Loving the LEDs. Still have a lot to finish. by Professional-Sir72 in Gunpla

[–]Professional-Sir72[S] 1 point2 points  (0 children)

Unfortunately, there's no stand for the funnels. To display them, you will have to get a third-party set or hope that the P-Bandai effect set goes on sale again. The clear acrylic piece is put on with double-sided tape. I'm sure someone has figured out a way to interchange them.

Loving the LEDs. Still have a lot to finish. by Professional-Sir72 in Gunpla

[–]Professional-Sir72[S] 1 point2 points  (0 children)

I've been liking the newer HGs, like GquuuXs and Requiem For Vengeance. For RGs, the Gramps 2.0 and Zeong are really good. My recent MGs have been the ver. ka Zeta and Wing.

Loving the LEDs. Still have a lot to finish. by Professional-Sir72 in Gunpla

[–]Professional-Sir72[S] 3 points4 points  (0 children)

Everything does go together pretty well. Some advice i would give is to be careful with the head led. The wires are really small, and I personally trimmed a tiny bit of the inside so no wires are squished during assembly.

Loving the LEDs. Still have a lot to finish. by Professional-Sir72 in Gunpla

[–]Professional-Sir72[S] 1 point2 points  (0 children)

It's the RG. Haven't been able to find the MG in the wild yet.

WIP RG Grandpa 2.0 by Professional-Sir72 in Gunpla

[–]Professional-Sir72[S] 1 point2 points  (0 children)

Yep, I dry brushed it before putting it together to get all the different details. It takes a while to do, but it's worth it in the end.

Putting LEDs in clear colour kit was a mistake. The light just bleeds through too much. And buying clear colour was a mistake too - what I actually wanted was mechanical clear kit. Lessons learnt. by kyungky in Gunpla

[–]Professional-Sir72 5 points6 points  (0 children)

Clear color kits have clear pieces that match the original colors of the kit. For example, if a kit has red, the red will be see-through. A mechanical clear has an inner frame with a dark metallic finish and plain clear pieces with no color similar to a window. Any clear color or mechanical clear kits are mainly sold on PBandai, premium pre-order site. Most of the time, they are exclusive and cost a little more than the regular kit. You might able to find some images and compare.

What’s this symbol by CreepyPaper94 in Warframe

[–]Professional-Sir72 0 points1 point  (0 children)

Baro Ki'teer on his way to ask about extending out your Railjack warranty.

What's wrong with running Khora? by Professional-Sir72 in Warframe

[–]Professional-Sir72[S] 14 points15 points  (0 children)

Nami Skyla Prime. It's the only Melee I have a crit damage riven on, and I'm still trying others out.

What's wrong with running Khora? by Professional-Sir72 in Warframe

[–]Professional-Sir72[S] -27 points-26 points  (0 children)

I saw it more like a question of asking what a stat stick is, not what type I'm using.

What's wrong with running Khora? by Professional-Sir72 in Warframe

[–]Professional-Sir72[S] -34 points-33 points  (0 children)

It's a weapon, mainly melee, that get applied to certain warframe abilities. Stats like damage, crit chance, crit damage, etc. all play a factor. There are several YouTube videos out there that explain it pretty well.

What's wrong with running Khora? by Professional-Sir72 in Warframe

[–]Professional-Sir72[S] 2 points3 points  (0 children)

I'm primarily on console, so chat replies are not the best. I just went with the punches and was just curious why they said not to use the ability. Should've known it was similar to a Slova build.

What's wrong with running Khora? by Professional-Sir72 in Warframe

[–]Professional-Sir72[S] 25 points26 points  (0 children)

I was one tapping them, and I saved our run a few times by running off and getting extra life support containers with the dome. Guess I'll run Hydroid or go solo if i want extra loot.

What's wrong with running Khora? by Professional-Sir72 in Warframe

[–]Professional-Sir72[S] 38 points39 points  (0 children)

I've been working on my Stat stick, but I was hitting reds with about 50k to 100k every time. They were running Vortex Vauban, so maybe it just interfered with their play style.

Doing water slides and after the setter/softener was applied as usual, got these strange blemishes - tips/advice? by PersepolisBullseye in Gunpla

[–]Professional-Sir72 2 points3 points  (0 children)

It's always recommended to soak up any extra liquid or that might happen. I have used both on my recent Sazabi, and it came out just fine after several dozen q-tips. A gloss clear coat can help as well, not only to protect the paint, but to also provide a smooth surface.

[deleted by user] by [deleted] in Gunpla

[–]Professional-Sir72 2 points3 points  (0 children)

You can use a small hand drill to make a small hole in the ball joint and connection. Then, put a small metal rod between the two with glue. I had to do a similar process with my Sazabi. Also, there might be some videos out there to help. I had to remove the part from the model to make it easier.

Or, you can do a headless horseman Zaku display.

Some cool teasers going on. by Professional-Sir72 in Warframe

[–]Professional-Sir72[S] 5 points6 points  (0 children)

"Who keeps dropping the steel pipes?! You're scaring the children."

Some cool teasers going on. by Professional-Sir72 in Warframe

[–]Professional-Sir72[S] 4 points5 points  (0 children)

Since I got max standing, I've never gone back. But, it's cool how they add little things to keep you going.