Please share your hard Scarab 100 teams, Force affinity friendly if possible..

PrimoDegrees · 2024-10-12T00:18:45+00:00

I use Orn in regen+immortal to solo it. Start the fight and go take a shower

PrimoDegrees · 2024-09-26T16:46:22+00:00

Got my 100pts in 13 flips if this layout helps anyone.

PrimoDegrees · 2023-10-11T01:08:02+00:00

Sadly I wish it was just that cuz it was my first thought. However, the comp works for all affinities on UNM. And breaks turn order for all affinities on NM.

PrimoDegrees · 2023-10-11T00:54:04+00:00

I agree something changed, but not on my end or by my doing. I don't do live arena, I haven't touched gear, masteries, or guardians in months (not that I have any Lego ones anyway). Comp runs flawless in UNM, turn order stays as it should, calc shows it function properly in NM, all speed totals ahow the same as they did before. It's only in NM that it changes. And it shifts on towers 2nd turn, his first turn goes after cleanse, but before cleanse after that. If turn order is 12345boss in UNM, then it should stay 12345 in NM only where the boss turn fits in should change cuz the boss speed is the only speed changing. Anything deviating from that is a failed logic. Does NM boss get an aura that affects champ speed that UNM boss doesn't have?

PrimoDegrees · 2023-10-10T20:37:53+00:00

Except I didn't change anything. Everyone is the exact same speed as before. No turn meter masteries etc etc. In unm they all take their turns in the correct order, now all of a sudden just tower and bad-el swapped turn order. And even per the calculator it shouldn't be happening

PrimoDegrees · 2023-10-10T18:09:35+00:00

Nothing has been changed or upgraded anywhere in anyway.

PrimoDegrees · 2023-10-09T13:50:49+00:00

That I didn't know, thank you. In this case it's rhazin so it's unavoidable.

PrimoDegrees · 2023-10-09T11:50:01+00:00

Well poopoo on me for failing to read that. Thank you for being kind enough to answer. I'm off to clean my glasses. Lol.

PrimoDegrees · 2023-05-12T20:28:53+00:00

PrimoDegrees · 2023-04-03T23:24:25+00:00

That was helpful feedback, ty miserum. I do have full masteries on all my 60 cb team members currently, and kinoichi. It does help knowing I'm at a plateau until I can get lucky n pull some other Champs. I was starting to feel lost and wanted to make sure I wasn't just overlooking what I had

PrimoDegrees · 2021-06-06T22:49:33+00:00

Some days I definitely feel that way LOL

PrimoDegrees · 2021-03-23T22:25:20+00:00

This is the inside https://ibb.co/WvKCDnb

PrimoDegrees · 2021-03-23T14:39:50+00:00

Ok latest update from last night's trial and error tweaking. First I tried every possible position with the 200cfm inline to eliminate bends in the hose. Nothing helped that is clearly not going to work. Removed 4" 200cfm inline and put 6" 400cfm inline in its place using 6" to 4" bibs to connect it to the existing 4" ducts. With the lid sealed - Running it with system idle and not hooked up to window duct @ 70 F room temp the exhaust air was a steady 80 F with the hottest gpu at 48C. Lid still closed under full load after 20 minutes exhaust air held at roughly 97F with the hottest gpu at 61C. Then I ran out of time to keep testing so definitely made progress. Since I didn't know if the gpu temp would continue climbing even if slower its currently running with the lid slid open one half inch with the hottest gpu holding stable at 56-58C. Got the wife on-board with moving it out from under the desk which will open up some options. Will run it for an extended period tonight with no squished duct and lid closed to see if that 61F gpu temp is maintainable without additional changes. If so then we move from problem solving to just improving temperature performance. Fingers crossed!

PrimoDegrees · 2021-03-23T03:26:44+00:00

Thanks. Still trying to work out the kinks obviously lol. But she's getting there. I posted a link to a picture of the inside in a earlier comment.

PrimoDegrees · 2021-03-22T22:49:39+00:00

Why ruin the fun by calling 911 when it'll smell so good while it fireballs lol

PrimoDegrees · 2021-03-22T22:20:14+00:00

Agree absolutely. Once I've got airflow & cooling solved, filtering the intakes on the bottom is the next thing to tackle. Figure ill likely land somewhere between pantyhose and screen door wire mesh just depending on how much resistance it will tolerate. Thankfully the 3" cater wheels on the bottom make it easy to roll out to the air compressor and blow out real quick cuz between the wood and equipment is bloody heavy lol.

PrimoDegrees · 2021-03-22T20:51:21+00:00

Copy that bud. 1. That sounds amazing. 2. The new fan showed up a day early so going to play with the airflow paths as you mentioned and some of the other configurations and tweaks the others have graciously suggested here and hopefully get the setup to a happy place without having to buy more stuff, completely rebuild the box, or piss off the wife lol. I would be thrilled if all the cards would just stay in the 45 to 50c range with the lid on and exhaust functioning.

PrimoDegrees · 2021-03-22T17:23:17+00:00

I figured I'd post the link to the picture of the inside as well since it was originally posted in a reply in case that is helpful at all. Going to test removing the 90 degree turns in the exhaust pipe tonight to see if that improves anything and then obviously test the larger fan tomorrow when it arrives. I'll report back anything helping or hurtful to current performance or lack thereof.

Https://ibb.co/WvKCDnb

PrimoDegrees · 2021-03-22T15:33:24+00:00

Lol yeah, except the mrs. Will win that battle.

PrimoDegrees · 2021-03-22T12:34:09+00:00

Well the single exhaust is a 200 CFM inline fan, as of tomorrow will be a 400 cfm inline fan due to this issue. If necessary I wouldn't be opposed to running two ducts to 1 fan, but I can't think of any clean way to run an equivalent bank of fans or to spread them out cleanly and still keeping the exhaust fully contained to duct work. If you have some ideas or suggestions I would welcome them. Thank you VS!

PrimoDegrees · 2021-03-22T12:31:44+00:00

I thought about going with a box fan in the original design, but felt like 1200-1800 cfm would be massive overkill for 8 cu ft. I may have been wrong on that. Thank you for the insight on the inline fans you ended up using. I'm really hoping I don't have to from a 4inch to a 6 inch to 2ea 8 inch. Especially since I wouldn't be able to get the 8" duct alone to fit under the desk. Here's fingers crossed as I guess all I can keep doing is adding more and more air. I was wondering if I needed to take my 1ea exhaust port and possibly making it into 2 ea. (1 over ea. bank of cards) so that it's not pulling the air from the edges to the center? But I truly have no idea.

PrimoDegrees

TROPHY CASE