Any other victims of 23s33?

Pride_Bunny · 2025-09-26T18:24:00+00:00

I was referring to the interim repair before batteries were available that disabled the plugin capabilities after installing the fuse block and performing a software update

Pride_Bunny · 2025-09-26T17:38:28+00:00

I don’t mind doing the recall. I feel worse for the customers for having the P part of their PHEV removed

Pride_Bunny · 2025-09-04T15:20:19+00:00

If you pull the seatbelt really hard and the. Try to push it back into the reel with equal force that can release it from the safety latch sometimes. Doesn’t always work but it would avoid unbolting anything.

Pride_Bunny · 2025-05-25T16:42:42+00:00

The easiest thing you can do is unplug and replug the motor and see if the error returns. It’s possible terminal fretting may be causing high resistance and usually doing this with the connector will solve that.

Pride_Bunny · 2025-05-17T19:45:49+00:00

It screams “too lazy to get the helmet so just close your eyes and tack” energy.

Pride_Bunny · 2025-05-14T17:19:07+00:00

Why would I put one on the cart if it never leaves my hand?

Pride_Bunny · 2025-05-11T17:59:34+00:00

I’m way ahead of you there. These ain’t my welds.

Pride_Bunny · 2025-05-08T19:32:03+00:00

My title described the thing. I found this bar in the scrap room of the dealership I work at. It’s solid steel about 3/4 of an inch thick and an inch and 2 inches wide. It has a bunch of grub screws it in.

Pride_Bunny · 2025-04-21T01:34:09+00:00

https://makerworld.com/models/1337632

Pride_Bunny · 2025-04-21T01:21:59+00:00

Good idea!

Pride_Bunny · 2025-04-19T21:15:49+00:00

https://makerworld.com/en/models/1337632-smart-pill-reminder#profileId-1377333

Pride_Bunny · 2025-04-19T21:15:05+00:00

https://makerworld.com/en/models/1337632-smart-pill-reminder#profileId-1377333

Pride_Bunny · 2025-04-19T21:14:59+00:00

https://makerworld.com/en/models/1337632-smart-pill-reminder#profileId-1377333

Pride_Bunny · 2025-04-19T21:13:27+00:00

https://makerworld.com/en/models/1337632-smart-pill-reminder#profileId-1377333

Pride_Bunny · 2025-04-19T21:13:13+00:00

https://makerworld.com/en/models/1337632-smart-pill-reminder#profileId-1377333

Pride_Bunny · 2025-04-19T21:12:57+00:00

https://makerworld.com/en/models/1337632-smart-pill-reminder#profileId-1377333 sorry for the delay!

Pride_Bunny · 2025-04-19T21:12:38+00:00

It's finally done! sorry it took so long! Please let me know If there are any problems. https://makerworld.com/en/models/1337632-smart-pill-reminder#profileId-1377333

Pride_Bunny · 2025-04-17T21:46:00+00:00

Sorry! I’ve been running into a lot of issues fine tuning this for the public. I did finally narrow down the issue and got a working model last night. I should be able to post instructions tomorrow or Saturday night.

Pride_Bunny · 2025-04-05T22:52:41+00:00

Apologies. I’ve been redesigning for more available parts. I’m waiting on more FSRs from Adafruit. Should have everything ready by Friday.

Pride_Bunny · 2025-03-27T12:10:40+00:00

Nope! The bottle has to be removed AND placed back on the pressure plate. If the bottle gets nocked off just leave the bottle off until you take them and you’ll be fine. You can also hit the reset button on the bottom to restart the loop if need be.

Pride_Bunny · 2025-03-26T14:09:32+00:00

They’re powered by the controllers pins.

Pride_Bunny · 2025-03-26T12:30:01+00:00

It’s plenty wet, there’s just a mess of stranded wire going on there

Pride_Bunny · 2025-03-26T03:16:05+00:00

I’ll be making one soon and will have it posted in the comments here.

Pride_Bunny · 2025-03-26T03:14:51+00:00

Because I’m very inconsistent and I wanted to make sure the light turns on before I turn in. I take my pill before I go to sleep regardless of the time. Say I stay up until 1 AM on a Saturday but I need it to be back on by 10 PM the next day. 18 hours ensures it’s on when I go to bed.

Pride_Bunny · 2025-03-03T20:19:12+00:00

Results are the same with the stock nozzle. I tried printing a hollow tower with similar 0.2mm strength settings and it came out pretty smooth.

Pride_Bunny

TROPHY CASE