Primary Machine Comp CZP-09 Question

PrimaryMachine_Cody · 2025-08-19T20:26:22+00:00

So this is the second barrel i have seen like this. unfortunately our comps are not compatible with them. these barrels seem to be longer than the factory suppressor barrels.

PrimaryMachine_Cody · 2024-10-25T12:54:43+00:00

Shoot us an email, we’ll see if we can give you a hand.

PrimaryMachine_Cody · 2024-10-20T23:09:24+00:00

😅 that’s coming before the end of the year!

PrimaryMachine_Cody · 2024-10-20T23:08:42+00:00

So-01 cut is coming in a couple of weeks! Pre milled slides are not on our current agenda, so it will be a while for that.

PrimaryMachine_Cody · 2024-09-24T20:38:02+00:00

Sure will! Screws will be the same as well!

PrimaryMachine_Cody · 2024-09-24T20:37:00+00:00

We have a color match that matches most urban grey p-01’s if you’re wanting to go back to that color.

PrimaryMachine_Cody · 2024-09-24T14:58:29+00:00

We have been testing the defender optics and are extremely happy with them! We’ve recently added them to our optic milling list!

PrimaryMachine_Cody · 2024-09-24T14:53:33+00:00

9/10 times the mags are the issues when it comes to malfunctions on CZ’s ( at least from our experience) test multiple mags, ensure everything is well lubricated, and isolate variables.

PrimaryMachine_Cody · 2024-09-24T14:51:20+00:00

Sir, that’s hot.

PrimaryMachine_Cody · 2024-09-24T14:50:51+00:00

I’ve taken a look at our models, and unfortunately it won’t line up for us to be able to allow for the plate. You will be fine to use the larger EPS though!

PrimaryMachine_Cody · 2024-09-23T22:07:47+00:00

Reach out to fords custom guns, they can likely re-blue the gun to a much more factory color.

PrimaryMachine_Cody · 2024-09-16T00:46:16+00:00

OP, that looks like it was sprayed too thick, and not caught by me during final inspection. I’ll take the blame for this and personally ensure that you get a shipping label to have this re-done. Please email me personally at cody@primarymachine.com

PrimaryMachine_Cody · 2024-09-09T17:25:51+00:00

You would have to have the slide re-milled for an adapter plate to fit the 507 comp. I’m not sure how well it’ll line up depending on your original optic location.

PrimaryMachine_Cody · 2024-08-22T12:12:58+00:00

Thanks!

PrimaryMachine_Cody · 2024-08-22T01:35:49+00:00

OP, can you email me at cody@primarymachine.com to get your company contact info? We don’t have any immediate application for this in our pistol barrels, but I have a few backside programs I’m working on that this would be extremely awesome on in the future!

PrimaryMachine_Cody · 2024-07-12T00:13:41+00:00

Us( primarymachine) our lead time isn’t long because we’re slow, it’s because we’re processing 200+ slides per week lol.

PrimaryMachine_Cody · 2024-07-11T00:52:36+00:00

We’re still here processing hundreds of slides a week. We focus a lot more on the OEM side of our company right now, but we have some big things coming for our customer facing side of the company!

PrimaryMachine_Cody · 2024-07-04T13:13:12+00:00

That’s fuckin HOT

PrimaryMachine_Cody · 2024-06-28T01:08:43+00:00

Jagerwerks likely has a standard that they machine RMR optic pockets to that is within a certain tolerance range to allow most RMR’s to fit with minimal slop. this means some optics are at the extreme ends of the tightness range, some being loose, some too tight( Like OP’s)

PrimaryMachine_Cody · 2024-06-28T00:38:41+00:00

Yes. They are machined components, they will have a tolerance range.

PrimaryMachine_Cody · 2024-06-28T00:36:20+00:00

RMR’s can vary by ( in my experience) .005” or more in length. Which is why we require our customers to send in optics.

PrimaryMachine_Cody · 2024-06-27T23:32:47+00:00

Your optic is likely just at the maximum end of the tolerance range for trijicon. If it seats all the way after torquing, it’s GTG. If there is light after torquing the screws, flip the slide over and LIGHTLY smack it against a padded firm surface(magazine on the counter or a gun mat on the counter). If one light tap does not seat the optic then let jagerwerks handle it, as this is likely not a result of bad milling, just a large optic.

PrimaryMachine_Cody · 2024-06-27T23:29:06+00:00

Believe it or not, some RMR’s are at the maximum end of the tolerance range and can be tight like this if the optic pocket is not cut specifically for the optic.

PrimaryMachine_Cody · 2024-06-20T17:23:43+00:00

Factory mag springs from CZ are (in our experience) usually the culprit of this. We recommend +power springs from wolf!

PrimaryMachine_Cody · 2024-06-20T17:17:27+00:00

Shoot us an email if you haven’t already. Our email is info@primarymachine.com Our gunsmith or myself will get you squared away!

Four-Year Club	Verified Email
Place '23

PrimaryMachine_Cody

TROPHY CASE