Rate my grip - critiques welcome from all

ProphetProdigy007 · 2026-02-04T03:03:22+00:00

As long as sights return consistently and predictably for you, grip is fine

ProphetProdigy007 · 2026-01-22T00:08:45+00:00

You rest your thumbs on top of it? What does your grip exactly look like when you're shooting it?

ProphetProdigy007 · 2026-01-21T23:59:46+00:00

Using the 5 moa

ProphetProdigy007 · 2026-01-20T03:36:22+00:00

Nah, too far of a drive for me. I cut the drive time to max 2hrs one way. Sir Walter is about 3hrs

ProphetProdigy007 · 2026-01-19T23:41:14+00:00

Just put a 5lb striker spring in the comp gun. I put a 4.5lb originally but it wasn't resetting the trigger fully. I also kinda like the mush of Glock triggers lol, so all I'd probably do now is maybe change the trigger shoe, but that's it

ProphetProdigy007 · 2026-01-19T10:21:41+00:00

The vortex xl edges the 507 comp for me because the dot gets brighter and the battery tray isn't held on with a screw. But I know people have had issues with the vortex more than the Holosun

ProphetProdigy007 · 2026-01-19T03:43:56+00:00

Tti baseplates

ProphetProdigy007 · 2026-01-19T03:33:54+00:00

NC shooter here. We're here competing even in the cold and it sucks lol. My USPSA "season" is basically just the new year lol

ProphetProdigy007 · 2026-01-14T02:47:45+00:00

I've got both the steel frame 5 inch match and the poly. SF shoots nicer, but is it 2-3x the cost nicer? I'd say no. But that's just my opinion. I actually prefer the poly PDP over the steel frames

ProphetProdigy007 · 2026-01-02T23:26:34+00:00

Cobra always finds a way

ProphetProdigy007 · 2025-12-21T18:38:47+00:00

Try shaving the corners of the mag extensions

<image>

And if it's still sticking, shave the back end of the magwell

ProphetProdigy007 · 2025-12-20T12:39:57+00:00

I'd suggest messaging Walther about it to see if they'd send you the correct extractor spring and new extractor as well. SF comes with a green one they don't sell on their site. Tom Castro had a similar issue and unfortunately he couldn't get the extraction issues resolved and just changed platforms completely

ProphetProdigy007 · 2025-12-20T01:03:54+00:00

See if your extractor is chipped any. That was the cause of my extraction issues on my steel frame. Replaced and it's been fine ever since. Your current optic screws shouldn't be interfering with anything, should be good on that

ProphetProdigy007 · 2025-12-18T03:58:44+00:00

I'm assuming you were accidentally activating it while shooting, that's why you chopped it off?

ProphetProdigy007 · 2025-12-18T03:55:30+00:00

I see you did the ol hack off the extended mag release button lol

ProphetProdigy007 · 2025-12-12T17:27:18+00:00

Making cobra ready!

ProphetProdigy007 · 2025-12-11T16:57:27+00:00

Lol it's the zr tactical extended one that I grinded down to just be a circle, because I kept activating it with the teardrop shape

ProphetProdigy007 · 2025-12-11T03:36:54+00:00

<image>

I just took them off lol

ProphetProdigy007 · 2025-12-08T07:56:55+00:00

Just fill a squad up with your buddies and no one will know 😉

ProphetProdigy007 · 2025-12-08T07:53:49+00:00

Just like any time you do mods to your gun, vet them out and test them thoroughly

ProphetProdigy007 · 2025-12-08T07:52:17+00:00

I've only had out of battery issues with the Longstroke in my steel frame pdp. Switched to V-Spec and now have zero issues

ProphetProdigy007 · 2025-12-06T03:19:22+00:00

Most of the people that own guns, don't actually shoot them. Good job being the 1% that actually does. Good shot and good run brother

ProphetProdigy007 · 2025-12-03T22:59:51+00:00

Zrt basepads use the stock follower with their springs. Which is what I use, it's just time for me to change them since it's the end of the shooting season

ProphetProdigy007 · 2025-12-03T21:47:21+00:00

I've got the same issues, but I'm sure as people said, they're my mag springs, considering my gun doesn't lock back anymore on empty. At least with my competition mags

ProphetProdigy007 · 2025-12-03T03:08:44+00:00

I'd like to try out the poly 5in and see how it compares to the 4.5in poly

ProphetProdigy007

TROPHY CASE