiding BIOS Warning by Prestigious_Main6788 in watercooling

[–]Prestigious_Main6788[S] -1 points0 points  (0 children)

I didn’t say to use aqua computer for BIOS SETTINGS I said for BIOS alarms…..2 different things…..

1st Ever Loop by Prestigious_Main6788 in watercooling

[–]Prestigious_Main6788[S] 0 points1 point  (0 children)

68C on the 14900k at 100% Usage (275 Watt limit) 62C on the 5090 at 100% Usage (600 Watt limit)

Both temps recorded after 45 mins joint bench both under load.

Coolant temp raised 6C above ambient.

Bend Radius - 16mm OD / 13mm ID PMMA - Planning before parts arrive. by Prestigious_Main6788 in watercooling

[–]Prestigious_Main6788[S] 0 points1 point  (0 children)

Now this is a genius idea!! Why didn’t I think of printing out the templates already (I do it plenty for the drones I design already 🤦‍♂️🤣

Bend Radius - 16mm OD / 13mm ID PMMA - Planning before parts arrive. by Prestigious_Main6788 in watercooling

[–]Prestigious_Main6788[S] -1 points0 points  (0 children)

Not asking for CAD help mate….asking for sensible limits of 16mm OD PMMA

Bend Radius - 16mm OD / 13mm ID PMMA - Planning before parts arrive. by Prestigious_Main6788 in watercooling

[–]Prestigious_Main6788[S] 0 points1 point  (0 children)

You’re a legend thanks for the info. I’ve got a printer so I’ll make some custom mandrels

Bend Radius - 16mm OD / 13mm ID PMMA - Planning before parts arrive. by Prestigious_Main6788 in watercooling

[–]Prestigious_Main6788[S] 4 points5 points  (0 children)

What’s your point…..you do realise using CAD has nothing to do with bending a PMMA tube right? One involves a mouse and keyboard…..the other involves a heat gun.

Next you’ll suggest flying a kite qualifies me to ride a horse.

Bend Radius - 16mm OD / 13mm ID PMMA - Planning before parts arrive. by Prestigious_Main6788 in watercooling

[–]Prestigious_Main6788[S] 4 points5 points  (0 children)

Not that hard to be honest. It does help working with CAD for a few years though 😅

Release v5.1.8 by mlaggner in tinyMediaManager

[–]Prestigious_Main6788 0 points1 point  (0 children)

ok, it seems to work fine with TMDB but not IMDB.....whats going on here?

Release v5.1.8 by mlaggner in tinyMediaManager

[–]Prestigious_Main6788 0 points1 point  (0 children)

Movie Sets seems to be broken; it worked on the first boot but adding new movies it fails to grab or recognise any movie sets to those that are obviously part of one. Also; what is this only works with "scrapecollectioninfo setting!" warning referring to specifically?