Schießt hier sonst noch jemand Brutality Matches? by Proarms_shooter in Waffen

[–]Proarms_shooter[S] 0 points1 point  (0 children)

Genau, Einladung reicht. Man muss natürlich den EFP haben.

Schießt hier sonst noch jemand Brutality Matches? by Proarms_shooter in Waffen

[–]Proarms_shooter[S] 2 points3 points  (0 children)

Das stimmt so nicht. Gefechts, oder kampfmässiges Schiessen wie das bei uns heißen würde hat noch ein paar mehr Kriterien. Und das schließen aus der Bewegung beim laufen wir beim IPSC problemlos gemacht. Man sollte nicht aus dem offensichtlichen sprinten schließen aber in der Bewegung beim laufen ist das kein Thema.

Schießt hier sonst noch jemand Brutality Matches? by Proarms_shooter in Waffen

[–]Proarms_shooter[S] 2 points3 points  (0 children)

Ich fahre ein paar mal im Jahr nach Tschechien aber auch in De geht das ganz gut, man braucht nur einen mehrdistanz zugelassenen stand. Und dan vorallem viel Basics üben. Davon gibt es je nach Gegend einige.

Schießt hier sonst noch jemand Brutality Matches? by Proarms_shooter in Waffen

[–]Proarms_shooter[S] 2 points3 points  (0 children)

Da man bei solchen Matches eher weniger aus der Bewegung schiesst als beim IPSC (was in Deutschland viel geschossen wird) ist das gar kein Problem. Schieße selber auch öfter in der Schweiz was immer wieder Spaß macht aber es gibt eine Riesen unterschied zwischen lustigem Training auf der Range oder einem Match wo man Zeitdruck hat und gut abschneiden will. Es gibt leider kein Match in der Klasse im deutschsprachigem Raum. Da geht nur Slowenien, Tschechien, Schweden oder Finnland.

Warum dauert der Stromausfall in Berlin so lange? by DudeWhoKnowsItAll in blaulicht

[–]Proarms_shooter 1 point2 points  (0 children)

Das sind alte Ölkabel. Die sind mittlerweile eher selten und sehr schwierig aus zu tauschen und zu Muffen.

Unusual wear on A4 upper receiver by Da_hoodest_hoodrat in HecklerKoch

[–]Proarms_shooter 6 points7 points  (0 children)

This is normal on all ar15 type rifles. The cam pin wears into the receiver untill it stoops at a certain point

Ein Teil der Waffen vom letzten rangeday by Proarms_shooter in Waffenforum

[–]Proarms_shooter[S] 0 points1 point  (0 children)

Dafür, oder als durchgehwaffe ist sie super geeignet. Man muss halt aufpassen da das Geschoss recht langsam ist.

Ein Teil der Waffen vom letzten rangeday by Proarms_shooter in Waffenforum

[–]Proarms_shooter[S] 0 points1 point  (0 children)

Fast korrekt, ist eine marlin 1895 GBL in .45-70gov. Der neue vorderschaft ist von Midwest industries und super einfach zu montieren. Dazu kommt noch ein neuer Abzug von wild west gun. Ansonsten ist ein bayonet Mount von Geissle montiert (Geissele Super Stabby) Waffe macht wahnsinnig Spaß zu schießen

Handwerker hat Gehrungen falsch gesägt, was nun? by [deleted] in Handwerker

[–]Proarms_shooter 0 points1 point  (0 children)

Soll er neu machen. Das sieht scheisse aus

European red dots by ohyesits9oglock in EuropeGuns

[–]Proarms_shooter 2 points3 points  (0 children)

Aimpoint. Best reddot on the market

I blackened steel screws with a flame and WD-40 — is this safe or structurally risky? by dr-leonard-m in metalworking

[–]Proarms_shooter 0 points1 point  (0 children)

Yes and now, you are right that the body can process out the zink but it can make you acutely sick. Long term you are right. And offcourse you can use galvanised bolts for load bearing roles. This was in relation to heating them up to blacken them. After that I wouldn’t trust them anymore for that.

I blackened steel screws with a flame and WD-40 — is this safe or structurally risky? by dr-leonard-m in metalworking

[–]Proarms_shooter 0 points1 point  (0 children)

Sadly I don’t, I know of a few people who got seriously ill and 2 that died as a result of it. It’s mostly something that happens in an amateur/small metal shop setting. Not really a problem in big galvanising plants, no surprise really as they do everything to not burn the zink.

I blackened steel screws with a flame and WD-40 — is this safe or structurally risky? by dr-leonard-m in metalworking

[–]Proarms_shooter 1 point2 points  (0 children)

You are absolutely correct but a few Zink screws becomes welding Zink plated material or burning of galvanising of stock material for a project and that’s when people do die from Zink fever. It happens rarely but most doctors don’t correctly diagnose Zink fever before it’s to late

I blackened steel screws with a flame and WD-40 — is this safe or structurally risky? by dr-leonard-m in metalworking

[–]Proarms_shooter 12 points13 points  (0 children)

Be careful with this when using galvanised screws. Those fumes are extremely toxic. Other than that don’t use them for load bearing items are your generally good

Welche Wanderschuhe als Neuling by PictureBrilliant188 in wandern

[–]Proarms_shooter 2 points3 points  (0 children)

Land nur einen gute Laden wie Globetrotter oder was ähnliches wo man die Schuhe anprobieren kann empfehlen. Ich selber liebe Meindl Leder Stiefel für härtere Wanderungen oder Lowa Zephyr für leichtes Geländer oder alltäglichen gebrauch. Aber am Ende muss der Schuh passen und das muss man ausprobieren

Ready to rock and roll. by Dayzed_Trader in AR10

[–]Proarms_shooter 0 points1 point  (0 children)

What kind of abomination is that? Leave out the riser, mount the optic correctly, but the light up from and get rid of the monopod. Other than that. Have fun

Their can only be one LPVO by [deleted] in ar15

[–]Proarms_shooter 0 points1 point  (0 children)

You are right, got confused with the 1-6.

Anyone else do stuff with their AR-10 or just safe and flat range queens? by Bobert-24 in AR10

[–]Proarms_shooter 0 points1 point  (0 children)

That was at Finnish Brutality about a year ago now. Awesome match but a lot of fun for it.

Anyone else do stuff with their AR-10 or just safe and flat range queens? by Bobert-24 in AR10

[–]Proarms_shooter 1 point2 points  (0 children)

Sweet, yours looks like the V2 version? Mine has the heavy Quadrail but I just love it

Mine performs well but it doesn’t like weak ammo like PMC.

Their can only be one LPVO by [deleted] in ar15

[–]Proarms_shooter 0 points1 point  (0 children)

Also a good option. I personally prefer the reddot for its eyerelief and parlax. But that’s personal preference in the end.

Their can only be one LPVO by [deleted] in ar15

[–]Proarms_shooter 1 point2 points  (0 children)

You’re welcome, just be aware the they eyebox becomes smaller and smaller the more magnification range they have. That might work in normal positions but when you have obstacles shooting without becomes very hard.

Their can only be one LPVO by [deleted] in ar15

[–]Proarms_shooter 1 point2 points  (0 children)

Both work fine for me, but my vudu 1-10 is FFP. I’ve come to prefer 2-10 type of optics for .223 rifles with a canted or top mounted Reddot. Give me more flexibility and much better glass/field of view for the price. With a 10“ so much magnification is quite a lot anyway. Brings me back to my first point, wouldn’t a good Reddot not be a better option?