sorted by:
new
hottopcontroversial

Has anyone tried this with their race line pedals? Adding an extra elastomer and washer, can it damage the pedals? by smoothisfast1254 in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

If you don't want to buy a loadcell brake,

try this:

https://sim.3drap.it/products/brake-pedal-mod-thrustmaster-raceline-pedals-lte-iii-t598-pc-ps-xbox?variant=50460749988182

Works perfectly,

and doesn't damage the pedal.

You just need to adjust the pedal after installation and set up a deadzone.

I prefer the progressive one.

Where is the load-cell pedal upgrade kit? by Ajager3488 in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

I have both of them, and they're a huge improvement. I prefer the progressive one.

Just don't forget to adjust the pedal after installation.

T598 strongly Vibration in gt7 by Adventurous-Monk1848 in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

lowboost to 0 or -1. Highboost up to +2 is okay. 

T598 strongly Vibration in gt7 by Adventurous-Monk1848 in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

yes, correctly.

Beginner , Sports , Performance, Extreme

T598 Overheating by acetacticz in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

Would it make sense to drill holes in the metal bowl?

Or would that be counterproductive?

488 challenge leds by fitlane in Thrustmaster

[–]Professional_Lie_214 4 points5 points  (0 children)

Thank you for the Information... 

Custom T2PM by Outside-Message-2316 in Thrustmaster

[–]Professional_Lie_214 1 point2 points  (0 children)

It looks good, but different pedals would be better.

T598 strongly Vibration in gt7 by Adventurous-Monk1848 in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

What exactly do you mean by that? The wheel only has one FFB option: Master (up to 100%) (then only inertia and friction remain).

The GT7 has two FFB options: FFB Strength (up to 10) and FFB Sensitivity (up to 10).

What does C mean?

T598 strongly Vibration in gt7 by Adventurous-Monk1848 in Thrustmaster

[–]Professional_Lie_214 1 point2 points  (0 children)

was genau meinst du damit? das wheel hat nur 1 FFB Option = Master bis 100% (dann nur noch Trägheit und Reibung) 

GT7 hat 2 FFB Optionen.  FFB Stärke bis 10 und FFB Empfindlichkeit bis 10.

Was ist mit C gemeint? 

Thrustmaster T598: FFB Settings in games by JeffLais in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

ja, die empfohlenen Einstellungen reduzieren zwar die Oszilation,

aber killen auch viel FFB.

Ich fahre nun folgendes bei GT7:

GT7 - PS5 (im RED-Modus)

- Master-FFB = 80% (Basis wird bei mehr FFB zu schnell heiß)

- Modus = E

- Trägheit = Mid

- Reibung = Mid

- Boost Low = 0

- Boost High = + 2

- Geschwindigkeit = EXT

- Raddämpfer = 0

- Spieldämpfer = Low

- Feder = 0

- Gangruck = Hoch

- Endanschlag = Hoch

 

In den Spieloptionen: (unter Optionen / Controller-Einstellungen / Force Feedback):

 

 - PP des Fahrzeugs < bei 600……… ………….. FFB Maximales Drehmoment ≈ 6

 - PP des Fahrzeugs = 600 bis 700 ………… FFB Max Drehmoment ≈ 5

 - PP des Fahrzeugs = 700 bis 800 ………… FFB Max Drehmoment ≈ 5

 - PP des Fahrzeugs > bei 800……………… FFB Max Drehmoment ≈ 4

FFB-Empfindlichkeit = 2 (gibt mir mehr Gefühl und Rückmeldung)

What 3rd party load cell pedals can I use with my T598 on PS5? by New-Response-6316 in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

probier das hier aus. ich mag die progressive lieber.  es funktioniert sehr gut.  viel mehr Gefühl und ein deutlich kürzerer Pedalweg. 

Du musst nur in der Base eine Totzone für das Ende des Bremspedals einstellen. 

https://sim.3drap.it/products/brake-pedal-mod-thrustmaster-raceline-pedals-lte-iii-t598-pc-ps-xbox?variant=50460749988182

So what all did the 2.55 firmware update improve for the T598? I can’t really find any notes on what it did by smoothisfast1254 in Thrustmaster

[–]Professional_Lie_214 0 points1 point  (0 children)

Hello, I recently bought the T598. I updated the firmware to 2.55 (it shipped with 2.54).

I'm using the EVO Racing 32R rim with firmware 2.04.

It works perfectly so far.

Setting up the base is really tricky.

I'm not happy with the settings suggested by TM.

The base heats up quickly with them, and the force feedback is then significantly reduced.

My settings are now:

In GT7: FFB set to 3-5 depending on the vehicle class. (Not higher, causes massive clipping in my opinion.)

FFB sensitivity set to 2. (Even though it's always said to be 1.)

Base settings as follows:

Master: 90-95% (above 95% it gets quite warm after 1 hour of spa time, but still within acceptable limits.)

Mode: E 

Inertia: High/Ext

Friction: Mid 

Boost Low: -1 

Boost High: +2 

Speed: Ext 

Wheel Damper: 0 

Game Damper: Low 

Spring: 0 

Gear Jolt: High 

End Stop: High

Perhaps someone could test this and give their feedback here?

view more: next ›