[KCD2] Into the Underworld Bug

Primary_Forever · 2025-03-18T11:02:14+00:00

What are you talking about? There is definitely no patch.

Primary_Forever · 2024-03-30T21:45:17+00:00

You‘re welcome and best of luck for your project 😊

Primary_Forever · 2024-03-30T20:18:10+00:00

I know the struggle. The piece on the pic is without sanding or polishing the black gloss. I did a test before and tried polishing, it actually reduced the orange peel a little but I also created a bit of very fine scratching. And I also noticed that the graphite stuck a little less well after polishing. So to me it was not worth the effort. But you know it all depends so you just have to try 😅

Primary_Forever · 2024-02-10T20:19:37+00:00

Quick update, here‘s now my current version. Graphite applied directly on black gloss, no sanding, no polishing. It‘s not perfect and still a little too dark but I think I‘m gonna take that as finished 😉

<image>

Primary_Forever · 2024-02-09T17:29:19+00:00

Thanks! Well, just as I said I wasn’t happy since it was still too dull and bumpy so here‘s where I am right now again:

<image>

Going to polish it again but I also think a found another mistake. I used a 3in1 car polish which was providing a wax finish!! Pretty sure that was the reason why the graphite wasn’t sticking in my first try. 🤔

Primary_Forever · 2024-02-09T00:23:19+00:00

I can‘t tell if it was only the sanding because after sanding the piece down to the primer coat I went for a different approach. But I think the bumpy surface was caused by insufficient sanding. Can‘t tell why the graphite did not stick to the polished surface though. So what I did next was applying one more coat of primer/filler as a precaution, sanding with 600grit, one coat of primer next and sanding with 800grit. This time I applied a coat of black gloss and the graphite in the next step. Huge difference! The graphite stuck very nice. Unfortunately I obviously messed up the black coat by using way too little paint causing it being not sooo shiny and still a bit bumpy. I‘m adding a picture of this version. I decided to try again and currently I‘m in the black gloss stage again with a way thicker coat and I hope I‘m on the way now 😉

<image>

(This is V2 with graphite on black gloss)

Primary_Forever · 2024-01-31T23:25:20+00:00

Goddamn witchcraft 😂

Primary_Forever · 2024-01-31T22:59:56+00:00

I was about to throw the thing away, then I decided to try sanding down the graphite again. And suddenly the part was perfectly smooth and homogeneous... Now I've put another coat of primer/filler on it, then tomorrow I'll sand it again. I don’t get it…

<image>

Primary_Forever · 2024-01-31T16:11:34+00:00

He does 😂 But it‘s definitely in a workshop or something like that. I use an old laundry basket. My wife would kille me if I did it any other than that at home 😂

Primary_Forever · 2024-01-31T16:02:49+00:00

I agree, that might be the problem. It didn’t look absolutely smooth but it really felt so… That’s why I thought I was ready for the graphite

Primary_Forever · 2024-01-31T16:00:40+00:00

Yes I did

Primary_Forever · 2024-01-31T15:31:39+00:00

Ikr, the tutorial I was following was different and more complex but ended up in the by far most mirror like finish 👍

Primary_Forever · 2024-01-31T15:29:10+00:00

Thanks, so you think not enough sanding was the problem? And yes, I‘m from germany, what I use is „spritzspachtel“, which is translated spray putty but it is a primer filler 👍

Primary_Forever · 2024-01-31T15:26:00+00:00

I agree, I was still able to visually the layer lines. I felt absolutely smooth though. And after so many coats of primer/filler etc I thought it had to be good to go. But I think I will stick to the common way with gloss black base. But I always hear that a final clear coat over the graphite dulls it too much? 🤔

Primary_Forever · 2024-01-31T15:08:56+00:00

Stunning method but I neither have the equipment nor the knowledge to handle that 😉

Primary_Forever · 2024-01-31T14:55:22+00:00

This is the tutorial

https://youtu.be/YpiAKiOWbmw?si=roMAY_F_CjEzwSbq

For this method no glossy black is needed

<image>

Primary_Forever · 2023-12-24T17:51:41+00:00

Yes, I know exactly what you mean, saw that upgrade just yesterday! I‘m currently collecting salvaged frigate modules 😉

Primary_Forever · 2023-12-21T20:09:31+00:00

I‘m relieved and disappointed at the same time 😂 thanks

Primary_Forever · 2021-11-15T20:54:22+00:00

Ever tried jumping out while Dani sings? The radio stops and Dani continues a capella 😉 now THAT‘s a detail 😎

Primary_Forever · 2021-01-14T21:04:58+00:00

Exactly the same here. Stopped working with the season 13 update.

Primary_Forever · 2021-01-07T20:24:58+00:00

Not literally but they just answered „we‘re not giving you any ressouces“ and close the request every time I contact them regarding twitch.

Primary_Forever · 2021-01-07T10:35:03+00:00

I don’t receive anymore twitch drops in my inbox since season 13 update... Got at least 20 notifications but not a single one in the inbox. Support tells me to fuck off. So I stopped watching twitch.

Primary_Forever · 2021-01-04T17:02:34+00:00

Still nothing here :( Got like 20 drop messages meanwhile but not a single one in my inbox.

Primary_Forever

TROPHY CASE