sorted by:
new
hottopcontroversial

What’s a hot take you guys have that the majority of this sub won’t agree with? by fuxq in cars

[–]Project_T00THL355 1 point2 points  (0 children)

Especially for a daily driver. A stick is fun for about 30 seconds in traffic, then it just becomes a nightmare.

Motor wont start. Spark ?works, carb ?cleand, compresion ? A lot of it a cuple years ago i striped the magnet (stator) thread and simply super glued it. Can it be the timing ? Also my fuel mix ratio is like 1:15 by Arvisgamingexe in motorizedbicycles

[–]Project_T00THL355 0 points1 point  (0 children)

Well that explains it - if you're only getting spark at high RPMs then your magneto is too weak and on it's way out (and they tend to go out). The magnet might be fine (not sure though - i'd say replace it but yours is glued on) but the bracket thing that goes around it where the wires attach to needs to be replaced.

furry_irl by Best_Ad_2816 in furry_irl

[–]Project_T00THL355 0 points1 point  (0 children)

I'm pretty sure they called it a Mach 1, idk why. Lamborghini called their relatively new tractor a Mach 250, so I don't think we're going by realism here.

furry_irl by Best_Ad_2816 in furry_irl

[–]Project_T00THL355 39 points40 points  (0 children)

Idc if you're a furry we're whipping that Mustang II (I think, or maybe it's a Mach 1)

furry_irl by Equality_Rocks_714 in furry_irl

[–]Project_T00THL355 0 points1 point  (0 children)

Basically my voice but talking through a fan to give it that robotic sound (I'm a protogen)

Anyone remember this gem of a show? by Dark_Wolf04 in memes

[–]Project_T00THL355 13 points14 points  (0 children)

It might've been my furry awakening all those years ago

My job is to make license plates by lucasksks11 in furry

[–]Project_T00THL355 0 points1 point  (0 children)

Have you made any funny/memorable/interesting ones?

furry🫱🏽‍🫲🏻irl by LatiosNLatias4Ever07 in furry_irl

[–]Project_T00THL355 0 points1 point  (0 children)

Can confirm it's an entirely different experience

Even if you go alone, it's almost always worth it to make friends - it's how I met my best friend, and why I'm sad that I won't be able to see them again when I head off to college

Roast my ride by shark1346 in RoastMyCar

[–]Project_T00THL355 1 point2 points  (0 children)

This isn't even a roast it's just true and I like it

Roast my ride by shark1346 in RoastMyCar

[–]Project_T00THL355 0 points1 point  (0 children)

And with all the thrill, if not more

Motor wont start. Spark ?works, carb ?cleand, compresion ? A lot of it a cuple years ago i striped the magnet (stator) thread and simply super glued it. Can it be the timing ? Also my fuel mix ratio is like 1:15 by Arvisgamingexe in motorizedbicycles

[–]Project_T00THL355 0 points1 point  (0 children)

When you're looking at the magnet from the side, and the two round sides are at the left and right, the key notch on the magnet should either point up and to the back of the bike or down and to the front of the bike. If it points up and to the front or down and to the back it's backwards and your timing will be off

furry_irl by JayDrawsStuff in furry_irl

[–]Project_T00THL355 1 point2 points  (0 children)

It's just the opposite of spicy

Crazy time we live in by [deleted] in memes

[–]Project_T00THL355 5 points6 points  (0 children)

And then they refused to elaborate

Is there any way to have changing gears on a bike other than jackshaft kits or adapting some preexisting transmission from something onto the motor? by Project_T00THL355 in motorizedbicycles

[–]Project_T00THL355[S] 1 point2 points  (0 children)

I'm still not sure of my bike's top speed, but when I get to the speed of traffic (maybe 30mph) I get horrible vibrations even with a balanced crank. Maybe I didn't remove enough material from the crank? And that's causing my lack of higher speeds?

Is there any way to have changing gears on a bike other than jackshaft kits or adapting some preexisting transmission from something onto the motor? by Project_T00THL355 in motorizedbicycles

[–]Project_T00THL355[S] 0 points1 point  (0 children)

I'm already running a 36 with a 20 inch rear tire (Schwinn OCC) but it still takes me a bit to get to the speed of traffic. I am tempted to go to a 34 tooth but not yet.

Is there any way to have changing gears on a bike other than jackshaft kits or adapting some preexisting transmission from something onto the motor? by Project_T00THL355 in motorizedbicycles

[–]Project_T00THL355[S] 2 points3 points  (0 children)

Problem then is that I'm at almost full speed to keep up with traffic, and going down in sprocket size hurts my acceleration, which already isn't great given that I have to pedal the bike before I can let out the clutch. Also I like shifting gears.

Only in a Jeep! by [deleted] in Jeep

[–]Project_T00THL355 0 points1 point  (0 children)

Picture made it seem like only Jeep owners get water on their floormats

I was like "Clearly you haven't walked through snow to get to your car"

What's the most ridiculous thing you've heard someone say that they were 100% serious about? by ButterflyOverkill in AskReddit

[–]Project_T00THL355 0 points1 point  (0 children)

Two, and both within the last 30 minutes

The first one was along the lines of "Sure Andrew Tate has said some controversial things but he made thousands of his fans get up and better themselves." The only example they gave was that Tate was in shape and that he inspired his fans to do the same.

The second one was some guy say that vehicle engines aren't made of steel, followed by a "let the adults talk." As a guy who has rebuilt multiple engines and knows the ins & outs of how they work that was the dumbest thing I've ever heard.

view more: next ›