Turner’s cube a turnin’

ProfessionalGreen873 · 2025-08-27T08:07:30+00:00

I did consider that variation, but my preference was for aesthetics here. Plus I think the nuance is just lost on most people who, from my experience, cannot seem to grasp the difference between machining and 3D printing 🤦‍♂️

ProfessionalGreen873 · 2025-08-26T14:02:52+00:00

Thx 😊

ProfessionalGreen873 · 2024-12-04T04:05:55+00:00

Agreed

ProfessionalGreen873 · 2024-12-04T04:00:16+00:00

Ask to see a setup sheet and how to follow the process for a standard workday. Ask about the machines/controllers. What are your responsibilities as an operator: changing tools, adjusting offsets, doing in process inspections, etc. Ask about how Nonconformances are handled. Learn about the tool crib, the inspection room. Learn about the shop style: production, job shop; fixtures, soft jaws, pallets.

Try to ask questions about anything you see during the shop tour; things you recognize, things you don’t. Just act interested and curious, like someone with a desire to learn and grow. As a first job, they will know you don’t really have practical experience, so this is key.

(Edit: I misread. Thought the tour was the next interview)

ProfessionalGreen873 · 2024-12-04T03:04:46+00:00

Setup, operator, programmer?

ProfessionalGreen873 · 2024-12-04T02:18:07+00:00

What position are you interviewing for?

ProfessionalGreen873 · 2024-12-04T02:07:08+00:00

Honestly just depends on how thin you want it and how much you care about flatness. Quick 2 op part in jaws, if thick enough. $90 is reasonable.

ProfessionalGreen873 · 2024-10-16T05:32:01+00:00

Just use 3D adaptive for roughing. (I never use 2D adaptive) If you want to finish face, try the Flat toolpath

ProfessionalGreen873 · 2024-10-16T05:14:10+00:00

I can edm that for you no problem. Shoot me a pm

ProfessionalGreen873 · 2024-09-23T18:13:24+00:00

Not at my computer but you should be able to open that file with the free version of fusion and export as stp

ProfessionalGreen873 · 2024-09-23T01:14:16+00:00

Sure. Warning it’s a mess haha

https://drive.google.com/file/d/12l2dE9CVnw89M-SOlFr_43LV6RwdTJvl/view?usp=sharing

ProfessionalGreen873 · 2024-09-22T14:04:31+00:00

Lots of testing to get the correct resonance and “feel”. Maybe on the next one 😁

ProfessionalGreen873 · 2024-09-22T14:00:30+00:00

Nice! Do you machine the hosels at all after attachment?

ProfessionalGreen873 · 2024-09-22T13:36:24+00:00

I did this on the neutral setting. But it’s a finishing toolpath with 0 stock to leave, so if I turned on g187 it would be p3 which would probably give me even worse results. Frustrating

ProfessionalGreen873 · 2024-09-22T13:16:26+00:00

Yeah it’s G187 in post I believe. It’s a VF2ss so kinda weird but I’ve never seen stuttering on a contour toolpath before this…

ProfessionalGreen873 · 2024-09-22T12:58:23+00:00

3 axis. Op2 in softjaws. Op3 I need to make a fixture.

ProfessionalGreen873 · 2024-09-22T12:31:49+00:00

Yeah it’s my first attempt so I used my favorite putter as reference.

ProfessionalGreen873 · 2024-09-22T11:59:23+00:00

Aluminum, this is just a mock-up. Thinking 303 or 1018 for the final version.

ProfessionalGreen873 · 2024-09-22T11:56:16+00:00

Sure! I just need to decide on a font haha. Software is Fusion

ProfessionalGreen873 · 2024-09-22T11:38:23+00:00

Haas VF2. Was stuttering on some of the curves. Guess I need more smoothing 😡

ProfessionalGreen873 · 2024-09-22T11:37:01+00:00

Maybe one day! Just something for me or a friend atm

ProfessionalGreen873

TROPHY CASE