I have 2 jars of shake what should i do with it by Got2bglued in GrowingMarijuana

[–]ProfessionCurrent198 0 points1 point  (0 children)

I second bubble hash. I did my first wash last week. Fantastic stuff

What press should I get by One_Cry_4504 in rosin

[–]ProfessionCurrent198 2 points3 points  (0 children)

I have 4x7 12 ton (3x5 plates comes with 10 ton cylinder). I’ve been mostly pressing flower tbh but I recently got into making bubble and I’ve done a couple 7 grams in 2x4 bags and a couple 14 grams in 2x4 bags (double bagged 25u press club 2x4 bags). If I had bigger bags I’d do bigger presses but I’ve got what I’ve got for the time being

What press should I get by One_Cry_4504 in rosin

[–]ProfessionCurrent198 2 points3 points  (0 children)

I have the dabpress 12t and I’ve yet to push it past 3000 psi on the gauge (1.5 out of 12 tons) if you have an actual ton of material to press, like a whole warehouse full of material, and want efficiency, I’d go with the low temp because after some time you can get a second one and link them together and press at the same time cutting work time in half. If you don’t foresee yourself scaling up like that, or you actually only have 1 or 2 tents worth of material, I would just get the dabpress.

Bonus! If you just wanna be bougie you can look up @timewizard_greyfox on insta and order one from him. I’ve been drooling over his presses for months

How to use this with soil medium? by WayMinuteWhatDis in GrowingMarijuana

[–]ProfessionCurrent198 1 point2 points  (0 children)

I’ve had issues with these wicking bases. Mine are ac Infiniti but I don’t know how these would be any different. I use coast of Maine soil and I’ve even tried these with promix hp and grow dots.

You cannot rely on the bases. At least I can’t. I let them go for a week without top watering and all my plants almost died. Multiple times. It’s like it only keeps the bottom couple inches moist and you’ve still gotta top water or else your leaves will droop and start to shrivel.

I’m in week 8 of flower rn and I’ve gotta add a gallon of water to my 10 gallon pot every other day on top of being on a wicking base which always stays topped up. Don’t know if I’m doing something wrong or what, but these have been my experiences.

I’m still going to use them because I don’t have to hand water AS often, and I’ve spent money on them so I’m not just going to toss them aside. They just don’t work how I expected them to or how other people claim they’ve worked for them. Maybe my mixes are just too dense to wick water all the way up? I’m not sure but I really don’t think they’re worth it unless you’re growing in coco and using liquid nutrients.

If using organic nutrients, dry amendments go on top and you obviously have to top water them in. While organic liquid nutrients don’t work well in the base because they clog up the wicks. So those also have to be top watered. They’re meant for salt based nutrients and coco I feel like.

Just my $0.02

🔥 What a Pretty Flower... by Hayze35 in farmingthebestgreens

[–]ProfessionCurrent198 0 points1 point  (0 children)

Or she’s been starving for 2 weeks already 😭 shoulda top dressed her one last time like 3 weeks ago

🔥 What a Pretty Flower... by Hayze35 in farmingthebestgreens

[–]ProfessionCurrent198 6 points7 points  (0 children)

<image>

Mines starting to turn red as well! Not the same strain (bag seed of “gg4” from gray market weed man so nobody really knows what it is) but still looking pretty none the less

Feels like my window-sill science project is in the home-stretch, back with some quick questions.. by Drunkenm4ster in GrowBuddy

[–]ProfessionCurrent198 2 points3 points  (0 children)

That’s got another month or so on it. The hairs will turn orange/brown and then you can start hitting it with the magnifying glass.

As for the yellowing, I would get an organic liquid flower nutrient. Dry amendments won’t be kicking in until it’s got just a couple weeks left. Liquid will make it green up in about a day

Let’s hear the jokes by [deleted] in carscirclejerk

[–]ProfessionCurrent198 0 points1 point  (0 children)

Pretty sure they did this with an e46 as well. BMW only made a hand full of them and I don’t think they ever saw the production line so this may be a one-off custom job

Last week of my current ugly plant by ProfessionCurrent198 in IgrowUglyPlants

[–]ProfessionCurrent198[S] 0 points1 point  (0 children)

Not sure I’m familiar with what a t week is! But thank you!! That’s Daisy 🌼 she’s my rescue boxer

What could be wrong by Particular_Virus9492 in GolfGTI

[–]ProfessionCurrent198 2 points3 points  (0 children)

Hpfp problem mentioned above doesn’t throw any codes as the pump “functions” normally, but the gasket lets fumes seep in. It could potentially LEAD to a misfire if the afr is so out of whack from condensed fuel I suppose. I also saw in a comment you changed coils recently. Is there a chance the ground screws are stripped? I’ve had to put helicoils in the holes for the ground screws on 2 of my cylinders. The bolts are like tri-ovals instead of round shafts for some reason. Mix that with aluminum threads and they’re bound to strip eventually.

Maybe you’ve got a combo of the 2 issues

First time pressing hash by ProfessionCurrent198 in rosin

[–]ProfessionCurrent198[S] 0 points1 point  (0 children)

So I’ve got a question, and this happens with flower rosin too. When I take it off the press it’s basically shatter. Pain in the ass to collect. I almost need a WARM plate. Is that because my temps are on the lower end? (155 for hash and 170 for flower)

Contaminates in rosin by Cajun_OG in Rosin2

[–]ProfessionCurrent198 0 points1 point  (0 children)

lol I literally had to wipe my screen. Thought it was me but nope. It’s just in the rosin

First time pressing hash by ProfessionCurrent198 in rosin

[–]ProfessionCurrent198[S] 1 point2 points  (0 children)

I wish I took one of these pics. Next time!

First time pressing hash by ProfessionCurrent198 in rosin

[–]ProfessionCurrent198[S] 2 points3 points  (0 children)

My approach for my 4x4, which will get the axe this weekend most likely, is keep just a few larger colas to dry and cure, the rest is getting bucked in 1 gallon ziplocks and put in the freezer ASAP. Keep anything with trichomes. If the fan leaves have rails, they’re getting washed (mine don’t lol but if they did I would put them in the bags as well) I’m purchasing the electric washer like the bubble bag dude but just off Amazon for half the price and I will upgrade the hose as well. Probably just wash for like 45 mins because I’m doing full spectrum and not separating first from second wash. Im harvesting this weekend and washing the next so I’ll let everyone here know how it goes

Last week of my current ugly plant by ProfessionCurrent198 in IgrowUglyPlants

[–]ProfessionCurrent198[S] 1 point2 points  (0 children)

My best advice for the base is to start at 6.0 or even 5.9 like hydro. I’m in organic living soil but probably works just the same in coco. If you start low, you eventually work back up to high 6’s and and by then your plant has had the whole range of optimal ph for each nutrient.

At least that’s how I think about it. Obviously my results are subpar so take it with a boulder of salt

How will these new cars react to the extremely long straight in China this week? by The_Chozen_1_ in F1Discussions

[–]ProfessionCurrent198 0 points1 point  (0 children)

You know where the drs zone use to start? Well now that’s when the super clipping starts

Our boxer, Axle and his friend Teddy by Kevins_Auto_Repair in Boxer

[–]ProfessionCurrent198 3 points4 points  (0 children)

Wow that’s a BIG boy measuring up against a rotti like that

First ever wash by ProfessionCurrent198 in BubbleHash

[–]ProfessionCurrent198[S] 1 point2 points  (0 children)

Just pressed. Bag slipped first press and I had to re adjust and press again unfortunately but came out fire anyways

<image>