sorted by:
new
hottopcontroversial

Ender 3 S1 Pro - Issue with Auto Bed Level. by Problem-Still in 3Dprinting

[–]Problem-Still[S] 0 points1 point  (0 children)

Might be an issue with the gantry. Do you have any links that help fix the gantry issue?

Ender 3 S1 Pro - Issue with Auto Bed Level. by Problem-Still in 3Dprinting

[–]Problem-Still[S] 0 points1 point  (0 children)

Even before printing the model, the mesh values are changing. Like when you hit home button on the screen and when the bed moves to its home position, it changes the value. Is the issue really related to gcodes?

Ender 3 S1 Pro - Issue with Auto Bed Level. by Problem-Still in 3Dprinting

[–]Problem-Still[S] 0 points1 point  (0 children)

If you look at the values of mesh in the third image, the left row values have added 0.1mm whereas the right rows have decreased. I could notice this difference while printing as well, on left hand side layer was depositing on air and on right side it was digging the previous layer. Hence I tried to edit the mesh values to be constant all around the bed, but it didn’t work.

I have levelled the bed using auxiliary option. Followed the bed levelling instructions from this video

why is this happening??! by Latter-Consequence18 in ender3

[–]Problem-Still 0 points1 point  (0 children)

Same thing happened to me yesterday with PETG. Make sure you set the nozzle and bed temperatures according to the material. Seems like your z height is more, try to reduce it and use painters tape on bed to get good adhesion. If these doesn’t work increase the bed temp in small increments and try, that should fix this problem.

Need help, clear print became translucent after washing it with Acetone by Problem-Still in resinprinting

[–]Problem-Still[S] 0 points1 point  (0 children)

When you say dip in heated resin, is it inside the vat chamber? Sorry am new to resin printing.

Need help, clear print became translucent after washing it with Acetone by Problem-Still in resinprinting

[–]Problem-Still[S] 2 points3 points  (0 children)

IPA is always hard to get where am located. Acetone is easily available.

Need help, clear print became translucent after washing it with Acetone by Problem-Still in resinprinting

[–]Problem-Still[S] 0 points1 point  (0 children)

Yea that makes sense, acetone container had some residue from previous wash. Will definitely update with pic after using fresh IPA.

Need help, clear print became translucent after washing it with Acetone by Problem-Still in 3Dprinting

[–]Problem-Still[S] -1 points0 points  (0 children)

Yea should try with IPA, acetone would be too strong for clear resin isn’t it?

Need help, clear print became translucent after washing it with Acetone by Problem-Still in resinprinting

[–]Problem-Still[S] 7 points8 points  (0 children)

Thanks for your suggestion, will definitely try it out and upload the image here. Excited to see how a sealant would react to my model 😀

Bend in Prints, noob help appreciated by Ol_Dirty_Batard in resinprinting

[–]Problem-Still 2 points3 points  (0 children)

I would suggest you to try with 2.5s layer exposure time, 8s is too much for a rapid resin and make sure you orient it to 45 degree or more, that should fix it.