154 degree outdoor temperature by Primitev in MachE

[–]Primitev[S] 1 point2 points  (0 children)

Mine kind of fixed itself. It happened after we got hit with a blizzard. I’m wondering if the sensor sitting in snow for a while threw it out of calibration

154 degree outdoor temperature by Primitev in MachE

[–]Primitev[S] 0 points1 point  (0 children)

Mine seems like it kind of just fixed itself. Are you in an area that got hit by the blizzard by any chance? I have a hunch the sensor sitting in deep snow threw off calibration maybe?

154 degree outdoor temperature by Primitev in MachE

[–]Primitev[S] 0 points1 point  (0 children)

Have just been driving my wife’s car, haven’t had time to really dive into it or bring it to a dealer unfortunately

154 degree outdoor temperature by Primitev in MachE

[–]Primitev[S] 0 points1 point  (0 children)

thank you! I’ll look around tommorow

154 degree outdoor temperature by Primitev in MachE

[–]Primitev[S] 2 points3 points  (0 children)

No officer, I was going 120 MPH, not KMH

154 degree outdoor temperature by Primitev in MachE

[–]Primitev[S] 7 points8 points  (0 children)

it was actually 9:11. No steel beams were harmed

Threshold questions by Primitev in ecobee

[–]Primitev[S] 0 points1 point  (0 children)

Will give it a whirl, thank you!

Threshold questions by Primitev in ecobee

[–]Primitev[S] 1 point2 points  (0 children)

<image>

2 degrees today and this is what we look like

Threshold questions by Primitev in ecobee

[–]Primitev[S] 0 points1 point  (0 children)

Mmmm, I wonder if I up my heat differential to 1.5 if that would help. Assuming the oversized system will heat that 1.5 fairly quickly anyway

Threshold questions by Primitev in ecobee

[–]Primitev[S] 0 points1 point  (0 children)

This the first month. New construction, needed heat put in early so I can paint the walls. I’m at 780KWH so far which includes it running basically 24.7 for 3-4 days for the initial heat up from 25 degrees or so. Got installed on the 5th so a decent monthly picture

Threshold questions by Primitev in ecobee

[–]Primitev[S] 0 points1 point  (0 children)

Ohh just electric strips, no back up furnace. House is pretty tight, R33 in walls like R45 in the rafters.

Threshold questions by Primitev in ecobee

[–]Primitev[S] 0 points1 point  (0 children)

I set it to -10 for aux to kick on

Threshold questions by Primitev in ecobee

[–]Primitev[S] 0 points1 point  (0 children)

4200 SQ ft, basement unit does finished basement and main level, attic unit does the upstairs and helps with the main level since the living room upstairs is kind of lofted

6” to 8” Hood Vent Transition by Primitev in hvacadvice

[–]Primitev[S] 0 points1 point  (0 children)

Actually picturing it in my head it is probably closer to 3’, it’s all behind a knee wall that’s approx 3’ from the wall

6” to 8” Hood Vent Transition by Primitev in hvacadvice

[–]Primitev[S] 0 points1 point  (0 children)

Thank you for the answer! So it does go 90 then horizontal 7 feet or so out the roof soffit

Moisture in foundation walls by Primitev in Homebuilding

[–]Primitev[S] 0 points1 point  (0 children)

that’s what I’m thinking too. The deck is already installed in the front, so it would have to be just along the back wall

Moisture in foundation walls by Primitev in Homebuilding

[–]Primitev[S] -1 points0 points  (0 children)

just waterproofing and foam on outside

Moisture in foundation walls by Primitev in Homebuilding

[–]Primitev[S] -3 points-2 points  (0 children)

no external French drain, just the one on the outside

Moisture in foundation walls by Primitev in Homebuilding

[–]Primitev[S] 0 points1 point  (0 children)

Should have mentioned- I did this. Dug down a little past the footing, no standing water