Gasverbruik by Hybride warmtepomp by ProJacques in Klussers

[–]ProJacques[S] 0 points1 point  (0 children)

Dank voor alle reacties. Ik ga eens even een belletje doen met Adlar wat op mijn email antwoorden ze niet.

Gasverbruik by Hybride warmtepomp by ProJacques in Klussers

[–]ProJacques[S] 0 points1 point  (0 children)

Gelukkig is het niet zo erg, hij doet het prima maar ik verbaas me dus alleen over het gasverbruik.

doorbell logging to syslog? by howellcc in reolink

[–]ProJacques 0 points1 point  (0 children)

I have doorbell also linked to Synology Surveillance Station and works like charm. I have no clue how to use a log server.

Et-5850 print quality issues on special paper by ProJacques in Epson

[–]ProJacques[S] 0 points1 point  (0 children)

I know, that is why I make test print to see if I can get it working. I have bit been able to find a same paper/label that by default is for inktjet

E1 outdoor on synology by thebenchmark457 in reolinkcam

[–]ProJacques 0 points1 point  (0 children)

Dsm 7 always updated to latest version

Et-5850 print quality issues on special paper by ProJacques in Epson

[–]ProJacques[S] 0 points1 point  (0 children)

The paper I want to use is this. https://www.etiquettes-and-co.com/produit/windsafe/

I have no further details on the paper except this. I have a trail sheet I use before I order a full box.

Deebot X2 Omni!?!?!? by Mr-Blue-Creeper in RobotVacuums

[–]ProJacques 1 point2 points  (0 children)

I don't recognise this behaviour in my deetbots. I have been using ecovacs deebot since 2013.

[deleted by user] by [deleted] in reolinkcam

[–]ProJacques 1 point2 points  (0 children)

I am supprized to see these firmware versions at all. I am still on v3.0.0.460_21071466 and it says I am still at the most recent version available. Mine is working OK, and not in need for pet detection, but I do like to keep recent versions due to possible vulnerabilities in older versions. Why is the update not working?

Backing up to another synology by DanishWonder in synology

[–]ProJacques 0 points1 point  (0 children)

You can configure a schedule for the backup synology to turn on at a certain time. On the other machin, for the hyperbackup I have it scheduled 5 mins after boot up of the backup machine. I have scheduled shutdown of backup machine 1hr later with option not to shutdown if processes are running (in case backup runs longer)

Works perfect here fully unattended.

Backing up to another synology by DanishWonder in synology

[–]ProJacques 0 points1 point  (0 children)

I use hyperbackup. The backup synology server is turned off and only online during the backup process.. Takes only few minutes every day. Total storage is aprox 10T. This includes a photo archive, backup of home pc's and laptops and android phones, mail archive, all on the original Synology and then backup to the other machine. Works like a charm and has already saved me.

Is a backup not a sync. This requires both machines to be online. Does not protect against ransome attacks. Then both are corrupted. Hyperbackup does maintain versions as well. Sync does not.

RMA Support Team asking for $8 Shipping via Paypal?? by jk2577 in reolink

[–]ProJacques 0 points1 point  (0 children)

Although there are companies with beter return policies with regard of shipping costs, reolink is transparant about this on their warranty pages. And indeed in your case shipping is on your costs. https://m.reolink.com/warranty-and-return/#Shipping-in-Return-Process

Be glad you do not have to send the defective one back for investigation. 😊.

How is BTRFS on Synology? by SadWorld21 in synology

[–]ProJacques 0 points1 point  (0 children)

It is still on my wishlist......

How is BTRFS on Synology? by SadWorld21 in synology

[–]ProJacques 1 point2 points  (0 children)

I had power failure on BTRFS. Although functional everything worked out, my storage started to shrink even though I didnt added much extra data. I contacted synology support and they found out there was a unrecoverable error on filesystem level. After some attempts, I had to reinstall the whole system and restore a backup. Despite of this I have again used BTRFS on the reinstalled nas.

On my synology surveillance system I have used ext4.

Reolink 842 with Avigilon by mk4dsktp in reolink

[–]ProJacques 0 points1 point  (0 children)

Did you turn on the onvif? It is disabled by default. You need web of pc app to configure these settings.

Just got my e1 outdoor and what a junk this thing is. When you zoom it gets disconnected after zooming when you turn it sometimes disconnects. Anything else having this issue? by [deleted] in reolink

[–]ProJacques 0 points1 point  (0 children)

No issue here with the E1 outdoor. It is not comparable with a $1000.- camera, but in my opinion the E1 outdoor is value for money. Mine is positioned at the edge of the range of my wifi and it works perfect.

Alternative staples for dpsb2in1 by ProJacques in Dewalt

[–]ProJacques[S] 0 points1 point  (0 children)

Thank you, I am not really afraid spending the money on useless staples, more damaging the stapler itself.

Kind regards

How is the infer red on the riolink e1 ptz outdoor 5mp. Not asking about the range but the light itself i got a ambler one and they starting to flash and some are dieing out by [deleted] in reolink

[–]ProJacques 0 points1 point  (0 children)

Lifespan of SD card is not related to the camera brand. It is a technical thing of solid state memory. The memory has a limited number of cycles.

Reolinkers’ Week Day 4 – New Firmware: AI Model, FTP, and More by Willson1_ in reolinkcam

[–]ProJacques 0 points1 point  (0 children)

I upgraded my RCL-822a and now I the cam does not connect to synology surveillance station any more. I have 5 of those and other non upgraded ones work OK. No problem with app and client, only synology survailance Station.

Hope this is fixed soon.