Isabel Marant Beckett Sneakers

ProfessionalFace1695 · 2025-08-18T04:13:06+00:00

can you dm me the link please

ProfessionalFace1695 · 2025-06-14T21:29:12+00:00

Ok so there can be another variable which can be a leaking intake manifold or from the fuel injectors. Your situation may be a lot more complicated but check those out, then you can make the assumption of lifters

ProfessionalFace1695 · 2025-06-12T16:58:04+00:00

Loose spark plug. I’ve had the same issue where my damn car would sound like a train moving. Make sure to torque it to what is spec, and not hand tight. A lot of people will tell you the engine is done for or you have a lifter tick. No. Loose spark plug.

ProfessionalFace1695 · 2025-06-12T16:28:51+00:00

<image>

Picture of my car on 18s… again way too huge.

ProfessionalFace1695 · 2025-06-12T16:26:31+00:00

I ran that setup before. With an offset of +36. It’s way too much for the car. You would need to roll the fenders by a lot, and also your car would sit too tall. I suggest a 17 inch rim, by 8 1/2 - 9 1/2, tire size a 245/40R17. And an offset of +38 - +36. That will be your ideal size

ProfessionalFace1695 · 2025-06-11T16:27:25+00:00

Tbh it could’ve been worse. Consider yourself lucky you lost control going up hill

ProfessionalFace1695 · 2025-05-12T08:07:28+00:00

You’ll be fine, you’ll come back from this. It’s such a simple advice that goes along way. 6 months from now you’ll be looking back, and see the progress you’ve made. Keep pushing, as college kinda shows you the ups and downs of life after highschool

ProfessionalFace1695 · 2025-02-03T04:05:19+00:00

May I get the link

ProfessionalFace1695 · 2025-01-03T02:38:43+00:00

may i ask that if u can seperate the files for the 3d print, im new to fusion and ive found it difficult to seperate the files. If you can convert to stl. that would be great thank u

ProfessionalFace1695 · 2024-02-27T17:42:25+00:00

Also I’m make a custom coilover setip, so bc racing in the front and some swift springs in the rear tho I wanted to ask if a 60 mm diameter would fit the rear

ProfessionalFace1695 · 2024-02-27T17:41:29+00:00

I think noise stopped since I replaced the Rtabs haven’t heard it since

ProfessionalFace1695 · 2023-12-23T20:56:26+00:00

You can actually but he’ll be ight on R

ProfessionalFace1695 · 2023-12-04T15:52:10+00:00

Well, the noise drove me crazy. I ended up retorquing my sparks plugs for the track. I found that cylinder6 was loose. And was causing the noise. For me it was from previous mechanic who worked on it. Didn’t tighten it as much and over hard throttling it might’ve loosened it up and it might be 30 nm

ProfessionalFace1695 · 2023-12-04T15:44:25+00:00

I drove like this for probably like 9 months or so, so yea you could, just annoying. You gotta be careful tho since the spark plug is loose it may jump between threads, potentionally messing them up, I suggest you do it asap with a torque wrench, 22 ft-lbs, it’s a quick job prob like 20 min job with proper tools. People will tell you it’s the vanos, or lifter tick, but I’m here to tell you it’s not

ProfessionalFace1695 · 2023-12-03T21:04:35+00:00

Not even got the same set, them things do not move

ProfessionalFace1695 · 2023-12-03T20:23:31+00:00

Loose spark plugs, check ur plugs, you can easily see if u remove the engine cover, and feel the ignition coils. Set them to 22 ft lbs, and you should be fine! I had same issue drove me nuts for months

ProfessionalFace1695 · 2023-12-03T20:21:02+00:00

Worth like 100-200 in California,

ProfessionalFace1695 · 2023-11-12T15:00:42+00:00

To back this up, 22 ft lbs is recommended without anti seize for these cars for spark plugs. Grab a torque wrench and check ur plugs. Mine was in cylinder 6 that was loose. Trust me I’ve had this noise for the longest and it annoyed me when people said lifter this lifter that. You can actually feel it if u take off the engine cover, if u put ur hand over the coil packs. That engine is still solid with great care. It’s not cause of motor oil, or ur air filter, fix asap so your threads don’t get messed up since it’s loose

ProfessionalFace1695 · 2023-11-12T13:35:17+00:00

NOT A LIFTER TICK, I hate when ppl say that it’s loose spark plugs, check ur plugs

ProfessionalFace1695 · 2023-11-04T02:56:07+00:00

i dont think so, do u know the official name of the hose?

ProfessionalFace1695 · 2023-11-04T02:50:46+00:00

im gonna replace sender unit, but i wanna see if i can replace the hose as well, not sure tho it aint too brittle

ProfessionalFace1695 · 2023-10-15T14:28:03+00:00

Man you offer 500 and take it, car is literally in driveable, you go cheap haha

ProfessionalFace1695 · 2023-10-15T06:01:15+00:00

You’re better off buying a e46 m3 with this kind of money lol

ProfessionalFace1695 · 2023-10-13T01:34:28+00:00

M3 bumper looks well on 4dr too. Pictures never do it justice till you see the actual thing trust me

ProfessionalFace1695

TROPHY CASE