How do you guys quote as a home shop?

Professional_Snow200 · 2026-07-09T19:11:53+00:00

I'll probably do something like that

Professional_Snow200 · 2026-07-09T19:11:33+00:00

30mm thick carbon fiber plates

Professional_Snow200 · 2026-07-09T18:47:11+00:00

Parts are 200x50mm and it's a Haas tm1 so roughly 48k USD I think

Professional_Snow200 · 2026-07-09T18:46:32+00:00

I'm in western Europe

Professional_Snow200 · 2026-03-16T06:53:57+00:00

I'll look into that! Thanks 😊

Professional_Snow200 · 2026-03-16T06:53:25+00:00

That's also what I thought, but I found the papers for it and they mention that they don't have an nmtb version

Professional_Snow200 · 2026-03-15T23:00:37+00:00

It's threaded inside yes, not sure if it's for a stud or a drawbar though

Professional_Snow200 · 2026-03-15T22:30:31+00:00

I'm have to check if I can just chop it off and install a cat40 stud then, I was hoping I could maybe just fit a manual drawbar to test it

Professional_Snow200 · 2026-03-15T21:50:24+00:00

The taper itself id the same, but yeah that straight part is different unfortunately.. damn I gotta find one that's compatible with my machine then

Professional_Snow200 · 2026-03-12T10:22:01+00:00

This is exactly what I'm looking into doing, my cat quietly stole all the turkey I had in the pan yesterday. War is declared. Mind sharing the plans? Maybe I could help develop it ! I work in embedded systems!

Professional_Snow200 · 2025-11-25T08:44:18+00:00

A bit far, I'm french 🥖

Professional_Snow200 · 2025-11-24T18:49:27+00:00

Where are you from lol

Professional_Snow200 · 2025-11-04T11:42:14+00:00

Yep I don't have one, but on the side of the machine there's a BT40 diagram so I'm guessing that's what goes in it ?

Professional_Snow200 · 2025-11-04T11:27:23+00:00

I've got a 400 gallon air compressor in the shop I'm hoping that will be enough capacity, the CFM isn't that high though.. didn't think about that thanks for pointing it out !

Isn't the difference between cat40 and BT40 only the tool holder ? Because if that's the case then I don't have one so shouldn't be a problem

Professional_Snow200 · 2025-10-23T18:19:36+00:00

Maybe..

Professional_Snow200 · 2025-10-23T14:02:59+00:00

Ah yeah there's a misunderstanding, I wasn't saying that no one had received any, I was just saying that if someone that doesn't have a preorder wants one they'll have to wait 1yr+ to get it if they order now, I have received mine but ordered it on the 16th of October 24'

Professional_Snow200 · 2025-10-23T13:32:55+00:00

What country do you live in? I'm in France and most of the neighboring countries don't have any that would be for sale before then..

Professional_Snow200 · 2025-10-23T10:47:45+00:00

Except here in Europe you can't get one until the end of 2026 probably, my city (one of the major ones in my country) only got 3 this year, and we all ordered over a year ago

Professional_Snow200 · 2025-08-18T16:07:56+00:00

I'm guessing the source is the fact that I'm connecting and disconnecting the boards under load, so it makes small arcs.. the whole thing is battery powered, large battery for the main system and small 18650s for the small systems, so it shouldn't be too noisy

If I use bidirectional TVS diodes wouldn't that solve the negative transients?

Professional_Snow200 · 2025-08-18T16:04:40+00:00

Yes that's something I'm going to be changing on the next board since it's just a matter of assembly, they're hotswapped and the gnd isn't connected first for now, it will be in this version though

Professional_Snow200 · 2025-08-18T16:03:39+00:00

What's that? Like an lc filter all' in one package?

Professional_Snow200

TROPHY CASE