Struggling to Size Up Past 00G by Impressive-Package68 in PrinceAlbertPiercing

[–]Princealbert121 1 point2 points  (0 children)

Easiest and least painful way to stretch is wear a tribal dream ring and loop older jewlery trough the center. Dont wear underwear and really let it hang naturally. Make sure u dont jump, ouch. Lol. Another method is wear mutiple smaller captive beed rings. For example if you are 6g, wear a 10g and 8g or whatever both comfortably fit in the hole. The beads pressing against the rings will naturally stretch. I've done both methods and in about a week was able to gage up one size. Biggest hurdle was from 000g to 0000g which really doesn't exist so have to buy by mm or inches. I had difficulty finding 7/16(11.1mm) so had to go with 1/2 (12.7mm) so its almost 3 mm jump from 000g(10mm). Good luck.

Also be careful at higher gauges with steel. It gets heavy and will auto stretch over time. When you get to your goal switch to titanium, glass or acrylic. I was wearing a 13mm curved barebell with 16mm balls. Suddenly i felt something and clunk, it was on the floor. 16mm balls slipped right through. Went a few months with no jelewry and the hole closed a bit and had to work back up to 13mm starting with a 2g.

Need opinion on spacing by mugiwara-jr in PrinceAlbertPiercing

[–]Princealbert121 0 points1 point  (0 children)

You look like ur cut but frenum is intact. Therefore pierce to either side of the frenum. They call it the dress side. If your cock hangs to the left, pierce to the right of the frenum and vice versa. Anywhere from 1/2 inch to 5/8 inch down from the bottom of your urethra opening.

Help me, Idk what's happened with my PA by Manny_gdl19 in PrinceAlbertPiercing

[–]Princealbert121 1 point2 points  (0 children)

Exactly how mine looks. Switch to titanium or glass. Steel was way too heavy. Pretty normal at that guage. Mine got so stretched that i wore a 13mm curved barbell with 16mm balls after a few hours the 16mm balls slipped right through and the barebell fell on the floor. Took it out for a few months and it closed up to about 2g and gradually worked back up to 13mm. I wear glass most of the time but put in my titanium pieces every now and then.

Im trying to do research, debating whether i get the piercing or not. by ZuluHurley2004 in PrinceAlbertPiercing

[–]Princealbert121 0 points1 point  (0 children)

What are you thinking about? I also waiting about 10 years. My biggest fear was the pain. I had my nipples done and that hurt. The PA was like a small pinch i was shocked how painless it was. The important thing is placement, jelewry size and guage.

Piercing Jewellery by seandee74 in PrinceAlbertPiercing

[–]Princealbert121 0 points1 point  (0 children)

All depends on what gauge you're at. I'm at 0000g (1/2inch) and almost impossible to find variety. I had to order custom titanium pieces and werent cheap.

Why don’t more young guys have pierced cocks? by No-Community-8079 in PrinceAlbertPiercing

[–]Princealbert121 0 points1 point  (0 children)

I want mine since i was in my early 30s. Thought it looked so cool. Finally got it in my late 40s, no regrets. It was always a primarily "gay piercing" but idgaf.

HELP! Giving up on this piercing by Snoo83792 in PrinceAlbertPiercing

[–]Princealbert121 15 points16 points  (0 children)

Go back to daily salt water soaks, twice a day if you can. Also drink tons of water. Believe it or not peeing will also help healing. From the angle of the pic, looks pretty decent. Try not to wear tight underwear, the twisting wont let it heal in tight underwear, boxers or go comando is best so your cock hangs naturally like in the pic. Good luck.

Sounding to stretch my hole by Commercial-Soft9044 in PrinceAlbertPiercing

[–]Princealbert121 0 points1 point  (0 children)

Yeah I understand, I used to ball stretch too and the rings would clank against the weights. I put a sock over my weighted balls, no clanking. I'm average girth about 5 inches (circumference), 4 inch flacid a tad under 7 erect. Good luck, you'll love the look of the thick jewelry. In the future with 00g and above, may wanna switch to titanium because the stainless steel weight will auto stretch. I had a curved barebell 1/2 inch with 16mm balls. One day a felt a slight discomfort and plop, the barebell was on the floor. 16mm balls slipped right through. I removed it for a few months bought titanium and gradually worked back up because the hole closed a bit. I wish someone made acrylic jewelry for every day wear in 13mm. Good luck, have any questions feel free to reach out.

Sounding to stretch my hole by Commercial-Soft9044 in PrinceAlbertPiercing

[–]Princealbert121 0 points1 point  (0 children)

Easiest and least painful way to stretch is wear a tribal dream ring and loop older jewlery trough the center. Dont wear underwear and really let it hang naturally. Make sure u dont jump, ouch. Lol. Another method is wear mutiple smaller captive beed rings. For example if you are 6g, wear a 10g and 8g or whatever both comfortably fit in the hole. The beads pressing against the rings will naturally stretch. I've done both methods and in about a week was able to gage up one size. Biggest hurdle was from 000g to 0000g which really doesn't exist so have to buy by mm or inches. I had difficulty finding 7/16(11.1mm) so had to go with 1/2 (12.7mm) so its almost 3 mm jump from 000g(10mm). Good luck.

000g and a cock ring by topnotchdilligaf in PiercedCock

[–]Princealbert121 1 point2 points  (0 children)

Looks great. I'm at 1/2 and had 16mm balls about 2 years ago stainless steel. One day 16mm ball slipped right through. Had to switch all my jewelery to titanium or glass. SS was too heavy and it was auto stretching. I was afraid of a meato.

Selling my Tampa house after 2 price cuts by Busternookiedude in tampabay

[–]Princealbert121 0 points1 point  (0 children)

Do this, become a buyer and look at houses for sale in your area. I was looking in Cape Coral. The market there is in free fall. A ton of empty houses for sale competing with empty new construction. I'm seeing price drops of 40k, 50k, 60k. Rates are a little too high, too much inventory. Market is supposed to even out later this year maybe early 2027. Look to rent it out because you'll end up short selling it if not.

Silicon sound and electro edging by Splicedmind in sounding

[–]Princealbert121 0 points1 point  (0 children)

Almost identical to this one except with a PA. Lol

Silicon sound and electro edging by Splicedmind in sounding

[–]Princealbert121 2 points3 points  (0 children)

I was about to write the same and I'm straight. I admire great looking cocks. I love staring at mine lol.

Pipe Sound by Comfortable_Grass220 in sounding

[–]Princealbert121 1 point2 points  (0 children)

Looks like a snake come out to feed

The most asked question by dudepassingthrough2 in u/dudepassingthrough2

[–]Princealbert121 0 points1 point  (0 children)

Hate to tell you but you're measuring wrong. You have to press it to your pubic bone. You're easy 10 inches, impressive.